Juniper JN0-452 Practice Test 36
Question 350
Which acceptance evidence would show that the original fault or risk was actually remediated? A shopping mall runs a Wi-Fi location feature for guests but incorrectly assumes that a Bluetooth-disabled phone will always supply the same vBLE engagement observations. Select the ONE best answer.
- Controlled test pallets stay assigned to the correct room with a documented false-location rate.
- The report labels each source and uses a defensible occupancy estimate with documented uncertainty.
- Compatible opted-in clients receive correct location services and unsupported devices follow documented alternative behavior.
- Representative tracked carts appear in their actual aisles after a measured walk test and no false neighboring-zone alarms remain.
Explanation
Correct Answer
C:Wi-Fi-based presence and BLE-based proximity are distinct measurements with different radio and client participation requirements. It validates the controlled change: Inventory the actual Wi-Fi and BLE positioning dependencies and confirm app permissions and supported receiver data paths separately.
Incorrect Answers
A:Radio reception through a wall does not prove an object is in the same physical room as the strongest receiving AP. This is a different acceptance outcome; the required result here is: Compatible opted-in clients receive correct location services and unsupported devices follow documented alternative behavior.
B:One person may have multiple radios while some people advertise none; radio counts are not inherently verified human counts. This is a different acceptance outcome; the required result here is: Compatible opted-in clients receive correct location services and unsupported devices follow documented alternative behavior.
D:A location engine depends on accurate transmitter or receiver geometry; device movement can invalidate historic map assumptions. This is a different acceptance outcome; the required result here is: Compatible opted-in clients receive correct location services and unsupported devices follow documented alternative behavior.
Question 351
Which investigation-and-change plan directly addresses the issue and proves the outcome? A Marvis Action indicates an AP has insufficient PoE power, but the wireless team keeps changing security ciphers in response. Select the ONE best answer.
- Investigate: Compare Mini DHCP stage, lease ages, DHCP relay logs, newly joined clients and response timing. Remediate: Investigate fresh lease acquisition through synthetic and newly joining clients rather than relying on established sessions. Verify: New clients and Minis acquire approved leases on time with no disruption to established services.
- Investigate: Inspect action triggers, severity, automation privileges, change approvals and failure simulation outcomes. Remediate: Establish risk-based approval for disruptive operations and require validated action evidence and controlled rollback. Verify: Simulated false alerts do not cause fleet-wide outages and approved remediation is independently verified.
- Investigate: Inspect tenant organization IDs, action scope, operator role, site mapping and ticket attribution records. Remediate: Bind each action to verified organization and site identifiers and enforce tenant-scoped role visibility in its triage process. Verify: Each action is assigned to the correct customer and a cross-customer access test denies unrelated details.
- Investigate: Inspect AP power alarms, switch PoE budget, port LLDP negotiation and radio status. Remediate: Trace the recommended device-power finding to switch PoE logs and AP negotiated operating mode before changing WLAN policy. Verify: The AP obtains adequate supported power and all intended radios and WLANs remain active under test load.
Explanation
Correct Answer
D:Physical power limitations can disable radio features even when client authentication settings are correct.
Incorrect Answers
A:Compare Mini DHCP stage, lease ages, DHCP relay logs, newly joined clients and response timing. Remediate: Investigate fresh lease acquisition through synthetic and newly joining clients rather than relying on established sessions. Verify: New clients and Minis acquire approved leases on time with no disruption to established services. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Trace the recommended device-power finding to switch PoE logs and AP negotiated operating mode before changing WLAN policy.
B:Inspect action triggers, severity, automation privileges, change approvals and failure simulation outcomes. Remediate: Establish risk-based approval for disruptive operations and require validated action evidence and controlled rollback. Verify: Simulated false alerts do not cause fleet-wide outages and approved remediation is independently verified. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Trace the recommended device-power finding to switch PoE logs and AP negotiated operating mode before changing WLAN policy.
C:Inspect tenant organization IDs, action scope, operator role, site mapping and ticket attribution records. Remediate: Bind each action to verified organization and site identifiers and enforce tenant-scoped role visibility in its triage process. Verify: Each action is assigned to the correct customer and a cross-customer access test denies unrelated details. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Trace the recommended device-power finding to switch PoE logs and AP negotiated operating mode before changing WLAN policy.
Question 352
Which acceptance evidence would show that the original fault or risk was actually remediated? A team moves its Marvis Mini testing location from a wired lab to a remote office and attributes newly higher latency to an AP firmware defect. Select the ONE best answer.
- Reviewed cases show a measurable reduction in repeated incidents and mean time to repair at consistent quality.
- Controlled repeat tests distinguish the remote site's WAN latency from any genuine WLAN service issue.
- The corrected site query shows the true event, and the physical AP inventory matches the installation floor.
- A supported repair eliminates the repeating reboot events and client-service metrics remain stable during monitoring.
Explanation
Correct Answer
B:It validates the controlled change: Compare probe geometry, source network and service destination before attributing a changed synthetic result to a radio.
Incorrect Answers
A:The alternative observation is: Reviewed cases show a measurable reduction in repeated incidents and mean time to repair at consistent quality. The acceptance test for this case is: Controlled repeat tests distinguish the remote site's WAN latency from any genuine WLAN service issue.
C:Marvis interpretations depend on telemetry scope, which can be wrong when devices are assigned to incorrect cloud sites. This is a different acceptance outcome; the required result here is: Controlled repeat tests distinguish the remote site's WAN latency from any genuine WLAN service issue.
D:The alternative observation is: A supported repair eliminates the repeating reboot events and client-service metrics remain stable during monitoring. The acceptance test for this case is: Controlled repeat tests distinguish the remote site's WAN latency from any genuine WLAN service issue.
Question 353
Before changing production, which focused diagnostic is most useful for identifying the true dependency? A branch experiences repeated 5 GHz DFS channel vacates but service staff keep retrying a fixed channel without understanding regulatory events. Select the ONE best answer.
- Review country code, DFS event log, channel selection history, channel availability and client rejoin timing.
- Inspect PHY capabilities, per-client MCS, SNR, channel width, retries and local channel events.
- Review planned optimization times, active clients, RF change events, business calendar and before-after SLEs.
- Review RRM history, change timestamps, device retry data, radar events and before-after SLEs.
Explanation
Correct Answer
A:DFS requirements can force spectrum changes independently of user traffic volume or AP physical health. Inspect radar detection and channel-change records and select supported alternative channels with compliant RRM constraints.
Incorrect Answers
B:Inspect PHY capabilities, per-client MCS, SNR, channel width, retries and local channel events. The focused check for the reported condition is: Review country code, DFS event log, channel selection history, channel availability and client rejoin timing.
C:An otherwise valid radio optimization can be operationally harmful if it interrupts sensitive client sessions. The focused check for the reported condition is: Review country code, DFS event log, channel selection history, channel availability and client rejoin timing.
D:Temporal coincidence between a dynamic radio update and a complaint is not enough to prove causation. The focused check for the reported condition is: Review country code, DFS event log, channel selection history, channel availability and client rejoin timing.
Question 354
A change engineer must select a justified corrective intervention. Which should be approved? A medical device fleet loses connectivity during moves between floors although association SLE at each stationary test point is high. Select the ONE best answer.
- Analyze capacity SLE, channel busy measurements and radio contention, then adjust channel reuse or coverage under a controlled plan.
- Deduplicate incident lifecycle notifications while preserving important new context or severity changes for responders.
- Inspect roaming SLE and transition events along the mobility route, including client 802.11k/v/r support and RF overlap.
- Distinguish internal Wireless Assurance targets from contractually agreed SLAs and document their population and measurement rules.
Explanation
Correct Answer
C:Before making it, verify: Review roam transition timestamps, candidate BSSIDs, EAP exchange, RSSI overlap and drop-event classifications. Acceptance criterion: Timed floor-crossing tests show acceptable handoff interruption with preserved secure access and updated roaming SLEs.
Incorrect Answers
A:Analyze capacity SLE, channel busy measurements and radio contention, then adjust channel reuse or coverage under a controlled plan. Here the decisive dependency is: Successful stationary associations do not prove low-delay roaming handoffs during live application mobility. Use the specified intervention: Inspect roaming SLE and transition events along the mobility route, including client 802.11k/v/r support and RF overlap.
B:Deduplicate incident lifecycle notifications while preserving important new context or severity changes for responders. Here the decisive dependency is: Successful stationary associations do not prove low-delay roaming handoffs during live application mobility. Use the specified intervention: Inspect roaming SLE and transition events along the mobility route, including client 802.11k/v/r support and RF overlap.
D:Distinguish internal Wireless Assurance targets from contractually agreed SLAs and document their population and measurement rules. Here the decisive dependency is: Successful stationary associations do not prove low-delay roaming handoffs during live application mobility. Use the specified intervention: Inspect roaming SLE and transition events along the mobility route, including client 802.11k/v/r support and RF overlap.
Question 355
Which technical principle best explains why the problem requires a targeted response? A voice handset sees a long join delay and engineers confuse 802.11 association with subsequent enterprise 802.1X authentication. Select the ONE best answer.
- Joining a BSS and obtaining enterprise network access involve separate protocol transitions with different failure sources.
- The Network Allocation Vector supports virtual carrier sensing by temporarily reserving medium access for expected frames.
- EDCA access categories bias contention opportunities, but incorrect classification can leave delay-sensitive voice behind bulk traffic.
- A full repeated authentication path can add handoff delay, while fast transition is beneficial only when supported and configured correctly.
Explanation
Correct Answer
A:Evidence of correction: A full client trace isolates the failed stage and the repaired handset completes every stage without timeouts.
Incorrect Answers
B:The alternative governing principle is: The Network Allocation Vector supports virtual carrier sensing by temporarily reserving medium access for expected frames. The mechanism tested by the reported case is: Joining a BSS and obtaining enterprise network access involve separate protocol transitions with different failure sources.
C:The alternative governing principle is: EDCA access categories bias contention opportunities, but incorrect classification can leave delay-sensitive voice behind bulk traffic. The mechanism tested by the reported case is: Joining a BSS and obtaining enterprise network access involve separate protocol transitions with different failure sources.
D:The alternative governing principle is: A full repeated authentication path can add handoff delay, while fast transition is beneficial only when supported and configured correctly. The mechanism tested by the reported case is: Joining a BSS and obtaining enterprise network access involve separate protocol transitions with different failure sources.
Question 356
Which investigation-and-change plan directly addresses the issue and proves the outcome? A network engineer changes an organization-wide time zone and later misorders cloud audit events across branch offices. Select the ONE best answer.
- Investigate: Inspect certificate references, RADIUS endpoints, organization IDs, template bindings and client auth failure traces. Remediate: Inventory tenant-specific identity integrations, certificate trust, VLAN attachment and WLAN scope before replicating the configuration. Verify: New-tenant clients complete approved authentication and network segmentation with no references to the former tenant.
- Investigate: Review raw UTC events, time zone display options, device clocks and configuration history. Remediate: Normalize audit timestamps against a common reference and distinguish display time zone from event occurrence. Verify: A cross-site investigation reconstructs the exact event ordering from consistent timestamps and linked actor IDs.
- Investigate: Inspect DHCP relay, gateway address, VLAN membership, physical uplink paths and packet captures. Remediate: Map the chosen forwarding topology, gateway and network services before enabling the new WLAN in production. Verify: Client DHCP and authorized north-south application traffic traverse the documented gateway after cutover.
- Investigate: Inspect subscription expiration, product SKU, service assignment, account warnings and API permission state. Remediate: Review the relevant service entitlement and license assignment before troubleshooting unrelated AP hardware or radio settings. Verify: The required supported service displays valid entitlement and its configuration functions work for eligible inventory.
Explanation
Correct Answer
B:Management-console time presentation does not change when a remote configuration change actually occurred.
Incorrect Answers
A:Inspect certificate references, RADIUS endpoints, organization IDs, template bindings and client auth failure traces. Remediate: Inventory tenant-specific identity integrations, certificate trust, VLAN attachment and WLAN scope before replicating the configuration. Verify: New-tenant clients complete approved authentication and network segmentation with no references to the former tenant. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Normalize audit timestamps against a common reference and distinguish display time zone from event occurrence.
C:Inspect DHCP relay, gateway address, VLAN membership, physical uplink paths and packet captures. Remediate: Map the chosen forwarding topology, gateway and network services before enabling the new WLAN in production. Verify: Client DHCP and authorized north-south application traffic traverse the documented gateway after cutover. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Normalize audit timestamps against a common reference and distinguish display time zone from event occurrence.
D:Inspect subscription expiration, product SKU, service assignment, account warnings and API permission state. Remediate: Review the relevant service entitlement and license assignment before troubleshooting unrelated AP hardware or radio settings. Verify: The required supported service displays valid entitlement and its configuration functions work for eligible inventory. These steps address a different operational problem. They do not connect diagnosis, correction and acceptance criteria for the current requirement. The required change is: Normalize audit timestamps against a common reference and distinguish display time zone from event occurrence.
Question 357
Which evidence-gathering check most directly narrows the cause of this incident? A school wants Marvis to analyze roaming in a location where two APs use a common SSID but the dashboard accidentally excludes the destination AP. Select the ONE best answer.
- Review source/destination BSSIDs, site AP filter, client roam timeline and Marvis observation scope.
- Review client MAC, AP and site visibility, management last-seen, event retention and query scope.
- Inspect EAP failure reasons, server certificate chain, renewal timestamps, client sessions and Marvis query details.
- Inspect session counts, client attempt logs, Mini tests, device online status and observation window.
Explanation
Correct Answer
A:Roaming diagnostics need a complete observation of transition endpoints; partial inventory scope can hide the actual handoff. Include both relevant source and destination radios and examine the recorded transition as a single client movement. This check separates the suspected dependency before a risky change.
Incorrect Answers
B:Review client MAC, AP and site visibility, management last-seen, event retention and query scope. The focused check for the reported condition is: Review source/destination BSSIDs, site AP filter, client roam timeline and Marvis observation scope.
C:Initial AI suggestions should be tested against cross-system evidence when an important security or service event has occurred. The focused check for the reported condition is: Review source/destination BSSIDs, site AP filter, client roam timeline and Marvis observation scope.
D:No observed failures can reflect an empty sample rather than proof every onboarding path works. The focused check for the reported condition is: Review source/destination BSSIDs, site AP filter, client roam timeline and Marvis observation scope.
Question 358
Select TWO appropriate investigation, change, and acceptance elements for this situation. A large warehouse displays one AP receiver as offline but still shows historic position estimates of nearby assets with no warning.
- Apply a documented lifecycle policy to both source observations and derived proximity results, with audit and access controls.
- Inspect receiver last-seen, beacon event timestamps, fallback receiver distribution and confidence estimates.
- Monitor receiver health and qualify affected location accuracy and observation freshness until coverage is restored.
- Inspect client MAC changes, roam histories, BSSID scope, temporal overlap and reference count observations.
- Interpret historic positions as newly measured after the only nearby receiver stops reporting.
Explanation
Correct Answer
B:A receiver failure can reduce the confidence and update rate of asset location estimates even when stored historic records remain. Monitor receiver health and qualify affected location accuracy and observation freshness until coverage is restored. This check separates the suspected dependency before a risky change.
C:A receiver failure can reduce the confidence and update rate of asset location estimates even when stored historic records remain. This is the targeted change for the reported environment.
Incorrect Answers
A:That option would apply a documented lifecycle policy to both source observations and derived proximity results, with audit and access controls, but it addresses a different concern. A receiver failure can reduce the confidence and update rate of asset location estimates even when stored historic records remain.
D:This check investigates a different symptom (A group uses historical Wi-Fi association counts to estimate room occupancy at a timestamp but ignores devices that roam between neighboring APs.). For this incident, the targeted check is: Inspect receiver last-seen, beacon event timestamps, fallback receiver distribution and confidence estimates.
E:Interpret historic positions as newly measured after the only nearby receiver stops reporting. This shortcut skips or undermines the needed control. A receiver failure can reduce the confidence and update rate of asset location estimates even when stored historic records remain. The required remediation is: Monitor receiver health and qualify affected location accuracy and observation freshness until coverage is restored.
Question 359
Which cause-and-effect relationship is most relevant to the described operational risk? A factory tracking report counts rapid repeated location observations as distinct asset movements and vastly overstates utilization. Select the ONE best answer.
- An entry event can occur repeatedly for one visitor and requires product-level state or rate policy to avoid spamming.
- Variable metallic obstacles can shadow low-power radio tags and alter the set of receivers that detect them.
- One stationary tag may generate many repeated radio advertisements without moving physically.
- A stored historic position is not proof the device remains there after the radio tag falls silent.
Explanation
Correct Answer
C:The corresponding supported intervention is: Deduplicate compatible beacon observations and define movement from validated zone transitions rather than raw packet count.
Incorrect Answers
A:The alternative governing principle is: An entry event can occur repeatedly for one visitor and requires product-level state or rate policy to avoid spamming. The mechanism tested by the reported case is: One stationary tag may generate many repeated radio advertisements without moving physically.
B:The alternative governing principle is: Variable metallic obstacles can shadow low-power radio tags and alter the set of receivers that detect them. The mechanism tested by the reported case is: One stationary tag may generate many repeated radio advertisements without moving physically.
D:The alternative governing principle is: A stored historic position is not proof the device remains there after the radio tag falls silent. The mechanism tested by the reported case is: One stationary tag may generate many repeated radio advertisements without moving physically.
Question 360
Which evidence-gathering check most directly narrows the cause of this incident? A staff member obtains a Marvis explanation for a Wi-Fi complaint but cannot reproduce the session because the client MAC was randomized after reconnecting. Select the ONE best answer.
- Inspect action metadata, affected BSSIDs, site membership, proposed remediation and change target scope.
- Inspect client session identifiers, randomized MAC behavior, SSID scope, enrollment records and secure audit trails.
- Review client MAC, AP and site visibility, management last-seen, event retention and query scope.
- Inspect Marvis stage breakdown, management frame timing, EAP exchanges and addressing results.
Explanation
Correct Answer
B:Privacy address randomization can change network identifiers between sessions and complicate naive historical client matching. Correlate supported session and identity data while acknowledging MAC randomization and avoid attributing unrelated devices.
Incorrect Answers
A:Recommended actions can be scoped to individual devices or sites and should not be treated as unrestricted fleet-wide directives. The focused check for the reported condition is: Inspect client session identifiers, randomized MAC behavior, SSID scope, enrollment records and secure audit trails.
C:Review client MAC, AP and site visibility, management last-seen, event retention and query scope. The focused check for the reported condition is: Inspect client session identifiers, randomized MAC behavior, SSID scope, enrollment records and secure audit trails.
D:Connection stages are sequential but distinct; poor association timing does not prove a RADIUS service failure. The focused check for the reported condition is: Inspect client session identifiers, randomized MAC behavior, SSID scope, enrollment records and secure audit trails.