Microsoft AZ-700 Practice Test 18
Question 170
At Horizon Education, a newly provisioned storage account private endpoint uses a stale manually managed A record. The networking change intended to correct this problem has been applied: The endpoint IP changes after redeployment and name resolution fails. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Attempt access to allowed and disallowed Storage accounts from the subnet
- Reprovision in a test and verify DNS record tracks the endpoint private IP
- Check the endpoint NIC is reachable from authorized consumer segments
- Connect from approved subnet and reject a nonlisted public network
Explanation
Correct Answer
B:
The endpoint IP changes after redeployment and name resolution fails. Reprovision in a test and verify DNS record tracks the endpoint private IP.
Incorrect Answers
A:
“Attempt access to allowed and disallowed Storage accounts from the subnet” concerns Enabling Microsoft.Storage alone does not restrict which accounts can be reached, not the actual network issue: The endpoint IP changes after redeployment and name resolution fails. Reprovision in a test and verify DNS record tracks the endpoint private IP.
C:
“Check the endpoint NIC is reachable from authorized consumer segments” concerns The consumer application network needs local private routing to the service, not the actual network issue: The endpoint IP changes after redeployment and name resolution fails. Reprovision in a test and verify DNS record tracks the endpoint private IP.
D:
“Connect from approved subnet and reject a nonlisted public network” concerns Only a server-level IP firewall allowlist currently controls clients, not the actual network issue: The endpoint IP changes after redeployment and name resolution fails. Reprovision in a test and verify DNS record tracks the endpoint private IP.
Question 171
At Ironwood Consulting, a globally distributed site needs anycast edge entry and dynamic acceleration to origins. The networking change intended to correct this problem has been applied: Regional-only ingress increases end-user latency outside the deployment region. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Disable the app listener on a test VM and confirm new flows avoid it
- Fail a regional backend and test connection to surviving region
- Test client access from distinct regions and observe expected origin routing
- Call the legacy URL and verify backend receives rewritten path without 3xx response
Explanation
Correct Answer
C:
Regional-only ingress increases end-user latency outside the deployment region. Test client access from distinct regions and observe expected origin routing.
Incorrect Answers
A:
“Disable the app listener on a test VM and confirm new flows avoid it” concerns A stopped VM continues receiving connections because the probe is misconfigured, not the actual network issue: Regional-only ingress increases end-user latency outside the deployment region. Test client access from distinct regions and observe expected origin routing.
B:
“Fail a regional backend and test connection to surviving region” concerns The existing load balancer only distributes within one Azure region, not the actual network issue: Regional-only ingress increases end-user latency outside the deployment region. Test client access from distinct regions and observe expected origin routing.
D:
“Call the legacy URL and verify backend receives rewritten path without 3xx response” concerns Clients should retain the original requested URL in the browser, not the actual network issue: Regional-only ingress increases end-user latency outside the deployment region. Test client access from distinct regions and observe expected origin routing.
Question 172
At Horizon Education, a newly provisioned storage account private endpoint uses a stale manually managed A record. The observed problem is: The endpoint IP changes after redeployment and name resolution fails. Before making any configuration changes, which investigation most directly isolates the specific problem?
- Identify which source subnets and VNet rules currently authorize access
- Inspect whether service frontend uses a supported Standard Load Balancer
- Inspect whether the service uses a service endpoint or a private endpoint
- Inspect DNS zone group association and current private endpoint IP record
Explanation
Correct Answer
D:
The endpoint IP changes after redeployment and name resolution fails. Inspect DNS zone group association and current private endpoint IP record.
Incorrect Answers
A:
“Identify which source subnets and VNet rules currently authorize access” concerns The current storage VNet rule grants access to the entire shared subnet, not the actual network issue: The endpoint IP changes after redeployment and name resolution fails. Inspect DNS zone group association and current private endpoint IP record.
B:
“Inspect whether service frontend uses a supported Standard Load Balancer” concerns Other Azure customers need approved private access without public exposure, not the actual network issue: The endpoint IP changes after redeployment and name resolution fails. Inspect DNS zone group association and current private endpoint IP record.
C:
“Inspect whether the service uses a service endpoint or a private endpoint” concerns DNS still returns public storage service addresses, causing confusion, not the actual network issue: The endpoint IP changes after redeployment and name resolution fails. Inspect DNS zone group association and current private endpoint IP record.
Question 173
At Horizon Education, a legitimate JSON API payload is blocked by one WAF managed rule. The approved change is intended to address: Developers want to disable the entire WAF policy to restore service. Which configuration action best implements the solution?
- Configure a precise exclusion for the verified parameter/rule and keep other rules enabled
- Update the relevant subnet NSG to permit only the authorized flow
- Configure the security policy association for selected Front Door domains
- Enable VNet flow logs with approved storage and analytics integration
Explanation
Correct Answer
A:
Developers want to disable the entire WAF policy to restore service. Configure a precise exclusion for the verified parameter/rule and keep other rules enabled.
Incorrect Answers
B:
“Update the relevant subnet NSG to permit only the authorized flow” concerns An allow in the NIC NSG is insufficient because the subnet NSG denies the traffic, not the actual network issue: Developers want to disable the entire WAF policy to restore service. Configure a precise exclusion for the verified parameter/rule and keep other rules enabled.
C:
“Configure the security policy association for selected Front Door domains” concerns The WAF policy exists but isn't associated with relevant endpoint/domain, not the actual network issue: Developers want to disable the entire WAF policy to restore service. Configure a precise exclusion for the verified parameter/rule and keep other rules enabled.
D:
“Enable VNet flow logs with approved storage and analytics integration” concerns Legacy new NSG flow logs are no longer offered for creation, not the actual network issue: Developers want to disable the entire WAF policy to restore service. Configure a precise exclusion for the verified parameter/rule and keep other rules enabled.
Question 174
At Cedar Ridge Health, a company will need branch VPN plus ExpressRoute and inter-hub transit across regions. The design must resolve this constraint: The planned Virtual WAN Basic tier lacks required advanced connectivity features. Which architecture or control choice most directly meets that requirement?
- Use a Virtual WAN hub ExpressRoute gateway and connect the authorized circuit
- Choose Standard Virtual WAN for the full-featured hub and connectivity architecture
- Choose ExpressRoute Direct for the supported direct physical port model
- Base the fix on tunnel negotiation and connection-state evidence rather than VM NSG policy
Explanation
Correct Answer
B:
The planned Virtual WAN Basic tier lacks required advanced connectivity features. Choose Standard Virtual WAN for the full-featured hub and connectivity architecture.
Incorrect Answers
A:
“Use a Virtual WAN hub ExpressRoute gateway and connect the authorized circuit” concerns The ExpressRoute circuit is active but not attached to the virtual hub, not the actual network issue: The planned Virtual WAN Basic tier lacks required advanced connectivity features. Choose Standard Virtual WAN for the full-featured hub and connectivity architecture.
C:
“Choose ExpressRoute Direct for the supported direct physical port model” concerns A conventional provider-hosted circuit does not meet the direct port ownership requirement, not the actual network issue: The planned Virtual WAN Basic tier lacks required advanced connectivity features. Choose Standard Virtual WAN for the full-featured hub and connectivity architecture.
D:
“Base the fix on tunnel negotiation and connection-state evidence rather than VM NSG policy” concerns Engineers can ping Azure public endpoints but cannot establish IKE, not the actual network issue: The planned Virtual WAN Basic tier lacks required advanced connectivity features. Choose Standard Virtual WAN for the full-featured hub and connectivity architecture.
Question 175
At Meridian Media, administrators need browser-based RDP and SSH without VM public IPs. The design must resolve this constraint: The VNet contains no AzureBastionSubnet of a supported size. Which architecture or control choice most directly meets that requirement?
- Renumber one VNet into a nonoverlapping CIDR allocation before establishing peering
- Use the storage service's appropriate privatelink private DNS zone with an A record for the endpoint
- Reserve the dedicated AzureBastionSubnet with /26 or larger address capacity
- Use the appropriate Azure DDoS Network Protection plan for protected VNets/public IP workloads
Explanation
Correct Answer
C:
Reserve the dedicated AzureBastionSubnet with /26 or larger address capacity. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.
Incorrect Answers
A:
“Renumber one VNet into a nonoverlapping CIDR allocation before establishing peering” concerns Both VNets currently advertise the same 10.40.0.0/16 address space, not the actual network issue: The VNet contains no AzureBastionSubnet of a supported size. Reserve the dedicated AzureBastionSubnet with /26 or larger address capacity. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.
B:
“Use the storage service's appropriate privatelink private DNS zone with an A record for the endpoint” concerns The consumer VNet lacks the required privatelink DNS record association, not the actual network issue: The VNet contains no AzureBastionSubnet of a supported size. Reserve the dedicated AzureBastionSubnet with /26 or larger address capacity. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.
D:
“Use the appropriate Azure DDoS Network Protection plan for protected VNets/public IP workloads” concerns The team has no clear mitigation telemetry for protected public IP resources, not the actual network issue: The VNet contains no AzureBastionSubnet of a supported size. Reserve the dedicated AzureBastionSubnet with /26 or larger address capacity. Azure Bastion must be deployed in a dedicated subnet named AzureBastionSubnet with sufficient prefix space for the chosen SKU; target VMs need not expose individual public IPs.
Question 176
At Northstar Finance, a hybrid network requires an Azure VPN virtual network gateway. The observed problem is: Gateway deployment is blocked because the gateway subnet is missing. Before making any configuration changes, which investigation most directly isolates the specific problem?
- Inspect peering flags, gateway routes, and whether the spoke owns a gateway
- Inspect the AzureBastionSubnet name and prefix against the Bastion SKU requirements
- Check which enabled suffix rule most specifically matches the requested FQDN
- Check whether the VNet has an appropriately sized subnet named GatewaySubnet
Explanation
Correct Answer
D:
Gateway deployment is blocked because the gateway subnet is missing. Check whether the VNet has an appropriately sized subnet named GatewaySubnet.
Incorrect Answers
A:
“Inspect peering flags, gateway routes, and whether the spoke owns a gateway” concerns The spoke can reach hub VMs but not on-premises networks, not the actual network issue: Gateway deployment is blocked because the gateway subnet is missing. Check whether the VNet has an appropriately sized subnet named GatewaySubnet.
B:
“Inspect the AzureBastionSubnet name and prefix against the Bastion SKU requirements” concerns The VNet contains no AzureBastionSubnet of a supported size, not the actual network issue: Gateway deployment is blocked because the gateway subnet is missing. Check whether the VNet has an appropriately sized subnet named GatewaySubnet.
C:
“Check which enabled suffix rule most specifically matches the requested FQDN” concerns Queries for secure.corp.example must use a separate hardened DNS server, not the actual network issue: Gateway deployment is blocked because the gateway subnet is missing. Check whether the VNet has an appropriately sized subnet named GatewaySubnet.
Question 177
At Aspen Ridge Software, a VM subnet has a broad allow at priority 300 and a targeted deny at priority 200. The approved change is intended to address: Operators assumed lower number means lower precedence. Which configuration action best implements the solution?
- Set the targeted deny rule at a smaller priority number than the broad allow
- Configure a rule targeting the service tag and intended protocol/ports
- Add a scoped application rule for approved domains and HTTPS sources
- Configure the security policy association for selected Front Door domains
Explanation
Correct Answer
A:
Operators assumed lower number means lower precedence. Set the targeted deny rule at a smaller priority number than the broad allow.
Incorrect Answers
B:
“Configure a rule targeting the service tag and intended protocol/ports” concerns Manually copied internet address lists are fragile, not the actual network issue: Operators assumed lower number means lower precedence. Set the targeted deny rule at a smaller priority number than the broad allow.
C:
“Add a scoped application rule for approved domains and HTTPS sources” concerns Security policy forbids unrestricted internet egress, not the actual network issue: Operators assumed lower number means lower precedence. Set the targeted deny rule at a smaller priority number than the broad allow.
D:
“Configure the security policy association for selected Front Door domains” concerns The WAF policy exists but isn't associated with relevant endpoint/domain, not the actual network issue: Operators assumed lower number means lower precedence. Set the targeted deny rule at a smaller priority number than the broad allow.
Question 178
At Lakeside Technology, a subnet's outbound HTTPS to an approved service is blocked. The approved change is intended to address: The operator added an inbound allow rule but nothing changed. Which configuration action best implements the solution?
- Create DNAT configuration with matching public IP, protocol and target private IP
- Create an appropriately scoped outbound rule for destination and TCP port 443
- Configure a rule targeting the service tag and intended protocol/ports
- Configure Premium TLS inspection policy and deploy trusted inspection CA to clients
Explanation
Correct Answer
B:
The operator added an inbound allow rule but nothing changed. Create an appropriately scoped outbound rule for destination and TCP port 443.
Incorrect Answers
A:
“Create DNAT configuration with matching public IP, protocol and target private IP” concerns Inbound packets arrive at Azure Firewall public IP but have no translation, not the actual network issue: The operator added an inbound allow rule but nothing changed. Create an appropriately scoped outbound rule for destination and TCP port 443.
C:
“Configure a rule targeting the service tag and intended protocol/ports” concerns Manually copied internet address lists are fragile, not the actual network issue: The operator added an inbound allow rule but nothing changed. Create an appropriately scoped outbound rule for destination and TCP port 443.
D:
“Configure Premium TLS inspection policy and deploy trusted inspection CA to clients” concerns Standard network-rule matching cannot inspect HTTPS content, not the actual network issue: The operator added an inbound allow rule but nothing changed. Create an appropriately scoped outbound rule for destination and TCP port 443.
Question 179
At Beacon Manufacturing, a subnet's VMs need stable scalable outbound public translation without individual public IPs. The team has addressed this networking issue: VM egress uses default outbound access and source addresses cannot be allowlisted. Which ongoing check would best monitor the relevant Azure feature service health, control operation, or configuration drift?
- Alert on direct Internet default routes and loss of the firewall egress path
- Monitor denied flows and effective security rule changes
- Watch NAT SNAT port utilization and failed outbound connections
- Monitor alias record health and the target resource lifecycle
Explanation
Correct Answer
C:
VM egress uses default outbound access and source addresses cannot be allowlisted. Watch NAT SNAT port utilization and failed outbound connections.
Incorrect Answers
A:
“Alert on direct Internet default routes and loss of the firewall egress path” concerns An existing route table sends 0.0.0.0/0 to Internet, not the actual network issue: VM egress uses default outbound access and source addresses cannot be allowlisted. Watch NAT SNAT port utilization and failed outbound connections.
B:
“Monitor denied flows and effective security rule changes” concerns An NSG deny may be taking precedence over an allow, not the actual network issue: VM egress uses default outbound access and source addresses cannot be allowlisted. Watch NAT SNAT port utilization and failed outbound connections.
D:
“Monitor alias record health and the target resource lifecycle” concerns A conventional CNAME cannot be used at the zone apex, not the actual network issue: VM egress uses default outbound access and source addresses cannot be allowlisted. Watch NAT SNAT port utilization and failed outbound connections.
Question 180
At Silverline Commerce, two remote VNets must connect through Azure VPN gateways because peering is not approved. The networking change intended to correct this problem has been applied: The proposal relies only on creating VPN gateways without connecting them. Which validation is the strongest evidence that the stated requirement is now satisfied?
- Verify Azure routes traffic to the newly added branch subnet
- Measure the intended private VM flow path and throughput with FastPath enabled
- Verify a remote VPN client obtains hub connectivity to authorized spokes
- Test a private VM flow across the encrypted VNet-to-VNet tunnel
Explanation
Correct Answer
D:
Test a private VM flow across the encrypted VNet-to-VNet tunnel. Deploying both VPN gateways does not itself create the encrypted VNet-to-VNet tunnel. Explicit compatible connection resources and shared settings are required.
Incorrect Answers
A:
“Verify Azure routes traffic to the newly added branch subnet” concerns The Azure local network gateway object omits a newly added on-premises prefix, not the actual network issue: The proposal relies only on creating VPN gateways without connecting them. Test a private VM flow across the encrypted VNet-to-VNet tunnel. Deploying both VPN gateways does not itself create the encrypted VNet-to-VNet tunnel. Explicit compatible connection resources and shared settings are required.
B:
“Measure the intended private VM flow path and throughput with FastPath enabled” concerns The proposed gateway-only data path adds a throughput constraint, not the actual network issue: The proposal relies only on creating VPN gateways without connecting them. Test a private VM flow across the encrypted VNet-to-VNet tunnel. Deploying both VPN gateways does not itself create the encrypted VNet-to-VNet tunnel. Explicit compatible connection resources and shared settings are required.
C:
“Verify a remote VPN client obtains hub connectivity to authorized spokes” concerns The virtual hub does not yet contain a user VPN gateway, not the actual network issue: The proposal relies only on creating VPN gateways without connecting them. Test a private VM flow across the encrypted VNet-to-VNet tunnel. Deploying both VPN gateways does not itself create the encrypted VNet-to-VNet tunnel. Explicit compatible connection resources and shared settings are required.