Network Appliance NS0-165 Practice Test 63
Question 620
Before changing the ONTAP storage service, the team observes: A database host suddenly exhibits high storage latency, and host logs show all I/O moved to a nonoptimized SAN path. Which evidence should the engineer examine FIRST?
- Review RAID health, failed drives, reconstruct progress, disk response and front-end latency.
- Correlate per-volume operations, CPU utilization, latency, and scan scheduling.
- Inspect host MPIO path state, switch faults, target LIF health and ONTAP LUN latency.
- Inspect busiest volumes, controller utilization, available target tiers and volume move eligibility.
Explanation
Correct Answer
C:Inspect host MPIO path state, switch faults, target LIF health and ONTAP LUN latency. SAN path failover and ALUA or ANA path selection affect effective storage latency. A controlled response is: Restore expected optimized paths and correct the underlying connectivity fault.
Incorrect Answers
A:Review RAID health, failed drives, reconstruct progress, disk response and front-end latency. For this problem, the better check is inspect host MPIO path state, switch faults, target LIF health and ONTAP LUN latency. The reason is that sAN path failover and ALUA or ANA path selection affect effective storage latency.
B:Correlate per-volume operations, CPU utilization, latency, and scan scheduling. For this problem, the better check is inspect host MPIO path state, switch faults, target LIF health and ONTAP LUN latency. The reason is that sAN path failover and ALUA or ANA path selection affect effective storage latency.
D:Inspect busiest volumes, controller utilization, available target tiers and volume move eligibility. For this problem, the better check is inspect host MPIO path state, switch faults, target LIF health and ONTAP LUN latency. The reason is that sAN path failover and ALUA or ANA path selection affect effective storage latency.
Question 621
The ONTAP operations team must address this issue: An ONTAP cluster approaches usable capacity limits, and a proposed shelf adds drives without checking supported shelf cabling or aggregate ownership. Which controlled engineering action is MOST appropriate?
- Size an appropriate supported AFF configuration against measured IOPS, throughput and usable capacity.
- Evaluate the appropriate ASA or ASA r2 architecture using current interoperability guidance and a host trial.
- Compare supported FAS capacity-oriented configurations against required response and recovery objectives.
- Plan supported shelf insertion, redundant cabling and post-install ownership validation with change control.
Explanation
Correct Answer
D:Plan supported shelf insertion, redundant cabling and post-install ownership validation with change control. Validate it by checking: New disks are visible and assigned correctly while existing data paths stay healthy. Physical expansion depends on supported disk and shelf combinations, cabling, ownership and capacity accounting.
Incorrect Answers
A:Size an appropriate supported AFF configuration against measured IOPS, throughput and usable capacity. The stated storage case instead calls for the more directly applicable engineering action: Plan supported shelf insertion, redundant cabling and post-install ownership validation with change control. The reason is that physical expansion depends on supported disk and shelf combinations, cabling, ownership and capacity accounting.
B:Evaluate the appropriate ASA or ASA r2 architecture using current interoperability guidance and a host trial. The stated storage case instead calls for the more directly applicable engineering action: Plan supported shelf insertion, redundant cabling and post-install ownership validation with change control. The reason is that physical expansion depends on supported disk and shelf combinations, cabling, ownership and capacity accounting.
C:Compare supported FAS capacity-oriented configurations against required response and recovery objectives. The stated storage case instead calls for the more directly applicable engineering action: Plan supported shelf insertion, redundant cabling and post-install ownership validation with change control. The reason is that physical expansion depends on supported disk and shelf combinations, cabling, ownership and capacity accounting.
Question 622
A NetApp storage administrator is addressing: A regional office archives large media datasets but also hosts modest virtual machines, and staff propose using premium flash for every cold copy. Which TWO complementary actions should the team take? Select TWO answers.
- Compare supported FAS capacity-oriented configurations against required response and recovery objectives.
- Size an appropriate supported AFF configuration against measured IOPS, throughput and usable capacity.
- Measure working-set activity, retention requirements, protocol access and available FAS hardware tiers.
- Execute a supported controller replacement with preserved ownership and explicit takeover-giveback checks.
- Plan supported shelf insertion, redundant cabling and post-install ownership validation with change control.
Explanation
Correct Answers
A:Compare supported FAS capacity-oriented configurations against required response and recovery objectives. Its complementary step is: Measure working-set activity, retention requirements, protocol access and available FAS hardware tiers. Together they address: Platform selection balances performance, capacity economics and supported configurations rather than using one tier for all data.
C:Measure working-set activity, retention requirements, protocol access and available FAS hardware tiers. Its complementary step is: Compare supported FAS capacity-oriented configurations against required response and recovery objectives. Together they address: Platform selection balances performance, capacity economics and supported configurations rather than using one tier for all data.
Incorrect Answers
B:Size an appropriate supported AFF configuration against measured IOPS, throughput and usable capacity. This could be useful for another system: A financial analytics service needs consistently low latency on random database reads while retiring aging spinning-disk arrays. For this situation, the necessary paired decisions are to examine (Measure working-set activity, retention requirements, protocol access and available FAS hardware tiers.) and to implement (Compare supported FAS capacity-oriented configurations against required response and recovery objectives.).
D:Execute a supported controller replacement with preserved ownership and explicit takeover-giveback checks. This could be useful for another system: An engineer plans to replace one controller with a different model during business hours and assumes matching power cords guarantee compatibility. For this situation, the necessary paired decisions are to examine (Measure working-set activity, retention requirements, protocol access and available FAS hardware tiers.) and to implement (Compare supported FAS capacity-oriented configurations against required response and recovery objectives.).
E:Plan supported shelf insertion, redundant cabling and post-install ownership validation with change control. This could be useful for another system: An ONTAP cluster approaches usable capacity limits, and a proposed shelf adds drives without checking supported shelf cabling or aggregate ownership. For this situation, the necessary paired decisions are to examine (Measure working-set activity, retention requirements, protocol access and available FAS hardware tiers.) and to implement (Compare supported FAS capacity-oriented configurations against required response and recovery objectives.).
Question 623
After applying the change, the team re-examines this condition: A new FC host sees the target port in its fabric but no usable LUN appears because the storage presentation steps are incomplete. Which result BEST verifies the improvement?
- The virtual cluster mounts block storage over the selected supported network and survives link loss.
- The authorized host discovers one correctly mapped disk via expected redundant FC paths.
- The hypervisor detects the expected device geometry and completes a safe read/write test.
- The Linux host discovers its intended disk with correct paths and unrelated LUNs remain hidden.
Explanation
Correct Answer
B:The authorized host discovers one correctly mapped disk via expected redundant FC paths. Implemented action: Configure approved FC zones and map the LUN to the correct host igroup with supported OS type. SAN access requires suitable fabric zoning, initiator grouping and LUN mapping rather than target visibility alone.
Incorrect Answers
A:The virtual cluster mounts block storage over the selected supported network and survives link loss. The stated storage case instead calls for the more directly applicable verification result: The authorized host discovers one correctly mapped disk via expected redundant FC paths. The reason is that sAN access requires suitable fabric zoning, initiator grouping and LUN mapping rather than target visibility alone.
C:The hypervisor detects the expected device geometry and completes a safe read/write test. The stated storage case instead calls for the more directly applicable verification result: The authorized host discovers one correctly mapped disk via expected redundant FC paths. The reason is that sAN access requires suitable fabric zoning, initiator grouping and LUN mapping rather than target visibility alone.
D:The Linux host discovers its intended disk with correct paths and unrelated LUNs remain hidden. The stated storage case instead calls for the more directly applicable verification result: The authorized host discovers one correctly mapped disk via expected redundant FC paths. The reason is that sAN access requires suitable fabric zoning, initiator grouping and LUN mapping rather than target visibility alone.
Question 624
The ONTAP operations team must address this issue: A storage team sets 9000-byte MTU on ONTAP but SAN clients experience intermittent stalls because an intermediate switch retains smaller frames. Which controlled engineering action is MOST appropriate?
- Set matching supported MTU across relevant interfaces and test the full end-to-end path.
- Align ONTAP VLAN ports and switch tagging to the approved storage network design.
- Design appropriate IPspace segregation and assign each SVM's LIFs to its network context.
- Configure a supported interface group and matching switch behavior with redundant members.
Explanation
Correct Answer
A:Set matching supported MTU across relevant interfaces and test the full end-to-end path. Validate it by checking: Representative large-packet traffic succeeds without MTU-related drops or regressions. Ethernet MTU must be supported consistently along the entire data path.
Incorrect Answers
B:Align ONTAP VLAN ports and switch tagging to the approved storage network design. The stated storage case instead calls for the more directly applicable engineering action: Set matching supported MTU across relevant interfaces and test the full end-to-end path. The reason is that ethernet MTU must be supported consistently along the entire data path.
C:Design appropriate IPspace segregation and assign each SVM's LIFs to its network context. The stated storage case instead calls for the more directly applicable engineering action: Set matching supported MTU across relevant interfaces and test the full end-to-end path. The reason is that ethernet MTU must be supported consistently along the entire data path.
D:Configure a supported interface group and matching switch behavior with redundant members. The stated storage case instead calls for the more directly applicable engineering action: Set matching supported MTU across relevant interfaces and test the full end-to-end path. The reason is that ethernet MTU must be supported consistently along the entire data path.
Question 625
A NetApp storage administrator is addressing: A storage architect replaces SCSI LUNs with NVMe namespaces but continues configuring SCSI ALUA software as the only path management. Which TWO complementary actions should the team take? Select TWO answers.
- Review host NVMe drivers, namespace identifiers, subsystem connectivity and ANA states.
- Configure supported NVMe/FC or NVMe/TCP host paths and multipath per compatibility guidance.
- Configure approved FC zones and map the LUN to the correct host igroup with supported OS type.
- Configure supported iSCSI discovery and host mapping with authenticated access where required.
- Create a correctly typed supported LUN and approved host igroup mapping.
Explanation
Correct Answers
A:Review host NVMe drivers, namespace identifiers, subsystem connectivity and ANA states. Its complementary step is: Configure supported NVMe/FC or NVMe/TCP host paths and multipath per compatibility guidance. Together they address: Supported NVMe hosts use appropriate NVMe multipath and Asymmetric Namespace Access semantics.
B:Configure supported NVMe/FC or NVMe/TCP host paths and multipath per compatibility guidance. Its complementary step is: Review host NVMe drivers, namespace identifiers, subsystem connectivity and ANA states. Together they address: Supported NVMe hosts use appropriate NVMe multipath and Asymmetric Namespace Access semantics.
Incorrect Answers
C:Configure approved FC zones and map the LUN to the correct host igroup with supported OS type. This could be useful for another system: A new FC host sees the target port in its fabric but no usable LUN appears because the storage presentation steps are incomplete. For this situation, the necessary paired decisions are to examine (Review host NVMe drivers, namespace identifiers, subsystem connectivity and ANA states.) and to implement (Configure supported NVMe/FC or NVMe/TCP host paths and multipath per compatibility guidance.).
D:Configure supported iSCSI discovery and host mapping with authenticated access where required. This could be useful for another system: A Linux host reaches a storage data IP but the initiator has not discovered a usable ONTAP iSCSI target. For this situation, the necessary paired decisions are to examine (Review host NVMe drivers, namespace identifiers, subsystem connectivity and ANA states.) and to implement (Configure supported NVMe/FC or NVMe/TCP host paths and multipath per compatibility guidance.).
E:Create a correctly typed supported LUN and approved host igroup mapping. This could be useful for another system: An admin creates a block LUN for a hypervisor using an arbitrary operating system type and deploys it before checking host utilities. For this situation, the necessary paired decisions are to examine (Review host NVMe drivers, namespace identifiers, subsystem connectivity and ANA states.) and to implement (Configure supported NVMe/FC or NVMe/TCP host paths and multipath per compatibility guidance.).
Question 626
A NetApp ONTAP storage review finds: A storage administrator sees cluster ports flapping but schedules a major scale-out to fix capacity alarms. Which principle BEST explains the underlying storage-administration concern?
- Lifecycle management must consider the complete supported ONTAP, disk, shelf and cluster-network firmware matrix.
- Scale-out decisions depend on compatible node families, networking, entitlements and volume placement.
- Expansion should not proceed over unresolved cluster-network or HA health faults.
- Workload balancing may use supported nondisruptive volume moves after reviewing aggregate and client constraints.
Explanation
Correct Answer
C:Expansion should not proceed over unresolved cluster-network or HA health faults. The engineer should first examine: Review cluster health alerts, port error counters, storage failover status and capacity projections. A focused corrective action is: Repair cluster connectivity and confirm supported health prerequisites before scaling.
Incorrect Answers
A:Lifecycle management must consider the complete supported ONTAP, disk, shelf and cluster-network firmware matrix. The stated storage case instead calls for the more directly applicable principle: Expansion should not proceed over unresolved cluster-network or HA health faults. The reason is that expansion should not proceed over unresolved cluster-network or HA health faults.
B:Scale-out decisions depend on compatible node families, networking, entitlements and volume placement. The stated storage case instead calls for the more directly applicable principle: Expansion should not proceed over unresolved cluster-network or HA health faults. The reason is that expansion should not proceed over unresolved cluster-network or HA health faults.
D:Workload balancing may use supported nondisruptive volume moves after reviewing aggregate and client constraints. The stated storage case instead calls for the more directly applicable principle: Expansion should not proceed over unresolved cluster-network or HA health faults. The reason is that expansion should not proceed over unresolved cluster-network or HA health faults.
Question 627
Before changing the ONTAP storage service, the team observes: Clients in one VLAN cannot contact a file LIF after a network migration, but clients in another segment still work. Which evidence should the engineer examine FIRST?
- Inspect LIF address, SVM routing table, connected networks, failover port and gateway reachability.
- Collect client ARP tables, ONTAP interface addresses, switch MAC learning and gateway routes.
- Review port error counters, optic or cable health, switch logs and link negotiation.
- Check LIF admin and operational status, current port, broadcast domain and port counters.
Explanation
Correct Answer
B:Collect client ARP tables, ONTAP interface addresses, switch MAC learning and gateway routes. IP-level client access depends on correct subnet, ARP, VLAN and gateway behavior. A controlled response is: Repair missing layer-2 adjacency or routing based on observed packet path.
Incorrect Answers
A:Inspect LIF address, SVM routing table, connected networks, failover port and gateway reachability. For this problem, the better check is collect client ARP tables, ONTAP interface addresses, switch MAC learning and gateway routes. The reason is that iP-level client access depends on correct subnet, ARP, VLAN and gateway behavior.
C:Review port error counters, optic or cable health, switch logs and link negotiation. For this problem, the better check is collect client ARP tables, ONTAP interface addresses, switch MAC learning and gateway routes. The reason is that iP-level client access depends on correct subnet, ARP, VLAN and gateway behavior.
D:Check LIF admin and operational status, current port, broadcast domain and port counters. For this problem, the better check is collect client ARP tables, ONTAP interface addresses, switch MAC learning and gateway routes. The reason is that iP-level client access depends on correct subnet, ARP, VLAN and gateway behavior.
Question 628
After applying the change, the team re-examines this condition: A tenant's SVM administrator can also change cluster security and other tenants' volumes due to an inherited broad role. Which result BEST verifies the improvement?
- The delegate manages approved tenant volumes but cannot modify cluster root policies.
- Approved clients connect with signing in effect and unsigned clients are rejected when required.
- Only named admins authenticate through the required factors and actions have individual audit trails.
- A controlled failed login is correlated to its identity and reaches the expected monitoring workflow.
Explanation
Correct Answer
A:The delegate manages approved tenant volumes but cannot modify cluster root policies. Implemented action: Replace broad assignments with approved least-privilege SVM roles and enforce reviews. RBAC and administration boundaries should prevent tenant delegates from exceeding SVM scope.
Incorrect Answers
B:Approved clients connect with signing in effect and unsigned clients are rejected when required. The stated storage case instead calls for the more directly applicable verification result: The delegate manages approved tenant volumes but cannot modify cluster root policies. The reason is that rBAC and administration boundaries should prevent tenant delegates from exceeding SVM scope.
C:Only named admins authenticate through the required factors and actions have individual audit trails. The stated storage case instead calls for the more directly applicable verification result: The delegate manages approved tenant volumes but cannot modify cluster root policies. The reason is that rBAC and administration boundaries should prevent tenant delegates from exceeding SVM scope.
D:A controlled failed login is correlated to its identity and reaches the expected monitoring workflow. The stated storage case instead calls for the more directly applicable verification result: The delegate manages approved tenant volumes but cannot modify cluster root policies. The reason is that rBAC and administration boundaries should prevent tenant delegates from exceeding SVM scope.
Question 629
Before changing the ONTAP storage service, the team observes: A growing database LUN must relocate to a less busy local tier, and the team proposes deleting the volume and recreating its path. Which evidence should the engineer examine FIRST?
- Review target tier capacity, LUN mappings, move compatibility and active client I/O.
- Review dataset file counts, directory layout, supported ONTAP version, node placement and scale targets.
- Inspect source snapshot, clone parent relationship, writable requirements and retained block lifetime.
- Inspect volume online state, junction path, export policy and parent namespace traversal.
Explanation
Correct Answer
A:Review target tier capacity, LUN mappings, move compatibility and active client I/O. Supported ONTAP volume move procedures can migrate data while preserving the logical storage service. A controlled response is: Perform a controlled supported volume move and monitor the cutover phase.
Incorrect Answers
B:Review dataset file counts, directory layout, supported ONTAP version, node placement and scale targets. For this problem, the better check is review target tier capacity, LUN mappings, move compatibility and active client I/O. The reason is that supported ONTAP volume move procedures can migrate data while preserving the logical storage service.
C:Inspect source snapshot, clone parent relationship, writable requirements and retained block lifetime. For this problem, the better check is review target tier capacity, LUN mappings, move compatibility and active client I/O. The reason is that supported ONTAP volume move procedures can migrate data while preserving the logical storage service.
D:Inspect volume online state, junction path, export policy and parent namespace traversal. For this problem, the better check is review target tier capacity, LUN mappings, move compatibility and active client I/O. The reason is that supported ONTAP volume move procedures can migrate data while preserving the logical storage service.
Question 630
A NetApp ONTAP storage review finds: A SAN design assumes every ONTAP release and platform supports the same simultaneous path topology at both sites. Which principle BEST explains the underlying storage-administration concern?
- Planned disaster-recovery switchovers require healthy relationships and validated prerequisites.
- Business continuity must be measured at the host and application layer, not only relationship metadata.
- SnapMirror active sync access and active-active configurations vary by ONTAP release and hardware family.
- Local controller HA and MetroCluster site-level disaster recovery address different failure domains.
Explanation
Correct Answer
C:SnapMirror active sync access and active-active configurations vary by ONTAP release and hardware family. The engineer should first examine: Review platform type, ONTAP release, supported host paths and replication mode documentation. A focused corrective action is: Choose a release-compatible active sync topology and host path configuration.
Incorrect Answers
A:Planned disaster-recovery switchovers require healthy relationships and validated prerequisites. The stated storage case instead calls for the more directly applicable principle: SnapMirror active sync access and active-active configurations vary by ONTAP release and hardware family. The reason is that snapMirror active sync access and active-active configurations vary by ONTAP release and hardware family.
B:Business continuity must be measured at the host and application layer, not only relationship metadata. The stated storage case instead calls for the more directly applicable principle: SnapMirror active sync access and active-active configurations vary by ONTAP release and hardware family. The reason is that snapMirror active sync access and active-active configurations vary by ONTAP release and hardware family.
D:Local controller HA and MetroCluster site-level disaster recovery address different failure domains. The stated storage case instead calls for the more directly applicable principle: SnapMirror active sync access and active-active configurations vary by ONTAP release and hardware family. The reason is that snapMirror active sync access and active-active configurations vary by ONTAP release and hardware family.