Juniper JN0-452 Practice Test 72
Question 710
Which acceptance evidence would show that the original fault or risk was actually remediated? A university uses an organization-wide SLE dashboard to claim every classroom has acceptable video conferencing quality. Select the ONE best answer.
- Clients successfully authenticate through the surviving approved RADIUS server and rejects decrease in the affected SLE.
- A fresh device gets a correct lease through the authorized path and guest isolation rules remain in effect.
- After verified client-side remediation, affected models join normally while other devices retain service performance.
- The classroom's own clients meet approved service thresholds during a representative video session.
Explanation
Correct Answer
D:Aggregating many quiet or healthy sites can hide local WLAN deficiencies that impair specific student workflows. The classroom's own clients meet approved service thresholds during a representative video session.
Incorrect Answers
A:Wireless association and RADIUS authorization are separate stages; a healthy AP cannot compensate for an unreachable identity node. This is a different acceptance outcome; the required result here is: The classroom's own clients meet approved service thresholds during a representative video session.
B:Service dependencies can be blocked by network authorization policy even when the AP's RF association still works. This is a different acceptance outcome; the required result here is: The classroom's own clients meet approved service thresholds during a representative video session.
C:The alternative observation is: After verified client-side remediation, affected models join normally while other devices retain service performance. The acceptance test for this case is: The classroom's own clients meet approved service thresholds during a representative video session.
Question 711
Which acceptance evidence would show that the original fault or risk was actually remediated? A support analyst interprets Marvis Mini synthetic identifiers as genuine employee accounts and adds them to sensitive authorization allowlists. Select the ONE best answer.
- A Mini still detects onboarding issues while production network roles reflect only authorized real principals.
- Simulated false alerts do not cause fleet-wide outages and approved remediation is independently verified.
- The Mini reports its intended service stages and an enrolled certificate-bearing test endpoint completes EAP-TLS separately.
- The approved feature applies to eligible radios and postchange measurements show the intended repair.
Explanation
Correct Answer
A:It validates the controlled change: Keep synthetic telemetry and production identity sources separate and authorize only verified real user or device records.
Incorrect Answers
B:Automated recommendations can have false positives and their operational impact must be bounded by change governance. This is a different acceptance outcome; the required result here is: A Mini still detects onboarding issues while production network roles reflect only authorized real principals.
C:A synthetic DHCP or DNS probe cannot establish success of an untested enterprise certificate or identity workflow. This is a different acceptance outcome; the required result here is: A Mini still detects onboarding issues while production network roles reflect only authorized real principals.
D:Cloud assistant guidance must be interpreted within the supported capabilities of actual deployed hardware and software. This is a different acceptance outcome; the required result here is: A Mini still detects onboarding issues while production network roles reflect only authorized real principals.
Question 712
A change engineer must select a justified corrective intervention. Which should be approved? An organization wants Marvis to automatically reset all APs when any anomaly is detected, without human verification or rollback. Select the ONE best answer.
- Correct the query observation window and validate that client activity exists before interpreting the absence of results.
- Establish risk-based approval for disruptive operations and require validated action evidence and controlled rollback.
- Compare probe geometry, source network and service destination before attributing a changed synthetic result to a radio.
- Trace the recommended action to underlying channel utilization, neighboring cells and affected radio inventory before an RF change.
Explanation
Correct Answer
B:Automated recommendations can have false positives and their operational impact must be bounded by change governance. Before making it, verify: Inspect action triggers, severity, automation privileges, change approvals and failure simulation outcomes.
Incorrect Answers
A:Correct the query observation window and validate that client activity exists before interpreting the absence of results. Here the decisive dependency is: Automated recommendations can have false positives and their operational impact must be bounded by change governance. Use the specified intervention: Establish risk-based approval for disruptive operations and require validated action evidence and controlled rollback.
C:That option would compare probe geometry, source network and service destination before attributing a changed synthetic result to a radio, but it addresses a different concern. Automated recommendations can have false positives and their operational impact must be bounded by change governance.
D:That option would trace the recommended action to underlying channel utilization, neighboring cells and affected radio inventory before an RF change, but it addresses a different concern. Automated recommendations can have false positives and their operational impact must be bounded by change governance.
Question 713
Which observed outcome provides the strongest verification for this requirement? A school WLAN lets a laptop associate but the subsequent 4-way key handshake fails after the WLAN security mode was modified. Select the ONE best answer.
- An eligible laptop completes key exchange and encrypted traffic works under the approved cipher suite.
- The adjusted cell achieves a stable higher SNR and fewer frame retries without harmful neighboring-cell overlap.
- The mobility test records shorter handoff gaps with correct continued network authorization and no unapproved fallback.
- After RF remediation, stable link quality supports a suitable MCS and packet error rate without changing addressing.
Explanation
Correct Answer
A:Association alone does not establish installed encryption keys; the handshake must complete under compatible security parameters. It validates the controlled change: Inspect the negotiated security suite and EAPOL key exchange instead of changing RF channels as the first remedy.
Incorrect Answers
B:The alternative observation is: The adjusted cell achieves a stable higher SNR and fewer frame retries without harmful neighboring-cell overlap. The acceptance test for this case is: An eligible laptop completes key exchange and encrypted traffic works under the approved cipher suite.
C:A full repeated authentication path can add handoff delay, while fast transition is beneficial only when supported and configured correctly. This is a different acceptance outcome; the required result here is: An eligible laptop completes key exchange and encrypted traffic works under the approved cipher suite.
D:Modulation and coding rates adapt to current link reliability and can fall even when the DHCP lease remains valid. This is a different acceptance outcome; the required result here is: An eligible laptop completes key exchange and encrypted traffic works under the approved cipher suite.
Question 714
Which investigation-and-change plan directly addresses the issue and proves the outcome? A hotel creates a virtual BLE engagement zone spanning both its lobby and guest rooms, causing unwanted messages before guests reach the target area. Select the ONE best answer.
- Investigate: Inspect mobile app permissions, opt-in events, beacon observations, privacy notice and message history. Remediate: Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path. Verify: Opted-in test visitors receive the intended message while those denying permission are not tracked and can browse alternatives.
- Investigate: Review zone dimensions, proximity threshold, beacon strength, floorplan coordinates and notification timestamps. Remediate: Reduce and recalibrate the supported engagement-zone geometry using reference movement paths and repeated boundary testing. Verify: Messages activate only inside the permitted target zone and not during neighboring public-space walks.
- Investigate: Inspect UTC timestamps, site timezone, daylight changes, receiver clock and event records. Remediate: Normalize source event times to a consistent reference and retain local display offset separately from recorded occurrence. Verify: The cross-period event history orders movements correctly and raw event time remains unchanged after localization.
- Investigate: Review tracing purpose, badge identifiers, role grants, consent/notice, data storage and retention policy. Remediate: Define lawful purpose, retention, access restrictions and appropriate anonymization before activating supported proximity analytics. Verify: A controlled contact-analysis report supports the approved purpose while unauthorized viewer roles cannot retrieve detailed histories.
Explanation
Correct Answer
B:A broad trigger region may fire in unintended physical areas even when all receivers and tags are operating normally. Messages activate only inside the permitted target zone and not during neighboring public-space walks.
Incorrect Answers
A:Inspect mobile app permissions, opt-in events, beacon observations, privacy notice and message history. Remediate: Require supported app consent and permission state before engaging users and provide an alternate nonlocation service path. Verify: Opted-in test visitors receive the intended message while those denying permission are not tracked and can browse alternatives. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Reduce and recalibrate the supported engagement-zone geometry using reference movement paths and repeated boundary testing.
C:Inspect UTC timestamps, site timezone, daylight changes, receiver clock and event records. Remediate: Normalize source event times to a consistent reference and retain local display offset separately from recorded occurrence. Verify: The cross-period event history orders movements correctly and raw event time remains unchanged after localization. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Reduce and recalibrate the supported engagement-zone geometry using reference movement paths and repeated boundary testing.
D:Review tracing purpose, badge identifiers, role grants, consent/notice, data storage and retention policy. Remediate: Define lawful purpose, retention, access restrictions and appropriate anonymization before activating supported proximity analytics. Verify: A controlled contact-analysis report supports the approved purpose while unauthorized viewer roles cannot retrieve detailed histories. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Reduce and recalibrate the supported engagement-zone geometry using reference movement paths and repeated boundary testing.
Question 715
After the authorized change, which measurable result most directly demonstrates success? A hospital security team tries to enable automatic rogue containment on every radio detection with no validation of legal or physical scope. Select the ONE best answer.
- An approved rogue test is addressed within policy while nearby legitimate networks remain undisrupted.
- A controlled prohibited destination test fails while approved application paths continue.
- The neighbor AP is not blocked incorrectly and the true unauthorized wired-connected test AP is identified.
- Supported clients finish the guest sign-on and connectivity detection reports actual authorized internet access.
Explanation
Correct Answer
A:Wireless attack detection and active RF containment are different actions that can affect legitimate third-party networks. It validates the controlled change: Require authorized threat classification and applicable containment policy before taking any disruptive radio response.
Incorrect Answers
B:The alternative observation is: A controlled prohibited destination test fails while approved application paths continue. The acceptance test for this case is: An approved rogue test is addressed within policy while nearby legitimate networks remain undisrupted.
C:SSID similarity and radio proximity alone cannot establish that an AP is connected illicitly to the protected wired network. This is a different acceptance outcome; the required result here is: An approved rogue test is addressed within policy while nearby legitimate networks remain undisrupted.
D:The alternative observation is: Supported clients finish the guest sign-on and connectivity detection reports actual authorized internet access. The acceptance test for this case is: An approved rogue test is addressed within policy while nearby legitimate networks remain undisrupted.
Question 716
A change engineer must select a justified corrective intervention. Which should be approved? A deployment enables a 6 GHz-only corporate SSID for older WPA2-only tablets, then blames DHCP when tablets never associate. Select the ONE best answer.
- Validate client 6 GHz and security capability, then supply an approved compatible access method without downgrading 6 GHz security.
- Choose channel widths based on measured concurrency, neighbor cells and available clean channel reuse rather than peak PHY rate.
- Survey representative paths for multipath fading and reflections, then tune placement and channel plan from measured coverage.
- Compare the client supported-rate information against the WLAN required basic rate set and choose a compatible approved profile.
Explanation
Correct Answer
A:Client 6 GHz participation and supported authentication modes are prerequisites before IP address assignment can begin. Before making it, verify: Check supported 6 GHz channels, client radio features, security capabilities, scan events and association stages.
Incorrect Answers
B:That option would choose channel widths based on measured concurrency, neighbor cells and available clean channel reuse rather than peak PHY rate, but it addresses a different concern. Client 6 GHz participation and supported authentication modes are prerequisites before IP address assignment can begin.
C:Survey representative paths for multipath fading and reflections, then tune placement and channel plan from measured coverage. Here the decisive dependency is: Client 6 GHz participation and supported authentication modes are prerequisites before IP address assignment can begin. Use the specified intervention: Validate client 6 GHz and security capability, then supply an approved compatible access method without downgrading 6 GHz security.
D:That option would compare the client supported-rate information against the WLAN required basic rate set and choose a compatible approved profile, but it addresses a different concern. Client 6 GHz participation and supported authentication modes are prerequisites before IP address assignment can begin.
Question 717
Before changing production, which focused diagnostic is most useful for identifying the true dependency? An administrator reviews only the most recent hour of SLE data for a problem that occurs once weekly after automated backup traffic peaks. Select the ONE best answer.
- Inspect source/destination BSSID, roam times, client device types, RF overlap and failed transition events.
- Inspect multiweek SLE trend, workload schedules, busy-airtime history, client counts and wired uplink load.
- Inspect RADIUS timeout logs, EAP failure events, server health, AAA policies and client session timeline.
- Inspect AP online events, EAP certificate errors, RADIUS logs, client join stages and recovery timeline.
Explanation
Correct Answer
B:Inspect multiweek SLE trend, workload schedules, busy-airtime history, client counts and wired uplink load. This check separates the suspected dependency before a risky change. Time-limited telemetry can miss cyclical operational conditions that drive otherwise unexplained service drops. The appropriate intervention is: Expand the observation window and correlate recurring capacity degradation with upstream traffic and scheduled workloads.
Incorrect Answers
A:Roaming is a series of measured handoffs; aggregate performance does not locate the specific failing transition. The focused check for the reported condition is: Inspect multiweek SLE trend, workload schedules, busy-airtime history, client counts and wired uplink load.
C:Wireless association and RADIUS authorization are separate stages; a healthy AP cannot compensate for an unreachable identity node. The focused check for the reported condition is: Inspect multiweek SLE trend, workload schedules, busy-airtime history, client counts and wired uplink load.
D:Inspect AP online events, EAP certificate errors, RADIUS logs, client join stages and recovery timeline. The focused check for the reported condition is: Inspect multiweek SLE trend, workload schedules, busy-airtime history, client counts and wired uplink load.
Question 718
A change engineer must select a justified corrective intervention. Which should be approved? A medical equipment tag never appears on the map after installation even though its human-readable asset label was entered correctly. Select the ONE best answer.
- Expose location timestamp and tag health alongside the map point and require new observations before marking it live.
- Correct floor assignment, receiver height data and site topology then validate vertical separation with reference assets.
- Validate tag transmission format, battery state, receiver support and actual beacon observations before changing map names.
- Update supported site and inventory association and validate receiving-site observations and authorized visibility.
Explanation
Correct Answer
C:An inventory record does not provide physical presence measurements without a compatible and functioning radio signal. Acceptance criterion: A verified tag broadcasts correctly and its fresh observations produce accurate supported site location records.
Incorrect Answers
A:Expose location timestamp and tag health alongside the map point and require new observations before marking it live. Here the decisive dependency is: An inventory record does not provide physical presence measurements without a compatible and functioning radio signal. Use the specified intervention: Validate tag transmission format, battery state, receiver support and actual beacon observations before changing map names.
B:Correct floor assignment, receiver height data and site topology then validate vertical separation with reference assets. Here the decisive dependency is: An inventory record does not provide physical presence measurements without a compatible and functioning radio signal. Use the specified intervention: Validate tag transmission format, battery state, receiver support and actual beacon observations before changing map names.
D:That option would update supported site and inventory association and validate receiving-site observations and authorized visibility, but it addresses a different concern. An inventory record does not provide physical presence measurements without a compatible and functioning radio signal.
Question 719
The operator needs proof rather than a guess. Which investigation should come first? A multi-PSK WLAN has a revoked key that still authenticates devices because an older override contains the same credential. Select the ONE best answer.
- Review device inventory, credential mapping, former and new roles, authorization logs and owner approvals.
- Inspect beaconed SSID inventory, PSK policy configuration, client join results and effective role mappings.
- Review RSN advertised AKMs, PMF requirements, client drivers, EAP logs and WLAN authentication failures.
- Inspect all key entries, effective scopes, client match history, audit events and negative authentication tests.
Explanation
Correct Answer
D:A password can remain usable through an inherited or duplicate authorized entry despite being deleted from one object. This observation directly isolates the suspected dependency before a risky change.
Incorrect Answers
A:Reclassify the device under approved identity and role governance and test policy changes before production acceptance. The focused check for the reported condition is: Inspect all key entries, effective scopes, client match history, audit events and negative authentication tests.
B:Multiple accepted keys can provide differentiated access within a single WLAN without requiring a unique beacon SSID per credential. The focused check for the reported condition is: Inspect all key entries, effective scopes, client match history, audit events and negative authentication tests.
C:Inventory device security support and provide a documented segregated alternative or approved replacement without weakening the corporate WLAN. The focused check for the reported condition is: Inspect all key entries, effective scopes, client match history, audit events and negative authentication tests.
Question 720
Select TWO appropriate investigation, change, and acceptance elements for this situation. A warehouse's asset tracking intermittently places pallets through a concrete wall in adjacent rooms when beacons propagate across the barrier.
- Treat every detected beacon as definitive room containment regardless of wall material or radio propagation.
- Review tracing purpose, badge identifiers, role grants, consent/notice, data storage and retention policy.
- Compare AP geometry, wall attenuation, signal strength distribution, reference path and cross-wall false positives.
- Validate room boundaries using receiver placement and attenuation measurements, then tune supported zone thresholds for the actual building.
- Set realistic precision targets and validate position variance at representative RF-obstructed locations before deployment acceptance.
Explanation
Correct Answer
C:Radio reception through a wall does not prove an object is in the same physical room as the strongest receiving AP. Validate room boundaries using receiver placement and attenuation measurements, then tune supported zone thresholds for the actual building. This check separates the suspected dependency before a risky change.
D:Radio reception through a wall does not prove an object is in the same physical room as the strongest receiving AP. This is the targeted change for the reported environment.
Incorrect Answers
A:Treat every detected beacon as definitive room containment regardless of wall material or radio propagation. This shortcut skips or undermines the needed control. Radio reception through a wall does not prove an object is in the same physical room as the strongest receiving AP. The required remediation is: Validate room boundaries using receiver placement and attenuation measurements, then tune supported zone thresholds for the actual building.
B:This check investigates a different symptom (A privacy team is asked to enable proximity tracing using employee badge positions without defining who can access contact history.). For this incident, the targeted check is: Compare AP geometry, wall attenuation, signal strength distribution, reference path and cross-wall false positives.
E:That option would set realistic precision targets and validate position variance at representative RF-obstructed locations before deployment acceptance, but it addresses a different concern. Radio reception through a wall does not prove an object is in the same physical room as the strongest receiving AP.