Juniper JN0-452 Practice Test 77
Question 760
Which observed outcome provides the strongest verification for this requirement? A junior analyst confuses proactive Marvis Actions with user-triggered Marvis queries and expects the same trigger and evaluation logic. Select the ONE best answer.
- A known recurring condition produces appropriate action evidence, and a targeted question returns linked session details.
- Planned Mini tests pass DHCP and DNS requirements and representative actual client sessions confirm service readiness.
- Morning arrival tests show timely address assignment and the historic Action no longer recurs.
- The approved feature applies to eligible radios and postchange measurements show the intended repair.
Explanation
Correct Answer
A:Proactive findings can be surfaced without a new user question while reactive queries investigate a requested scope. It validates the controlled change: Distinguish evidence-led proactive detection from reactive natural-language investigation and select the right workflow for each.
Incorrect Answers
B:Synthetic probes can expose service-stage faults in a quiet network but do not guarantee all future device experiences. This is a different acceptance outcome; the required result here is: A known recurring condition produces appropriate action evidence, and a targeted question returns linked session details.
C:Time-bounded and cyclical service defects can be obscured when AI evidence is reviewed outside the relevant interval. This is a different acceptance outcome; the required result here is: A known recurring condition produces appropriate action evidence, and a targeted question returns linked session details.
D:Cloud assistant guidance must be interpreted within the supported capabilities of actual deployed hardware and software. This is a different acceptance outcome; the required result here is: A known recurring condition produces appropriate action evidence, and a targeted question returns linked session details.
Question 761
After the authorized change, which measurable result most directly demonstrates success? An AP has high available radio capacity but client traffic remains slow because the switch uplink is repeatedly renegotiating. Select the ONE best answer.
- The physical link stabilizes and wireless clients achieve expected goodput without changes to SSID security.
- Fresh test clients receive correct leases on time while established users remain uninterrupted.
- A limited RRM adjustment reduces busy-airtime collision and improves throughput for affected clients without neighbor degradation.
- An approved test endpoint completes EAP and reaches its service with restored authentication SLE.
Explanation
Correct Answer
A:A WLAN user service path can be constrained by a faulty wired dependency even with healthy RF capacity. It validates the controlled change: Correlate wired uplink errors and link speed with Wireless Assurance throughput instead of treating radio-only metrics as sufficient.
Incorrect Answers
B:The alternative observation is: Fresh test clients receive correct leases on time while established users remain uninterrupted. The acceptance test for this case is: The physical link stabilizes and wireless clients achieve expected goodput without changes to SSID security.
C:More power may enlarge contention cells and worsen co-channel reuse rather than increasing available spectrum. This is a different acceptance outcome; the required result here is: The physical link stabilizes and wireless clients achieve expected goodput without changes to SSID security.
D:The alternative observation is: An approved test endpoint completes EAP and reaches its service with restored authentication SLE. The acceptance test for this case is: The physical link stabilizes and wireless clients achieve expected goodput without changes to SSID security.
Question 762
An architect must identify the primary underlying platform behavior. Which explanation is correct? A Marvis Action indicates an AP has insufficient PoE power, but the wireless team keeps changing security ciphers in response. Select the ONE best answer.
- Cross-site correlated symptoms may share identity, WAN or cloud dependencies rather than an isolated failing AP.
- Physical power limitations can disable radio features even when client authentication settings are correct.
- Roaming diagnostics need a complete observation of transition endpoints; partial inventory scope can hide the actual handoff.
- Cloud assistant guidance must be interpreted within the supported capabilities of actual deployed hardware and software.
Explanation
Correct Answer
B:The corresponding supported intervention is: Trace the recommended device-power finding to switch PoE logs and AP negotiated operating mode before changing WLAN policy.
Incorrect Answers
A:The alternative governing principle is: Cross-site correlated symptoms may share identity, WAN or cloud dependencies rather than an isolated failing AP. The mechanism tested by the reported case is: Physical power limitations can disable radio features even when client authentication settings are correct.
C:The alternative governing principle is: Roaming diagnostics need a complete observation of transition endpoints; partial inventory scope can hide the actual handoff. The mechanism tested by the reported case is: Physical power limitations can disable radio features even when client authentication settings are correct.
D:The alternative governing principle is: Cloud assistant guidance must be interpreted within the supported capabilities of actual deployed hardware and software. The mechanism tested by the reported case is: Physical power limitations can disable radio features even when client authentication settings are correct.
Question 763
Select TWO appropriate investigation, change, and acceptance elements for this situation. A mall installs dense BLE receivers but reports poor location near glass storefronts where reflected signals dominate measurements.
- Add more random beacons without measuring which reflected paths are causing the error.
- Survey affected storefront geometry and refine receiver placement or supported calibration based on measured multipath effects.
- Compare glass geometry, RSSI scatter, surveyed route positions, receiver placements and location confidence.
- Update supported site and inventory association and validate receiving-site observations and authorized visibility.
- Compare event IDs, packet intervals, known stationary tests, zone boundaries and movement analytics.
Explanation
Correct Answer
B:Acceptance criterion: Documented test routes show improved location classification and false-zone crossings decrease near the storefront. Dense receiver count alone cannot remove errors caused by reflections and radio propagation characteristics.
C:Survey affected storefront geometry and refine receiver placement or supported calibration based on measured multipath effects. Dense receiver count alone cannot remove errors caused by reflections and radio propagation characteristics.
Incorrect Answers
A:Add more random beacons without measuring which reflected paths are causing the error. This shortcut skips or undermines the needed control. Dense receiver count alone cannot remove errors caused by reflections and radio propagation characteristics. The required remediation is: Survey affected storefront geometry and refine receiver placement or supported calibration based on measured multipath effects.
D:That option would update supported site and inventory association and validate receiving-site observations and authorized visibility, but it addresses a different concern. Dense receiver count alone cannot remove errors caused by reflections and radio propagation characteristics.
E:This check investigates a different symptom (A factory tracking report counts rapid repeated location observations as distinct asset movements and vastly overstates utilization.). For this incident, the targeted check is: Compare glass geometry, RSSI scatter, surveyed route positions, receiver placements and location confidence.
Question 764
Which specific remediation is the best controlled next step? A property owner turns on sitewide proximity tracing without verifying whether its stated retention policy applies to raw radio events and derived contacts. Select the ONE best answer.
- Use supported distance and time evidence with clearly stated uncertainty and corroboration before drawing a proximity conclusion.
- Calibrate floorplan scale against surveyed reference distances and verify location zone boundaries using repeated walk tests.
- Define consistent approved engagement measurement units and deduplicate client sessions before evaluating results.
- Apply a documented lifecycle policy to both source observations and derived proximity results, with audit and access controls.
Explanation
Correct Answer
D:Derived contact records can remain sensitive after raw beacons have expired and must be governed separately. Before making it, verify: Inspect source event store, contact analysis tables, retention jobs, role grants and deletion evidence.
Incorrect Answers
A:That option would use supported distance and time evidence with clearly stated uncertainty and corroboration before drawing a proximity conclusion, but it addresses a different concern. Derived contact records can remain sensitive after raw beacons have expired and must be governed separately.
B:Calibrate floorplan scale against surveyed reference distances and verify location zone boundaries using repeated walk tests. Here the decisive dependency is: Derived contact records can remain sensitive after raw beacons have expired and must be governed separately. Use the specified intervention: Apply a documented lifecycle policy to both source observations and derived proximity results, with audit and access controls.
C:That option would define consistent approved engagement measurement units and deduplicate client sessions before evaluating results, but it addresses a different concern. Derived contact records can remain sensitive after raw beacons have expired and must be governed separately.
Question 765
Which cause-and-effect relationship is most relevant to the described operational risk? A remote office loses many voice frames when another client starts large file transfers using identical wireless access priorities. Select the ONE best answer.
- Partially overlapping channels cause interference that a strong RSSI reading cannot distinguish from a clean RF environment.
- The negotiated PHY rate excludes MAC headers, acknowledgments, contention and protocol overhead from application throughput.
- Client 6 GHz participation and supported authentication modes are prerequisites before IP address assignment can begin.
- EDCA access categories bias contention opportunities, but incorrect classification can leave delay-sensitive voice behind bulk traffic.
Explanation
Correct Answer
D:The corresponding supported intervention is: Validate applicable WMM access categories and voice QoS markings across WLAN and switching without granting unrestricted priority.
Incorrect Answers
A:The alternative governing principle is: Partially overlapping channels cause interference that a strong RSSI reading cannot distinguish from a clean RF environment. The mechanism tested by the reported case is: EDCA access categories bias contention opportunities, but incorrect classification can leave delay-sensitive voice behind bulk traffic.
B:The alternative governing principle is: The negotiated PHY rate excludes MAC headers, acknowledgments, contention and protocol overhead from application throughput. The mechanism tested by the reported case is: EDCA access categories bias contention opportunities, but incorrect classification can leave delay-sensitive voice behind bulk traffic.
C:The alternative governing principle is: Client 6 GHz participation and supported authentication modes are prerequisites before IP address assignment can begin. The mechanism tested by the reported case is: EDCA access categories bias contention opportunities, but incorrect classification can leave delay-sensitive voice behind bulk traffic.
Question 766
Which action directly resolves the core infrastructure requirement without relying on an unrelated workaround? A multi-AP deployment disables protected management frame support because an older test handset complains during WPA3 onboarding. Select the ONE best answer.
- Inspect the negotiated security suite and EAPOL key exchange instead of changing RF channels as the first remedy.
- Interpret the advertised beacon interval using 802.11 time units and measure actual frame timing rather than guessing milliseconds.
- Decode MAC frame types and sequence numbers before interpreting ACK and Block ACK behavior as a data problem.
- Identify legacy handset compatibility and provide a controlled supported access alternative while retaining required WPA3 protections.
Explanation
Correct Answer
D:WPA3 security negotiation includes management-frame protection obligations that cannot simply be removed from the protected WLAN. This is the targeted change for the reported environment.
Incorrect Answers
A:That option would inspect the negotiated security suite and EAPOL key exchange instead of changing RF channels as the first remedy, but it addresses a different concern. WPA3 security negotiation includes management-frame protection obligations that cannot simply be removed from the protected WLAN.
B:Interpret the advertised beacon interval using 802.11 time units and measure actual frame timing rather than guessing milliseconds. Here the decisive dependency is: WPA3 security negotiation includes management-frame protection obligations that cannot simply be removed from the protected WLAN. Use the specified intervention: Identify legacy handset compatibility and provide a controlled supported access alternative while retaining required WPA3 protections.
C:Decode MAC frame types and sequence numbers before interpreting ACK and Block ACK behavior as a data problem. Here the decisive dependency is: WPA3 security negotiation includes management-frame protection obligations that cannot simply be removed from the protected WLAN. Use the specified intervention: Identify legacy handset compatibility and provide a controlled supported access alternative while retaining required WPA3 protections.
Question 767
A change engineer must select a justified corrective intervention. Which should be approved? An incident report says a new Wi-Fi 6 laptop had slow throughput but the AP and client actually negotiated a low MCS throughout the test. Select the ONE best answer.
- Normalize capture and event times to verified sources and record any clock offsets before cross-device causality analysis.
- Apply capture scoping, role-restricted access and retention controls and share only relevant diagnostic frames.
- Compare per-client MCS, retry and SNR trends to identify rate adaptation causes before changing applications or bandwidth contracts.
- Filter by affected classroom, client type and busiest teaching hours and measure application-relevant connectivity stages.
Explanation
Correct Answer
C:A high supported PHY standard does not guarantee high current modulation under poor link reliability. This is the targeted change for the reported environment.
Incorrect Answers
A:Normalize capture and event times to verified sources and record any clock offsets before cross-device causality analysis. Here the decisive dependency is: A high supported PHY standard does not guarantee high current modulation under poor link reliability. Use the specified intervention: Compare per-client MCS, retry and SNR trends to identify rate adaptation causes before changing applications or bandwidth contracts.
B:That option would apply capture scoping, role-restricted access and retention controls and share only relevant diagnostic frames, but it addresses a different concern. A high supported PHY standard does not guarantee high current modulation under poor link reliability.
D:Filter by affected classroom, client type and busiest teaching hours and measure application-relevant connectivity stages. Here the decisive dependency is: A high supported PHY standard does not guarantee high current modulation under poor link reliability. Use the specified intervention: Compare per-client MCS, retry and SNR trends to identify rate adaptation causes before changing applications or bandwidth contracts.
Question 768
Which end-to-end operational sequence best controls risk from detection through acceptance? An instructor claims that multiple PSK identities automatically create separate SSIDs for every classroom. Select the ONE best answer.
- Investigate: Inspect RSN mode, EAPOL messages, RADIUS decisions, portal rules and resulting client VLANs. Remediate: Document and configure the intended authentication flow and separate enterprise access from guest admission where required. Verify: Employees authenticate with approved EAP identities and guests receive only the separately intended portal-limited access.
- Investigate: Inspect beaconed SSID inventory, PSK policy configuration, client join results and effective role mappings. Remediate: Review the supported multi-PSK WLAN design and distinguish one advertised SSID from per-secret policy assignment. Verify: Two credential classes join the same intended SSID and receive the separately authorized policies.
- Investigate: Scan all BSSIDs and RSN settings, compare active WLAN objects, client associations and site template inheritance. Remediate: Identify and retire the unintended legacy WLAN object while validating guest migration and the actual security suites on air. Verify: Clients discover the approved protected guest service and no unauthorized legacy open BSSID remains in scope.
- Investigate: Test pre-auth ARP, gateway and DNS reachability, portal transition and effective WxLAN policies. Remediate: Apply explicit pre-authentication isolation and allow only necessary onboarding resources before verified user authorization. Verify: Before sign-in the test client reaches only required onboarding services, and after sign-in receives limited role access.
Explanation
Correct Answer
B:Multiple accepted keys can provide differentiated access within a single WLAN without requiring a unique beacon SSID per credential. Inspect beaconed SSID inventory, PSK policy configuration, client join results and effective role mappings.
Incorrect Answers
A:Inspect RSN mode, EAPOL messages, RADIUS decisions, portal rules and resulting client VLANs. Remediate: Document and configure the intended authentication flow and separate enterprise access from guest admission where required. Verify: Employees authenticate with approved EAP identities and guests receive only the separately intended portal-limited access. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Review the supported multi-PSK WLAN design and distinguish one advertised SSID from per-secret policy assignment.
C:Scan all BSSIDs and RSN settings, compare active WLAN objects, client associations and site template inheritance. Remediate: Identify and retire the unintended legacy WLAN object while validating guest migration and the actual security suites on air. Verify: Clients discover the approved protected guest service and no unauthorized legacy open BSSID remains in scope. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Review the supported multi-PSK WLAN design and distinguish one advertised SSID from per-secret policy assignment.
D:Test pre-auth ARP, gateway and DNS reachability, portal transition and effective WxLAN policies. Remediate: Apply explicit pre-authentication isolation and allow only necessary onboarding resources before verified user authorization. Verify: Before sign-in the test client reaches only required onboarding services, and after sign-in receives limited role access. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Review the supported multi-PSK WLAN design and distinguish one advertised SSID from per-secret policy assignment.
Question 769
Which evidence-gathering check most directly narrows the cause of this incident? A branch AP has strong Wi-Fi RSSI but voice calls fail because retries rise with high channel utilization during a conference. Select the ONE best answer.
- Review alert subscription, site scope, recipient rules, mail rejection and test event timestamps.
- Inspect capacity classification, airtime contention, retry events, AP client count and noisy-neighbor channels.
- Inspect source/destination BSSID, roam times, client device types, RF overlap and failed transition events.
- Review planned optimization times, active clients, RF change events, business calendar and before-after SLEs.
Explanation
Correct Answer
B:Strong coverage cannot create additional airtime when many stations contend for one busy RF channel. Analyze capacity SLE, channel busy measurements and radio contention, then adjust channel reuse or coverage under a controlled plan. This check separates the suspected dependency before a risky change.
Incorrect Answers
A:Logging a Mist event and successfully delivering a notification through an external channel are separate conditions. The focused check for the reported condition is: Inspect capacity classification, airtime contention, retry events, AP client count and noisy-neighbor channels.
C:Roaming is a series of measured handoffs; aggregate performance does not locate the specific failing transition. The focused check for the reported condition is: Inspect capacity classification, airtime contention, retry events, AP client count and noisy-neighbor channels.
D:An otherwise valid radio optimization can be operationally harmful if it interrupts sensitive client sessions. The focused check for the reported condition is: Inspect capacity classification, airtime contention, retry events, AP client count and noisy-neighbor channels.
Question 770
Which observed outcome provides the strongest verification for this requirement? A remote guest site uses Enhanced Open and the operator assumes anonymous link encryption also authenticates the visitor's personal identity. Select the ONE best answer.
- The neighbor AP is not blocked incorrectly and the true unauthorized wired-connected test AP is identified.
- Two credential classes join the same intended SSID and receive the separately authorized policies.
- Clients discover the approved protected guest service and no unauthorized legacy open BSSID remains in scope.
- Passive radio inspection lacks exposed plaintext for an eligible client while identity-restricted services still require login.
Explanation
Correct Answer
D:Opportunistic Wireless Encryption can protect radio data for unauthenticated users but does not authenticate a unique person. It validates the controlled change: Separate opportunistic link encryption from user authentication and apply additional controlled identity verification if needed.
Incorrect Answers
A:SSID similarity and radio proximity alone cannot establish that an AP is connected illicitly to the protected wired network. This is a different acceptance outcome; the required result here is: Passive radio inspection lacks exposed plaintext for an eligible client while identity-restricted services still require login.
B:Multiple accepted keys can provide differentiated access within a single WLAN without requiring a unique beacon SSID per credential. This is a different acceptance outcome; the required result here is: Passive radio inspection lacks exposed plaintext for an eligible client while identity-restricted services still require login.
C:Duplicate branded SSIDs with different protection can confuse client selection and increase downgrade or impersonation risk. This is a different acceptance outcome; the required result here is: Passive radio inspection lacks exposed plaintext for an eligible client while identity-restricted services still require login.