Microsoft AZ-700 Practice Test 62
Question 610
At Cedar Ridge Health, security needs deeper inspection for selected outbound encrypted web traffic. The networking change intended to correct this problem has been applied: Standard network-rule matching cannot inspect HTTPS content. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Test against a controlled indicator procedure and verify block event is logged
- Confirm approved inspected TLS flows succeed and configured threats are blocked
- Confirm an approved SQL-injection test pattern is detected while normal traffic succeeds
- Confirm app connectivity to platform endpoint without broad internet allow
Explanation
Correct Answer
B:
Standard network-rule matching cannot inspect HTTPS content. Confirm approved inspected TLS flows succeed and configured threats are blocked.
Incorrect Answers
A:
“Test against a controlled indicator procedure and verify block event is logged” concerns Current policy leaves threat-intelligence action in alert-only mode, not the actual network issue: Standard network-rule matching cannot inspect HTTPS content. Confirm approved inspected TLS flows succeed and configured threats are blocked.
C:
“Confirm an approved SQL-injection test pattern is detected while normal traffic succeeds” concerns The gateway only has manual IP restrictions rather than web-attack inspection, not the actual network issue: Standard network-rule matching cannot inspect HTTPS content. Confirm approved inspected TLS flows succeed and configured threats are blocked.
D:
“Confirm app connectivity to platform endpoint without broad internet allow” concerns Manually copied internet address lists are fragile, not the actual network issue: Standard network-rule matching cannot inspect HTTPS content. Confirm approved inspected TLS flows succeed and configured threats are blocked.
Question 611
At Lakeside Technology, a hub resolver forwards an Azure private zone to its own inbound endpoint. The observed problem is: Queries repeatedly recirculate because the ruleset is linked to the inbound-endpoint VNet. Before making any configuration changes, which investigation most directly isolates the specific problem?
- Inspect existing hub subnet names and the AzureFirewallSubnet prefix size
- Check which enabled suffix rule most specifically matches the requested FQDN
- Inspect forwarding-rule target IP and VNet links to identify the loop
- Inspect address space, subnet, NIC, and frontend IP-family support
Explanation
Correct Answer
C:
Queries repeatedly recirculate because the ruleset is linked to the inbound-endpoint VNet. Inspect forwarding-rule target IP and VNet links to identify the loop.
Incorrect Answers
A:
“Inspect existing hub subnet names and the AzureFirewallSubnet prefix size” concerns The selected hub has only a small general-purpose subnet available, not the actual network issue: Queries repeatedly recirculate because the ruleset is linked to the inbound-endpoint VNet. Inspect forwarding-rule target IP and VNet links to identify the loop.
B:
“Check which enabled suffix rule most specifically matches the requested FQDN” concerns Queries for secure.corp.example must use a separate hardened DNS server, not the actual network issue: Queries repeatedly recirculate because the ruleset is linked to the inbound-endpoint VNet. Inspect forwarding-rule target IP and VNet links to identify the loop.
D:
“Inspect address space, subnet, NIC, and frontend IP-family support” concerns The workload has only IPv4 private addressing and an IPv4 frontend, not the actual network issue: Queries repeatedly recirculate because the ruleset is linked to the inbound-endpoint VNet. Inspect forwarding-rule target IP and VNet links to identify the loop.
Question 612
At Fieldstone Pharma, a spoke app must access approved HTTPS package repositories. The approved change is intended to address: Security policy forbids unrestricted internet egress. Which configuration action best implements the solution?
- Create an appropriately scoped outbound rule for destination and TCP port 443
- Configure Premium TLS inspection policy and deploy trusted inspection CA to clients
- Configure a rule targeting the service tag and intended protocol/ports
- Add a scoped application rule for approved domains and HTTPS sources
Explanation
Correct Answer
D:
Security policy forbids unrestricted internet egress. Add a scoped application rule for approved domains and HTTPS sources.
Incorrect Answers
A:
“Create an appropriately scoped outbound rule for destination and TCP port 443” concerns The operator added an inbound allow rule but nothing changed, not the actual network issue: Security policy forbids unrestricted internet egress. Add a scoped application rule for approved domains and HTTPS sources.
B:
“Configure Premium TLS inspection policy and deploy trusted inspection CA to clients” concerns Standard network-rule matching cannot inspect HTTPS content, not the actual network issue: Security policy forbids unrestricted internet egress. Add a scoped application rule for approved domains and HTTPS sources.
C:
“Configure a rule targeting the service tag and intended protocol/ports” concerns Manually copied internet address lists are fragile, not the actual network issue: Security policy forbids unrestricted internet egress. Add a scoped application rule for approved domains and HTTPS sources.
Question 613
At Fieldstone Pharma, a team runs many application VMs in one subnet with intermittent outbound SNAT exhaustion. The networking change intended to correct this problem has been applied: The workload depends on a limited automatic outbound translation path. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Load-test outbound concurrency and verify translations use planned addresses
- Verify the endpoint NIC has a private address in that subnet
- Verify an approved administrator can reach a private VM through the Bastion session
- Confirm on-premises prefixes appear and traffic flows via the hub gateway
Explanation
Correct Answer
A:
The workload depends on a limited automatic outbound translation path. Load-test outbound concurrency and verify translations use planned addresses.
Incorrect Answers
B:
“Verify the endpoint NIC has a private address in that subnet” concerns The engineer confused the private endpoint subnet with the target storage service subnet, not the actual network issue: The workload depends on a limited automatic outbound translation path. Load-test outbound concurrency and verify translations use planned addresses.
C:
“Verify an approved administrator can reach a private VM through the Bastion session” concerns The VNet contains no AzureBastionSubnet of a supported size, not the actual network issue: The workload depends on a limited automatic outbound translation path. Load-test outbound concurrency and verify translations use planned addresses.
D:
“Confirm on-premises prefixes appear and traffic flows via the hub gateway” concerns The spoke can reach hub VMs but not on-premises networks, not the actual network issue: The workload depends on a limited automatic outbound translation path. Load-test outbound concurrency and verify translations use planned addresses.
Question 614
At Bluebell Insurance, a remote-access network must validate VPN users against existing RADIUS servers. The design must resolve this constraint: The team cannot migrate sign-in to Microsoft Entra ID for this rollout. Which architecture or control choice most directly meets that requirement?
- Represent all authorized on-premises prefixes on the correct local network gateway when not learned through BGP
- Use supported RADIUS authentication from an Azure VPN gateway P2S configuration
- Use diverse ExpressRoute circuits/peering locations with controlled failover design
- Choose an Azure-compatible Always On VPN architecture with supported device/user tunnel requirements
Explanation
Correct Answer
B:
The team cannot migrate sign-in to Microsoft Entra ID for this rollout. Use supported RADIUS authentication from an Azure VPN gateway P2S configuration.
Incorrect Answers
A:
“Represent all authorized on-premises prefixes on the correct local network gateway when not learned through BGP” concerns The Azure local network gateway object omits a newly added on-premises prefix, not the actual network issue: The team cannot migrate sign-in to Microsoft Entra ID for this rollout. Use supported RADIUS authentication from an Azure VPN gateway P2S configuration.
C:
“Use diverse ExpressRoute circuits/peering locations with controlled failover design” concerns All traffic currently depends on one circuit at one peering location, not the actual network issue: The team cannot migrate sign-in to Microsoft Entra ID for this rollout. Use supported RADIUS authentication from an Azure VPN gateway P2S configuration.
D:
“Choose an Azure-compatible Always On VPN architecture with supported device/user tunnel requirements” concerns A standard user-launched connection workflow does not satisfy auto-connect requirements, not the actual network issue: The team cannot migrate sign-in to Microsoft Entra ID for this rollout. Use supported RADIUS authentication from an Azure VPN gateway P2S configuration.
Question 615
At Foxglove Travel, a global documentation site repeatedly serves immutable images from a regional origin. The networking change intended to correct this problem has been applied: Every image request unnecessarily reaches the origin. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Connect with the public hostname and confirm a trusted matching certificate
- Request target paths and verify the expected response header is present
- Request the same asset repeatedly and verify edge cache hits with correct freshness
- Send requests with each host header and verify the correct site responds
Explanation
Correct Answer
C:
Every image request unnecessarily reaches the origin. Request the same asset repeatedly and verify edge cache hits with correct freshness.
Incorrect Answers
A:
“Connect with the public hostname and confirm a trusted matching certificate” concerns Custom domain ownership and managed TLS are not yet fully provisioned, not the actual network issue: Every image request unnecessarily reaches the origin. Request the same asset repeatedly and verify edge cache hits with correct freshness.
B:
“Request target paths and verify the expected response header is present” concerns Developers cannot deploy identical header updates across many backend applications, not the actual network issue: Every image request unnecessarily reaches the origin. Request the same asset repeatedly and verify edge cache hits with correct freshness.
D:
“Send requests with each host header and verify the correct site responds” concerns Requests need routing by HTTP host name rather than port alone, not the actual network issue: Every image request unnecessarily reaches the origin. Request the same asset repeatedly and verify edge cache hits with correct freshness.
Question 616
At Highland Research, a campus circuit should reach several spokes connected to a Standard Virtual WAN hub. The networking change intended to correct this problem has been applied: The ExpressRoute circuit is active but not attached to the virtual hub. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Verify port provisioning and circuit peering become operational
- Confirm requested branch and circuit connection types are configurable
- Simulate loss of one tunnel and verify continued branch reachability
- Verify the campus learns and reaches prefixes from intended VNet connections
Explanation
Correct Answer
D:
The ExpressRoute circuit is active but not attached to the virtual hub. Verify the campus learns and reaches prefixes from intended VNet connections.
Incorrect Answers
A:
“Verify port provisioning and circuit peering become operational” concerns A conventional provider-hosted circuit does not meet the direct port ownership requirement, not the actual network issue: The ExpressRoute circuit is active but not attached to the virtual hub. Verify the campus learns and reaches prefixes from intended VNet connections.
B:
“Confirm requested branch and circuit connection types are configurable” concerns The planned Virtual WAN Basic tier lacks required advanced connectivity features, not the actual network issue: The ExpressRoute circuit is active but not attached to the virtual hub. Verify the campus learns and reaches prefixes from intended VNet connections.
C:
“Simulate loss of one tunnel and verify continued branch reachability” concerns The current deployment terminates the tunnel on one active gateway instance, not the actual network issue: The ExpressRoute circuit is active but not attached to the virtual hub. Verify the campus learns and reaches prefixes from intended VNet connections.
Question 617
At Aurora Procurement, a subnet has a broad route to an NVA and a specific route for a sensitive /24. The observed problem is: Traffic to the sensitive /24 unexpectedly selects a different path. Before making any configuration changes, which investigation most directly isolates the specific problem?
- Compare effective routes and prefix lengths for the destination
- Inspect whether explicit routing/forwarding exists between the spokes
- Inspect the AzureBastionSubnet name and prefix against the Bastion SKU requirements
- Check which enabled suffix rule most specifically matches the requested FQDN
Explanation
Correct Answer
A:
Traffic to the sensitive /24 unexpectedly selects a different path. Compare effective routes and prefix lengths for the destination.
Incorrect Answers
B:
“Inspect whether explicit routing/forwarding exists between the spokes” concerns Architects assumed hub peering alone permits spoke-to-spoke communication, not the actual network issue: Traffic to the sensitive /24 unexpectedly selects a different path. Compare effective routes and prefix lengths for the destination.
C:
“Inspect the AzureBastionSubnet name and prefix against the Bastion SKU requirements” concerns The VNet contains no AzureBastionSubnet of a supported size, not the actual network issue: Traffic to the sensitive /24 unexpectedly selects a different path. Compare effective routes and prefix lengths for the destination.
D:
“Check which enabled suffix rule most specifically matches the requested FQDN” concerns Queries for secure.corp.example must use a separate hardened DNS server, not the actual network issue: Traffic to the sensitive /24 unexpectedly selects a different path. Compare effective routes and prefix lengths for the destination.
Question 618
At Granite Bay Retail, network operators need long-running latency and reachability measurements between Azure and a branch. The networking change intended to correct this problem has been applied: One-time ping tests do not reveal recurring connectivity degradation. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Confirm DDoS metrics and mitigation indicators are visible during approved testing
- Observe scheduled test results and latency when a controlled path issue occurs
- Confirm a VM in the linked spoke resolves the intended private A record
- Test application access over IPv4 and IPv6 separately
Explanation
Correct Answer
B:
One-time ping tests do not reveal recurring connectivity degradation. Observe scheduled test results and latency when a controlled path issue occurs.
Incorrect Answers
A:
“Confirm DDoS metrics and mitigation indicators are visible during approved testing” concerns The team has no clear mitigation telemetry for protected public IP resources, not the actual network issue: One-time ping tests do not reveal recurring connectivity degradation. Observe scheduled test results and latency when a controlled path issue occurs.
C:
“Confirm a VM in the linked spoke resolves the intended private A record” concerns The zone exists but has no virtual network link to the spoke, not the actual network issue: One-time ping tests do not reveal recurring connectivity degradation. Observe scheduled test results and latency when a controlled path issue occurs.
D:
“Test application access over IPv4 and IPv6 separately” concerns The workload has only IPv4 private addressing and an IPv4 frontend, not the actual network issue: One-time ping tests do not reveal recurring connectivity degradation. Observe scheduled test results and latency when a controlled path issue occurs.
Question 619
At Fairfield Foods, vMs were moved to a VNet with custom DNS server addresses. The team has addressed this networking issue: Existing VMs still query the previous DNS configuration. Which ongoing check would best monitor the relevant Azure feature service health, control operation, or configuration drift?
- Monitor alias record health and the target resource lifecycle
- Monitor route-advertisement and route-table drift for branch destinations
- Audit configured resolvers and VM DNS drift after network changes
- Monitor denied flows and effective security rule changes
Explanation
Correct Answer
C:
Existing VMs still query the previous DNS configuration. Audit configured resolvers and VM DNS drift after network changes.
Incorrect Answers
A:
“Monitor alias record health and the target resource lifecycle” concerns A conventional CNAME cannot be used at the zone apex, not the actual network issue: Existing VMs still query the previous DNS configuration. Audit configured resolvers and VM DNS drift after network changes.
B:
“Monitor route-advertisement and route-table drift for branch destinations” concerns The branch route may be overridden by a UDR or missing BGP propagation, not the actual network issue: Existing VMs still query the previous DNS configuration. Audit configured resolvers and VM DNS drift after network changes.
D:
“Monitor denied flows and effective security rule changes” concerns An NSG deny may be taking precedence over an allow, not the actual network issue: Existing VMs still query the previous DNS configuration. Audit configured resolvers and VM DNS drift after network changes.
Question 620
At Brookline Manufacturing, an old branch router supports only fixed selectors and a policy-based IPsec configuration. The team has addressed this networking issue: An engineer assumed all VPN gateway setups interoperate with any remote IKE parameters. Which ongoing check would best monitor the relevant Azure feature service health, control operation, or configuration drift?
- Monitor new spoke connections for missing route propagation
- Monitor automated VPN reconnect failures and gateway authentication events
- Track zone-redundant gateway configuration and connection health
- Monitor tunnel selector mismatch and IKE negotiation failures
Explanation
Correct Answer
D:
An engineer assumed all VPN gateway setups interoperate with any remote IKE parameters. Monitor tunnel selector mismatch and IKE negotiation failures.
Incorrect Answers
A:
“Monitor new spoke connections for missing route propagation” concerns Spoke address prefixes are not propagated into the branch's associated route table, not the actual network issue: An engineer assumed all VPN gateway setups interoperate with any remote IKE parameters. Monitor tunnel selector mismatch and IKE negotiation failures.
B:
“Monitor automated VPN reconnect failures and gateway authentication events” concerns A standard user-launched connection workflow does not satisfy auto-connect requirements, not the actual network issue: An engineer assumed all VPN gateway setups interoperate with any remote IKE parameters. Monitor tunnel selector mismatch and IKE negotiation failures.
C:
“Track zone-redundant gateway configuration and connection health” concerns The planned VPN Gateway SKU and public IP combination lacks appropriate zone resilience, not the actual network issue: An engineer assumed all VPN gateway setups interoperate with any remote IKE parameters. Monitor tunnel selector mismatch and IKE negotiation failures.