cert
cert-1
cert-2

Pass Microsoft AZ-700 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
AZ-700 Exam - Verified By Experts
AZ-700 Premium Bundle
$29.98

AZ-700 Premium Bundle

$79.99
$109.97
  • Premium File 406 Questions & Answers. Last update: Nov 08, 2026
  • Training Course 64 Video Lectures
  • Study Guide 762 Pages
 
$109.97
$79.99
accept 126 downloads in last 7 days
block-screenshots
Purchase Microsoft AZ-700 Exam Training Products Individually
Microsoft AZ-700 Premium File
Premium File 406 Q&A
$76.99$69.99
Microsoft AZ-700 Video Training Course
Training Course 64 Lectures
$21.99 $19.99
Microsoft AZ-700 PDF Study Guide
Study Guide 762 Pages
$21.99 $19.99
Microsoft AZ-700 Practice Test 52

Question 510

At Cobalt Analytics, a partner needs a stable small range of Azure public egress addresses for allowlisting. The design must resolve this constraint: Unrelated ad hoc public IPs cause repeated partner firewall changes. Which architecture or control choice most directly meets that requirement?

  1. Renumber one VNet into a nonoverlapping CIDR allocation before establishing peering
  2. Reserve a Public IP Prefix for a contiguous Azure-owned standard public address range
  3. Plan an explicit transit design with NVA/Firewall and UDRs or supported direct connectivity
  4. Use an Azure DNS alias record set for a supported Azure target at the zone apex

Explanation

Correct Answer

B:

Unrelated ad hoc public IPs cause repeated partner firewall changes. Reserve a Public IP Prefix for a contiguous Azure-owned standard public address range.

Incorrect Answers

A:

“Renumber one VNet into a nonoverlapping CIDR allocation before establishing peering” concerns Both VNets currently advertise the same 10.40.0.0/16 address space, not the actual network issue: Unrelated ad hoc public IPs cause repeated partner firewall changes. Reserve a Public IP Prefix for a contiguous Azure-owned standard public address range.

C:

“Plan an explicit transit design with NVA/Firewall and UDRs or supported direct connectivity” concerns Architects assumed hub peering alone permits spoke-to-spoke communication, not the actual network issue: Unrelated ad hoc public IPs cause repeated partner firewall changes. Reserve a Public IP Prefix for a contiguous Azure-owned standard public address range.

D:

“Use an Azure DNS alias record set for a supported Azure target at the zone apex” concerns A conventional CNAME cannot be used at the zone apex, not the actual network issue: Unrelated ad hoc public IPs cause repeated partner firewall changes. Reserve a Public IP Prefix for a contiguous Azure-owned standard public address range.

Question 511

At Bluebell Insurance, a ruleset contains forwarding targets for corp.example and secure.corp.example. The team has addressed this networking issue: Queries for secure.corp.example must use a separate hardened DNS server. Which ongoing check would best monitor the relevant Azure feature service health, control operation, or configuration drift?

  1. Alert on direct Internet default routes and loss of the firewall egress path
  2. Watch peering flags and learned gateway route availability
  3. Alert on unexpected forwarding targets for the sensitive suffix
  4. Monitor inbound endpoint reachability and forwarded-query failures

Explanation

Correct Answer

C:

Queries for secure.corp.example must use a separate hardened DNS server. Alert on unexpected forwarding targets for the sensitive suffix.

Incorrect Answers

A:

“Alert on direct Internet default routes and loss of the firewall egress path” concerns An existing route table sends 0.0.0.0/0 to Internet, not the actual network issue: Queries for secure.corp.example must use a separate hardened DNS server. Alert on unexpected forwarding targets for the sensitive suffix.

B:

“Watch peering flags and learned gateway route availability” concerns The spoke can reach hub VMs but not on-premises networks, not the actual network issue: Queries for secure.corp.example must use a separate hardened DNS server. Alert on unexpected forwarding targets for the sensitive suffix.

D:

“Monitor inbound endpoint reachability and forwarded-query failures” concerns On-premises queries cannot use Azure's VNet-scoped resolver directly, not the actual network issue: Queries for secure.corp.example must use a separate hardened DNS server. Alert on unexpected forwarding targets for the sensitive suffix.

Question 512

At Horizon Education, a VPN peer rejects security association negotiation although public endpoints are reachable. The design must resolve this constraint: The peer requires agreed encryption, integrity, DH, and PFS parameters. Which architecture or control choice most directly meets that requirement?

  1. Design an active-active Azure VPN gateway with appropriate redundant tunnels
  2. Choose an Azure-compatible Always On VPN architecture with supported device/user tunnel requirements
  3. Choose ExpressRoute Premium when required geographical connectivity exceeds standard scope
  4. Agree on a mutually supported IKE and IPsec algorithm suite for the connection

Explanation

Correct Answer

D:

The peer requires agreed encryption, integrity, DH, and PFS parameters. Agree on a mutually supported IKE and IPsec algorithm suite for the connection.

Incorrect Answers

A:

“Design an active-active Azure VPN gateway with appropriate redundant tunnels” concerns The current deployment terminates the tunnel on one active gateway instance, not the actual network issue: The peer requires agreed encryption, integrity, DH, and PFS parameters. Agree on a mutually supported IKE and IPsec algorithm suite for the connection.

B:

“Choose an Azure-compatible Always On VPN architecture with supported device/user tunnel requirements” concerns A standard user-launched connection workflow does not satisfy auto-connect requirements, not the actual network issue: The peer requires agreed encryption, integrity, DH, and PFS parameters. Agree on a mutually supported IKE and IPsec algorithm suite for the connection.

C:

“Choose ExpressRoute Premium when required geographical connectivity exceeds standard scope” concerns Current circuit tier limits required VNet cross-region reach, not the actual network issue: The peer requires agreed encryption, integrity, DH, and PFS parameters. Agree on a mutually supported IKE and IPsec algorithm suite for the connection.

Question 513

At Fieldstone Pharma, critical hybrid workloads need resilience to a single ExpressRoute peering-location outage. The design must resolve this constraint: All traffic currently depends on one circuit at one peering location. Which architecture or control choice most directly meets that requirement?

  1. Use diverse ExpressRoute circuits/peering locations with controlled failover design
  2. Resolve missing Azure prefix advertisement before changing application security policies
  3. Use a Virtual WAN hub ExpressRoute gateway and connect the authorized circuit
  4. Design an active-active Azure VPN gateway with appropriate redundant tunnels

Explanation

Correct Answer

A:

All traffic currently depends on one circuit at one peering location. Use diverse ExpressRoute circuits/peering locations with controlled failover design.

Incorrect Answers

B:

“Resolve missing Azure prefix advertisement before changing application security policies” concerns The expected VNet prefix is not present in the received BGP route table, not the actual network issue: All traffic currently depends on one circuit at one peering location. Use diverse ExpressRoute circuits/peering locations with controlled failover design.

C:

“Use a Virtual WAN hub ExpressRoute gateway and connect the authorized circuit” concerns The ExpressRoute circuit is active but not attached to the virtual hub, not the actual network issue: All traffic currently depends on one circuit at one peering location. Use diverse ExpressRoute circuits/peering locations with controlled failover design.

D:

“Design an active-active Azure VPN gateway with appropriate redundant tunnels” concerns The current deployment terminates the tunnel on one active gateway instance, not the actual network issue: All traffic currently depends on one circuit at one peering location. Use diverse ExpressRoute circuits/peering locations with controlled failover design.

Question 514

At Ironwood Consulting, a globally distributed site needs anycast edge entry and dynamic acceleration to origins. The design must resolve this constraint: Regional-only ingress increases end-user latency outside the deployment region. Which architecture or control choice most directly meets that requirement?

  1. Use Weighted traffic routing on the Traffic Manager profile
  2. Use Azure Front Door Standard/Premium for global Layer 7 edge delivery
  3. Design the origin host header and health probe to match what the app actually serves
  4. Plan explicit outbound rules and adequate frontend IP/SNAT port allocation

Explanation

Correct Answer

B:

Regional-only ingress increases end-user latency outside the deployment region. Use Azure Front Door Standard/Premium for global Layer 7 edge delivery.

Incorrect Answers

A:

“Use Weighted traffic routing on the Traffic Manager profile” concerns DNS routing should reflect configured weights rather than client source geography, not the actual network issue: Regional-only ingress increases end-user latency outside the deployment region. Use Azure Front Door Standard/Premium for global Layer 7 edge delivery.

C:

“Design the origin host header and health probe to match what the app actually serves” concerns Origin expects a specific Host header on the configured probe endpoint, not the actual network issue: Regional-only ingress increases end-user latency outside the deployment region. Use Azure Front Door Standard/Premium for global Layer 7 edge delivery.

D:

“Plan explicit outbound rules and adequate frontend IP/SNAT port allocation” concerns The default outbound configuration has insufficient SNAT capacity, not the actual network issue: Regional-only ingress increases end-user latency outside the deployment region. Use Azure Front Door Standard/Premium for global Layer 7 edge delivery.

Question 515

At Summit Distribution, azure VMs need to reach a storage account using a subnet identity while retaining the service public endpoint. The networking change intended to correct this problem has been applied: Storage firewall currently allows arbitrary public clients. Which validation is the strongest evidence that the stated requirement is now satisfied?

  1. Approve a consumer endpoint and test private TCP access across provider/consumer VNets
  2. Fail the primary region and verify clients resolve and connect to the healthy regional endpoint
  3. Test an allowed subnet client succeeds and an unlisted network is denied
  4. Connect from approved subnet and reject a nonlisted public network

Explanation

Correct Answer

C:

Storage firewall currently allows arbitrary public clients. Test an allowed subnet client succeeds and an unlisted network is denied.

Incorrect Answers

A:

“Approve a consumer endpoint and test private TCP access across provider/consumer VNets” concerns Other Azure customers need approved private access without public exposure, not the actual network issue: Storage firewall currently allows arbitrary public clients. Test an allowed subnet client succeeds and an unlisted network is denied.

B:

“Fail the primary region and verify clients resolve and connect to the healthy regional endpoint” concerns One region's private endpoint becomes unavailable during failover, not the actual network issue: Storage firewall currently allows arbitrary public clients. Test an allowed subnet client succeeds and an unlisted network is denied.

D:

“Connect from approved subnet and reject a nonlisted public network” concerns Only a server-level IP firewall allowlist currently controls clients, not the actual network issue: Storage firewall currently allows arbitrary public clients. Test an allowed subnet client succeeds and an unlisted network is denied.

Question 516

At Brookline Manufacturing, a public application has tested WAF rules and must actively reject malicious matching requests. The networking change intended to correct this problem has been applied: The policy is still in Detection mode so matches are only logged. Which validation is the strongest evidence that the stated requirement is now satisfied?

  1. Trigger a controlled WAF rule and verify the matching policy records or blocks it according to mode
  2. Add a new role VM and confirm intended inter-role traffic rule still applies
  3. Resolve a test FQDN and confirm firewall matching uses consistent destination mapping
  4. Send a permitted request and controlled blocked test request and confirm distinct outcomes

Explanation

Correct Answer

D:

The policy is still in Detection mode so matches are only logged. Send a permitted request and controlled blocked test request and confirm distinct outcomes.

Incorrect Answers

A:

“Trigger a controlled WAF rule and verify the matching policy records or blocks it according to mode” concerns The app uses a gateway without the intended listener-level WAF policy association, not the actual network issue: The policy is still in Detection mode so matches are only logged. Send a permitted request and controlled blocked test request and confirm distinct outcomes.

B:

“Add a new role VM and confirm intended inter-role traffic rule still applies” concerns Source IP-based NSG rules are brittle as instances scale, not the actual network issue: The policy is still in Detection mode so matches are only logged. Send a permitted request and controlled blocked test request and confirm distinct outcomes.

C:

“Resolve a test FQDN and confirm firewall matching uses consistent destination mapping” concerns Inconsistent DNS decisions lead to intermittent destination rule mismatch, not the actual network issue: The policy is still in Detection mode so matches are only logged. Send a permitted request and controlled blocked test request and confirm distinct outcomes.

Question 517

At Oakbridge Logistics, a service has a private endpoint in a shared services VNet. The design must resolve this constraint: A peered application VNet resolves the service publicly. Which architecture or control choice most directly meets that requirement?

  1. Link the service's private DNS zone to every VNet that must resolve the shared endpoint
  2. Use SQL VNet firewall rules tied to a subnet enabled for Microsoft.Sql service endpoints
  3. Use a private endpoint for the blob subresource with correct private DNS integration
  4. Enable the correct service endpoint on the new source subnet before relying on the rule

Explanation

Correct Answer

A:

Link the service's private DNS zone to every VNet that must resolve the shared endpoint. Private endpoint traffic still needs DNS resolution of the service FQDN to its endpoint private IP. VNet peering alone does not link the private DNS zone for every consuming VNet.

Incorrect Answers

B:

“Use SQL VNet firewall rules tied to a subnet enabled for Microsoft.Sql service endpoints” concerns Only a server-level IP firewall allowlist currently controls clients, not the actual network issue: A peered application VNet resolves the service publicly. Link the service's private DNS zone to every VNet that must resolve the shared endpoint. Private endpoint traffic still needs DNS resolution of the service FQDN to its endpoint private IP. VNet peering alone does not link the private DNS zone for every consuming VNet.

C:

“Use a private endpoint for the blob subresource with correct private DNS integration” concerns The app still resolves its storage hostname to a public endpoint, not the actual network issue: A peered application VNet resolves the service publicly. Link the service's private DNS zone to every VNet that must resolve the shared endpoint. Private endpoint traffic still needs DNS resolution of the service FQDN to its endpoint private IP. VNet peering alone does not link the private DNS zone for every consuming VNet.

D:

“Enable the correct service endpoint on the new source subnet before relying on the rule” concerns Connections still fail after moving the application into a replacement subnet, not the actual network issue: A peered application VNet resolves the service publicly. Link the service's private DNS zone to every VNet that must resolve the shared endpoint. Private endpoint traffic still needs DNS resolution of the service FQDN to its endpoint private IP. VNet peering alone does not link the private DNS zone for every consuming VNet.

Question 518

At Meridian Media, administrators need browser-based RDP and SSH without VM public IPs. The approved change is intended to address: The VNet contains no AzureBastionSubnet of a supported size. Which configuration action best implements the solution?

  1. Create the root A/AAAA alias record referencing the supported Azure resource
  2. Create AzureBastionSubnet and deploy Azure Bastion without exposing target VM public IPs
  3. Add selected VNets to a group and deploy the connectivity configuration to intended regions
  4. Configure IPv6 VNet/subnet ranges and supported IPv6-enabled frontend resources

Explanation

Correct Answer

B:

Create AzureBastionSubnet and deploy Azure Bastion without exposing target VM public IPs. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.

Incorrect Answers

A:

“Create the root A/AAAA alias record referencing the supported Azure resource” concerns A conventional CNAME cannot be used at the zone apex, not the actual network issue: The VNet contains no AzureBastionSubnet of a supported size. Create AzureBastionSubnet and deploy Azure Bastion without exposing target VM public IPs. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.

C:

“Add selected VNets to a group and deploy the connectivity configuration to intended regions” concerns Manual peering has left several newly created spokes disconnected, not the actual network issue: The VNet contains no AzureBastionSubnet of a supported size. Create AzureBastionSubnet and deploy Azure Bastion without exposing target VM public IPs. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.

D:

“Configure IPv6 VNet/subnet ranges and supported IPv6-enabled frontend resources” concerns The workload has only IPv4 private addressing and an IPv4 frontend, not the actual network issue: The VNet contains no AzureBastionSubnet of a supported size. Create AzureBastionSubnet and deploy Azure Bastion without exposing target VM public IPs. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.

Question 519

At Falcon Works, a pair of spoke VNets each peer only with the same hub. The approved change is intended to address: Architects assumed hub peering alone permits spoke-to-spoke communication. Which configuration action best implements the solution?

  1. Remove the offending hub ruleset link while retaining required spoke links
  2. Create the private DNS zone VNet link for the spoke
  3. Configure the required direct peering or hub transit routes and forwarding controls
  4. Create a NAT Gateway with public IP resources and associate it to the workload subnet

Explanation

Correct Answer

C:

Architects assumed hub peering alone permits spoke-to-spoke communication. Configure the required direct peering or hub transit routes and forwarding controls.

Incorrect Answers

A:

“Remove the offending hub ruleset link while retaining required spoke links” concerns Queries repeatedly recirculate because the ruleset is linked to the inbound-endpoint VNet, not the actual network issue: Architects assumed hub peering alone permits spoke-to-spoke communication. Configure the required direct peering or hub transit routes and forwarding controls.

B:

“Create the private DNS zone VNet link for the spoke” concerns The zone exists but has no virtual network link to the spoke, not the actual network issue: Architects assumed hub peering alone permits spoke-to-spoke communication. Configure the required direct peering or hub transit routes and forwarding controls.

D:

“Create a NAT Gateway with public IP resources and associate it to the workload subnet” concerns VM egress uses default outbound access and source addresses cannot be allowlisted, not the actual network issue: Architects assumed hub peering alone permits spoke-to-spoke communication. Configure the required direct peering or hub transit routes and forwarding controls.

Question 520

At Evergreen Services, vMs behind a regional public Load Balancer intermittently fail outbound connections. The approved change is intended to address: The default outbound configuration has insufficient SNAT capacity. Which configuration action best implements the solution?

  1. Configure rule matching /v1/* with internal rewrite to /api/v2/*
  2. Associate each validated custom domain with its correct route and origin group
  3. Configure priority order, monitor path, and endpoint probe settings
  4. Configure an outbound rule with suitable allocated SNAT ports and frontend IPs

Explanation

Correct Answer

D:

The default outbound configuration has insufficient SNAT capacity. Configure an outbound rule with suitable allocated SNAT ports and frontend IPs.

Incorrect Answers

A:

“Configure rule matching /v1/* with internal rewrite to /api/v2/*” concerns Clients should retain the original requested URL in the browser, not the actual network issue: The default outbound configuration has insufficient SNAT capacity. Configure an outbound rule with suitable allocated SNAT ports and frontend IPs.

B:

“Associate each validated custom domain with its correct route and origin group” concerns Both domains were accidentally attached to the same catchall route, not the actual network issue: The default outbound configuration has insufficient SNAT capacity. Configure an outbound rule with suitable allocated SNAT ports and frontend IPs.

C:

“Configure priority order, monitor path, and endpoint probe settings” concerns Secondary endpoint should receive traffic only when primary monitoring reports failure, not the actual network issue: The default outbound configuration has insufficient SNAT capacity. Configure an outbound rule with suitable allocated SNAT ports and frontend IPs.

Designing and Implementing Microsoft Azure Networking Solutions (AZ-700) Practice Tests