cert
cert-1
cert-2

Pass Juniper JN0-664 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
JN0-664 Exam - Verified By Experts
JN0-664 Premium File

JN0-664 Premium File

$69.99
$76.99
  • Premium File 96 Questions & Answers. Last Update: Nov 19, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 20 downloads in the last 7 days
block-screenshots
Juniper JN0-664 Practice Test 27

Question 260

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. A transport upgrade changes link speed but the static scheduler allocation no longer reflects the operator's service-level commitments. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Give an unlimited strict-priority class most of the link and guarantee all other queues will receive their intended bandwidth during sustained overload.
  2. Configure an ingress policer to discard every packet above a tiny burst threshold and claim it is equivalent to lossless queuing under egress shaping.
  3. Treat packet-loss priority as a guarantee that all high-priority traffic cannot be dropped even when the physical interface is fully oversubscribed.
  4. Declare that a Type 2 external metric always equals the sum of backbone hop costs and must be changed whenever an IGP link cost changes.

Explanation

Correct Answer

A:

The directly relevant unsafe assumption is: Give an unlimited strict-priority class most of the link and guarantee all other queues will receive their intended bandwidth during sustained overload. That conflicts with the edge-to-cloud principle: Junos schedulers assign queue service treatment, but weights, strict priority and buffer settings must be balanced against starvation and hardware limitations. Apply instead: Configure a scheduler map for the intended egress forwarding classes and verify bandwidth, buffer and priority behavior during real congestion.

Incorrect Answers

B:

This alternative proposes: Configure an ingress policer to discard every packet above a tiny burst threshold and claim it is equivalent to lossless queuing under egress shaping. It concerns a different Junos engineering issue CoS policers traffic-shaping and committed-rate contracts, not the directly tested provider-network issue CoS schedulers scheduler-maps and bandwidth sharing.

C:

This alternative proposes: Treat packet-loss priority as a guarantee that all high-priority traffic cannot be dropped even when the physical interface is fully oversubscribed. It concerns a different Junos engineering issue CoS forwarding classes packet-loss priority and egress queue binding, not the directly tested provider-network issue CoS schedulers scheduler-maps and bandwidth sharing.

D:

This alternative proposes: Declare that a Type 2 external metric always equals the sum of backbone hop costs and must be changed whenever an IGP link cost changes. It concerns a different Junos engineering issue OSPF external type E1 E2 route cost evaluation, not the directly tested provider-network issue CoS schedulers scheduler-maps and bandwidth sharing.

Question 261

A Junos service-provider routing engineer investigates the following routing and service incident: A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Implement intended full-mesh or hub-and-spoke VPN reachability with precise route-target and policy behavior, including explicitly approved Internet access.
  2. Configure a scheduler map for the intended egress forwarding classes and verify bandwidth, buffer and priority behavior during real congestion.
  3. Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.
  4. Map traffic into the intended forwarding classes and packet-loss priority settings before assigning egress queue resources.

Explanation

Correct Answer

C:

A policer can discard or remark excess traffic according to a configured rate and burst; shaping usually buffers and schedules departure under a bandwidth constraint, with different latency effects. Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.

Incorrect Answers

A:

This alternative proposes: Implement intended full-mesh or hub-and-spoke VPN reachability with precise route-target and policy behavior, including explicitly approved Internet access. It concerns a different Junos engineering issue Layer 3 VPN hub spoke topology and controlled Internet breakout, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

B:

This alternative proposes: Configure a scheduler map for the intended egress forwarding classes and verify bandwidth, buffer and priority behavior during real congestion. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

D:

This alternative proposes: Map traffic into the intended forwarding classes and packet-loss priority settings before assigning egress queue resources. It concerns a different Junos engineering issue CoS forwarding classes packet-loss priority and egress queue binding, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 262

A provider routing design review considers this situation. A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission. A colleague proposes: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact. Which technical principle BEST supports that action? Select ONE best answer.

  1. Forwarding class selects an appropriate queue and packet-loss priority influences treatment such as drop precedence, but priority marking cannot create unavailable physical bandwidth.
  2. Junos schedulers assign queue service treatment, but weights, strict priority and buffer settings must be balanced against starvation and hardware limitations.
  3. A policer can discard or remark excess traffic according to a configured rate and burst; shaping usually buffers and schedules departure under a bandwidth constraint, with different latency effects.
  4. ABRs can advertise summary information between areas while routing policy and area ranges alter which routes are visible; overly broad aggregation can blackhole traffic if specifics lack coverage.

Explanation

Correct Answer

C:

The relevant Junos service-provider networking principle is: A policer can discard or remark excess traffic according to a configured rate and burst; shaping usually buffers and schedules departure under a bandwidth constraint, with different latency effects. In the described provider-network case (A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission.), it supports the planned action: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.

Incorrect Answers

A:

This alternative proposes: Forwarding class selects an appropriate queue and packet-loss priority influences treatment such as drop precedence, but priority marking cannot create unavailable physical bandwidth. It concerns a different Junos engineering issue CoS forwarding classes packet-loss priority and egress queue binding, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

B:

This alternative proposes: Junos schedulers assign queue service treatment, but weights, strict priority and buffer settings must be balanced against starvation and hardware limitations. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

D:

This alternative proposes: ABRs can advertise summary information between areas while routing policy and area ranges alter which routes are visible; overly broad aggregation can blackhole traffic if specifics lack coverage. It concerns a different Junos engineering issue OSPF interarea route summarization and route restrictions, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 263

A Juniper service-provider engineer needs decisive verification evidence for this situation. A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Inspect VPN route label, resolved tunnel in inet.3, label-switched path, control-plane next hop, penultimate-hop behavior and egress VRF lookup.
  2. Inspect DSCP or EXP bits, classifier mapping, interface ingress association, show class-of-service interface and relevant forwarding-class counters.
  3. Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.
  4. Examine scheduler-map bindings, allocated rates, interface queue statistics, high-priority activity and low-priority drain rate under load.

Explanation

Correct Answer

C:

The direct discriminating observation is: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic. In the stated situation (A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission.), the intended acceptance outcome is: The customer contract rate is enforced with predictable handling of permitted bursts and no unintended control-plane traffic drops.

Incorrect Answers

A:

This alternative proposes: Inspect VPN route label, resolved tunnel in inet.3, label-switched path, control-plane next hop, penultimate-hop behavior and egress VRF lookup. It concerns a different Junos engineering issue MPLS VPN transport label stack and next hop, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

B:

This alternative proposes: Inspect DSCP or EXP bits, classifier mapping, interface ingress association, show class-of-service interface and relevant forwarding-class counters. It concerns a different Junos engineering issue Junos CoS behavior aggregate versus multifield classifiers, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

D:

This alternative proposes: Examine scheduler-map bindings, allocated rates, interface queue statistics, high-priority activity and low-priority drain rate under load. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 264

A service-provider acceptance team reviews the result of a provider-service change. A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission. The intended verification is: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic. Which outcome BEST demonstrates success? Select ONE best answer.

  1. Congestion handling protects critical traffic without uncontrolled buffer delay, and packets leave with markings the next domain can interpret.
  2. The customer contract rate is enforced with predictable handling of permitted bursts and no unintended control-plane traffic drops.
  3. Multicast subscribers continue receiving approved sources when one RP fails, with no duplicate or missing source registration state.
  4. Latency-sensitive traffic uses the correct supported queue while lower-priority flows experience controlled loss under congestion.

Explanation

Correct Answer

B:

The verified success outcome is: The customer contract rate is enforced with predictable handling of permitted bursts and no unintended control-plane traffic drops. Confirm this by: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.

Incorrect Answers

A:

This alternative proposes: Congestion handling protects critical traffic without uncontrolled buffer delay, and packets leave with markings the next domain can interpret. It concerns a different Junos engineering issue CoS RED drop profiles and rewrite-marking validation, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

C:

That option concerns Anycast RP resilient multicast service and routing policy. The related controlled intervention is: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.

D:

This alternative proposes: Latency-sensitive traffic uses the correct supported queue while lower-priority flows experience controlled loss under congestion. It concerns a different Junos engineering issue CoS forwarding classes packet-loss priority and egress queue binding, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 265

A Junos service-provider routing engineer investigates this service-provider network scenario. A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission. Which TWO complementary steps combine a suitable technical action and its direct verification? Select TWO answers.

  1. Inspect DSCP or EXP bits, classifier mapping, interface ingress association, show class-of-service interface and relevant forwarding-class counters.
  2. Diagnose unknown unicast flooding and Layer 2 loops by distinguishing learned customer MAC paths, BUM handling and VPLS split-horizon behavior.
  3. Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.
  4. Configure and verify source-specific multicast using a sender-and-group channel while ensuring receiver signaling and source reachability support it.
  5. Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.

Explanation

Correct Answers

C:

The direct discriminating observation is: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.

E:

The case-specific routing and services action is: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact. The governing Junos routing/service principle is: A policer can discard or remark excess traffic according to a configured rate and burst; shaping usually buffers and schedules departure under a bandwidth constraint, with different latency effects.

Incorrect Answers

A:

This alternative proposes: Inspect DSCP or EXP bits, classifier mapping, interface ingress association, show class-of-service interface and relevant forwarding-class counters. It concerns a different Junos engineering issue Junos CoS behavior aggregate versus multifield classifiers, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts in the stated situation (A 100-Mb/s subscriber sends 200-Mb/s short bursts and the carrier wants to distinguish policer drops from a shaper's queued transmission.). A better case-specific check is: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.

B:

This alternative proposes: Diagnose unknown unicast flooding and Layer 2 loops by distinguishing learned customer MAC paths, BUM handling and VPLS split-horizon behavior. It concerns a different Junos engineering issue VPLS MAC learning flooding and split-horizon safeguards, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

D:

This alternative proposes: Configure and verify source-specific multicast using a sender-and-group channel while ensuring receiver signaling and source reachability support it. It concerns a different Junos engineering issue Source-specific multicast and IGMPv3 source filtering, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 266

A Junos service-provider routing engineer investigates the following routing and service incident: A service is billed at a committed data rate, but a technician mistakes an interface's port speed for its active configured policing profile. What is the MOST appropriate FIRST action based on the facts given? Select ONE best answer.

  1. Classify subscriber traffic with an appropriate behavior-aggregate or multifield classifier and confirm forwarding-class assignments at ingress.
  2. Check whether the deployed IS-IS metric style and link costs support the provider's intended routing and traffic-engineering behavior.
  3. Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.
  4. Configure a scheduler map for the intended egress forwarding classes and verify bandwidth, buffer and priority behavior during real congestion.

Explanation

Correct Answer

C:

The case-specific routing and services action is: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact. The governing Junos routing/service principle is: A policer can discard or remark excess traffic according to a configured rate and burst; shaping usually buffers and schedules departure under a bandwidth constraint, with different latency effects. Verify the decision through: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.

Incorrect Answers

A:

This alternative proposes: Classify subscriber traffic with an appropriate behavior-aggregate or multifield classifier and confirm forwarding-class assignments at ingress. It concerns a different Junos engineering issue Junos CoS behavior aggregate versus multifield classifiers, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

B:

This alternative proposes: Check whether the deployed IS-IS metric style and link costs support the provider's intended routing and traffic-engineering behavior. It concerns a different Junos engineering issue IS-IS wide metrics traffic engineering and cost selection, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

D:

This alternative proposes: Configure a scheduler map for the intended egress forwarding classes and verify bandwidth, buffer and priority behavior during real congestion. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 267

A provider routing design review considers this situation. A service is billed at a committed data rate, but a technician mistakes an interface's port speed for its active configured policing profile. A colleague proposes: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact. Which technical principle BEST supports that action? Select ONE best answer.

  1. Behavior-aggregate classification examines existing packet markings whereas multifield classification can evaluate packet header fields; a configured classifier must be applied to the correct interface.
  2. Junos schedulers assign queue service treatment, but weights, strict priority and buffer settings must be balanced against starvation and hardware limitations.
  3. A policer can discard or remark excess traffic according to a configured rate and burst; shaping usually buffers and schedules departure under a bandwidth constraint, with different latency effects.
  4. An LDP-signaled pseudowire uses locally and remotely agreed circuit identifiers, transport paths and VC labels; mismatched endpoints or identifiers can prevent service Up state.

Explanation

Correct Answer

C:

The relevant Junos service-provider networking principle is: A policer can discard or remark excess traffic according to a configured rate and burst; shaping usually buffers and schedules departure under a bandwidth constraint, with different latency effects. In the described provider-network case (A service is billed at a committed data rate, but a technician mistakes an interface's port speed for its active configured policing profile.), it supports the planned action: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.

Incorrect Answers

A:

This alternative proposes: Behavior-aggregate classification examines existing packet markings whereas multifield classification can evaluate packet header fields; a configured classifier must be applied to the correct interface. It concerns a different Junos engineering issue Junos CoS behavior aggregate versus multifield classifiers, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

B:

This alternative proposes: Junos schedulers assign queue service treatment, but weights, strict priority and buffer settings must be balanced against starvation and hardware limitations. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

D:

This alternative proposes: An LDP-signaled pseudowire uses locally and remotely agreed circuit identifiers, transport paths and VC labels; mismatched endpoints or identifiers can prevent service Up state. It concerns a different Junos engineering issue LDP signaled Layer 2 circuit pseudowire status and VC identifiers, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 268

A Juniper service-provider engineer needs decisive verification evidence for this situation. A service is billed at a committed data rate, but a technician mistakes an interface's port speed for its active configured policing profile. Which observation MOST DIRECTLY distinguishes the relevant issue? Select ONE best answer.

  1. Examine scheduler-map bindings, allocated rates, interface queue statistics, high-priority activity and low-priority drain rate under load.
  2. Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic.
  3. Review route-policy terms, L1 and L2 route databases, leaked prefix entries, interface scope and next-hop resolution from affected access devices.
  4. Check egress queue occupancy, WRED/drop-profile thresholds, packet-loss-priority settings, rewrite maps and observed DSCP or MPLS EXP values.

Explanation

Correct Answer

B:

The direct discriminating observation is: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic. In the stated situation (A service is billed at a committed data rate, but a technician mistakes an interface's port speed for its active configured policing profile.), the intended acceptance outcome is: The customer contract rate is enforced with predictable handling of permitted bursts and no unintended control-plane traffic drops.

Incorrect Answers

A:

This alternative proposes: Examine scheduler-map bindings, allocated rates, interface queue statistics, high-priority activity and low-priority drain rate under load. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

C:

This alternative proposes: Review route-policy terms, L1 and L2 route databases, leaked prefix entries, interface scope and next-hop resolution from affected access devices. It concerns a different Junos engineering issue IS-IS Level 2 to Level 1 route leaking and summaries, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

D:

This alternative proposes: Check egress queue occupancy, WRED/drop-profile thresholds, packet-loss-priority settings, rewrite maps and observed DSCP or MPLS EXP values. It concerns a different Junos engineering issue CoS RED drop profiles and rewrite-marking validation, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 269

A service-provider acceptance team reviews the result of a provider-service change. A service is billed at a committed data rate, but a technician mistakes an interface's port speed for its active configured policing profile. The intended verification is: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic. Which outcome BEST demonstrates success? Select ONE best answer.

  1. The customer contract rate is enforced with predictable handling of permitted bursts and no unintended control-plane traffic drops.
  2. Congestion handling protects critical traffic without uncontrolled buffer delay, and packets leave with markings the next domain can interpret.
  3. The intended family appears on both ends with the right permitted prefixes and labels, while unrelated BGP families remain unchanged.
  4. Latency-sensitive traffic uses the correct supported queue while lower-priority flows experience controlled loss under congestion.

Explanation

Correct Answer

A:

The verified success outcome is: The customer contract rate is enforced with predictable handling of permitted bursts and no unintended control-plane traffic drops. Confirm this by: Inspect input and output policing bindings, configured CIR and burst allowance, drop counters, queue depth and throughput of representative traffic. The related controlled intervention is: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.

Incorrect Answers

B:

This alternative proposes: Congestion handling protects critical traffic without uncontrolled buffer delay, and packets leave with markings the next domain can interpret. It concerns a different Junos engineering issue CoS RED drop profiles and rewrite-marking validation, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

C:

That option concerns Multiprotocol BGP family negotiations and VPN routes. The related controlled intervention is: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.

D:

This alternative proposes: Latency-sensitive traffic uses the correct supported queue while lower-priority flows experience controlled loss under congestion. It concerns a different Junos engineering issue CoS forwarding classes packet-loss priority and egress queue binding, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Question 270

A Junos routing design reviewer evaluates an unsafe shortcut in this network customer scenario. A service is billed at a committed data rate, but a technician mistakes an interface's port speed for its active configured policing profile. Which assumption is MOST DIRECTLY dangerous or unsupported? Select ONE best answer.

  1. Give an unlimited strict-priority class most of the link and guarantee all other queues will receive their intended bandwidth during sustained overload.
  2. Treat packet-loss priority as a guarantee that all high-priority traffic cannot be dropped even when the physical interface is fully oversubscribed.
  3. Assume every BGP peer that sends the same prefix creates a data-plane ECMP entry even when their route attributes and policies differ.
  4. Configure an ingress policer to discard every packet above a tiny burst threshold and claim it is equivalent to lossless queuing under egress shaping.

Explanation

Correct Answer

D:

Apply instead: Distinguish ingress policing from egress shaping and apply a documented committed-rate or burst policy with measured customer impact.

Incorrect Answers

A:

This alternative proposes: Give an unlimited strict-priority class most of the link and guarantee all other queues will receive their intended bandwidth during sustained overload. It concerns a different Junos engineering issue CoS schedulers scheduler-maps and bandwidth sharing, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

B:

This alternative proposes: Treat packet-loss priority as a guarantee that all high-priority traffic cannot be dropped even when the physical interface is fully oversubscribed. It concerns a different Junos engineering issue CoS forwarding classes packet-loss priority and egress queue binding, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

C:

This alternative proposes: Assume every BGP peer that sends the same prefix creates a data-plane ECMP entry even when their route attributes and policies differ. It concerns a different Junos engineering issue BGP multipath equal cost and per-flow forwarding, not the directly tested provider-network issue CoS policers traffic-shaping and committed-rate contracts.

Service Provider Routing and Switching, Professional (JNCIP-SP) (JN0-664) Practice Tests