HP HPE7-A01 Practice Test 34
Question 330
A roaming worker remains associated with a distant AP at low data rates after walking into a better-covered corridor. Which specific corrective design step best meets the stated campus requirement?
- Correct the approved SSID profile and group assignment without changing unrelated APs across the organization.
- Use the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits.
- Enable a supported WPA3 enterprise security profile for capable endpoints and provide an approved legacy transition path where necessary.
- Tune supported client steering and RF overlap rather than trying to force all devices onto one AP.
Explanation
Correct Answer
D:Tune supported client steering and RF overlap rather than trying to force all devices onto one AP. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. The proposed configuration targets the stated dependency without broadening unrelated access. The decision applies to the described clientmatch sticky client remediation situation.
Incorrect Answers
A:Correct the approved SSID profile and group assignment without changing unrelated APs across the organization. This instead concerns ap group ssid configuration inheritance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. It would not implement the specifically required change. The immediate problem concerns clientmatch sticky client remediation.
B:Use the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not implement the specifically required change. The immediate problem concerns clientmatch sticky client remediation.
C:Enable a supported WPA3 enterprise security profile for capable endpoints and provide an approved legacy transition path where necessary. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not implement the specifically required change. The immediate problem concerns clientmatch sticky client remediation.
Question 331
A roaming worker remains associated with a distant AP at low data rates after walking into a better-covered corridor. Following a targeted change, which acceptance test would most directly demonstrate success?
- Verify the intended SSIDs and radio settings appear on APs in the authorized group only.
- Confirm clients authenticate with the intended method and assigned role without fallback to an insecure shared secret.
- Verify the roaming client transitions to a suitable nearby AP with lower retries and stable application traffic.
- Confirm capable clients negotiate the intended security and PMF while incompatible devices are handled by policy.
Explanation
Correct Answer
C:Verify the roaming client transitions to a suitable nearby AP with lower retries and stable application traffic. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. The result tests actual working behavior, not merely a saved configuration. The decision applies to the described clientmatch sticky client remediation situation.
Incorrect Answers
A:Verify the intended SSIDs and radio settings appear on APs in the authorized group only. This instead concerns ap group ssid configuration inheritance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. It would not establish that this function actually works. The immediate problem concerns clientmatch sticky client remediation.
B:Confirm clients authenticate with the intended method and assigned role without fallback to an insecure shared secret. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not establish that this function actually works. The immediate problem concerns clientmatch sticky client remediation.
D:Confirm capable clients negotiate the intended security and PMF while incompatible devices are handled by policy. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not establish that this function actually works. The immediate problem concerns clientmatch sticky client remediation.
Question 332
A roaming worker remains associated with a distant AP at low data rates after walking into a better-covered corridor. The change fails acceptance. What is the safest targeted restoration action?
- Restore the prior accepted group profile and AP membership if the new SSID rollout fails acceptance.
- Restore the last healthy steering parameters and reduce aggressive disassociation rules if roaming regresses.
- Restore the approved previous SSID authentication mode and backend reachability for critical clients.
- Restore the previously compatible enterprise SSID on an isolated approved scope pending endpoint remediation.
Explanation
Correct Answer
B:Restore the last healthy steering parameters and reduce aggressive disassociation rules if roaming regresses. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. The focused rollback restores a known safe baseline before another change attempt. The decision applies to the described clientmatch sticky client remediation situation.
Incorrect Answers
A:Restore the prior accepted group profile and AP membership if the new SSID rollout fails acceptance. This instead concerns ap group ssid configuration inheritance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. It would not safely roll back the relevant failed change. The immediate problem concerns clientmatch sticky client remediation.
C:Restore the approved previous SSID authentication mode and backend reachability for critical clients. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not safely roll back the relevant failed change. The immediate problem concerns clientmatch sticky client remediation.
D:Restore the previously compatible enterprise SSID on an isolated approved scope pending endpoint remediation. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not safely roll back the relevant failed change. The immediate problem concerns clientmatch sticky client remediation.
Question 333
A hospital tablet stays connected to its original radio despite multiple neighboring APs with stronger links. Before implementing a remedy, what should the engineer check first?
- Review client RSSI, neighbor candidates, steering or ClientMatch events and actual mobility timing.
- Review the AP's effective group or site assignments and inherited WLAN profile configuration.
- Review the SSID's configured key-management method, EAP or PSK behavior and available authentication backend.
- Review client WPA3/PMF capability, association rejection reason and the WLAN's advertised security elements.
Explanation
Correct Answer
A:Review client RSSI, neighbor candidates, steering or ClientMatch events and actual mobility timing. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. The evidence check isolates the relevant prerequisite before a disruptive change. The decision applies to the described clientmatch sticky client remediation situation.
Incorrect Answers
B:Review the AP's effective group or site assignments and inherited WLAN profile configuration. This instead concerns ap group ssid configuration inheritance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. It does not isolate the cause of the stated incident. The immediate problem concerns clientmatch sticky client remediation.
C:Review the SSID's configured key-management method, EAP or PSK behavior and available authentication backend. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It does not isolate the cause of the stated incident. The immediate problem concerns clientmatch sticky client remediation.
D:Review client WPA3/PMF capability, association rejection reason and the WLAN's advertised security elements. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It does not isolate the cause of the stated incident. The immediate problem concerns clientmatch sticky client remediation.
Question 334
A hospital tablet stays connected to its original radio despite multiple neighboring APs with stronger links. After the root cause is confirmed, which narrowly scoped configuration action should be selected?
- Repair the approved SSID profile and group assignment without changing unrelated APs across the organization.
- Choose the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits.
- Activate a supported WPA3 enterprise security profile for capable endpoints and provide an approved legacy transition path where necessary.
- Tune supported client steering and RF overlap rather than trying to force all devices onto one AP for the affected campus deployment.
Explanation
Correct Answer
D:Tune supported client steering and RF overlap rather than trying to force all devices onto one AP for the affected campus deployment. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. The proposed configuration targets the stated dependency without broadening unrelated access. The decision applies to the described clientmatch sticky client remediation situation.
Incorrect Answers
A:Repair the approved SSID profile and group assignment without changing unrelated APs across the organization. This instead concerns ap group ssid configuration inheritance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. It would not implement the specifically required change. The immediate problem concerns clientmatch sticky client remediation.
B:Choose the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not implement the specifically required change. The immediate problem concerns clientmatch sticky client remediation.
C:Activate a supported WPA3 enterprise security profile for capable endpoints and provide an approved legacy transition path where necessary. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not implement the specifically required change. The immediate problem concerns clientmatch sticky client remediation.
Question 335
A hospital tablet stays connected to its original radio despite multiple neighboring APs with stronger links. A deployment job reports success. Which observed result would actually validate the affected service?
- Confirm the intended SSIDs and radio settings appear on APs in the authorized group only.
- Verify clients authenticate with the intended method and assigned role without fallback to an insecure shared secret.
- Confirm the roaming client transitions to a suitable nearby AP with lower retries and stable application traffic.
- Verify capable clients negotiate the intended security and PMF while incompatible devices are handled by policy.
Explanation
Correct Answer
C:Confirm the roaming client transitions to a suitable nearby AP with lower retries and stable application traffic. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. The result tests actual working behavior, not merely a saved configuration. The decision applies to the described clientmatch sticky client remediation situation.
Incorrect Answers
A:Confirm the intended SSIDs and radio settings appear on APs in the authorized group only. This instead concerns ap group ssid configuration inheritance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. It would not establish that this function actually works. The immediate problem concerns clientmatch sticky client remediation.
B:Verify clients authenticate with the intended method and assigned role without fallback to an insecure shared secret. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not establish that this function actually works. The immediate problem concerns clientmatch sticky client remediation.
D:Verify capable clients negotiate the intended security and PMF while incompatible devices are handled by policy. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not establish that this function actually works. The immediate problem concerns clientmatch sticky client remediation.
Question 336
A hospital tablet stays connected to its original radio despite multiple neighboring APs with stronger links. The review requires TWO complementary actions: one diagnostic check and one controlled configuration remedy. Select TWO actions that together meet those requirements.
- Review the AP's effective group or site assignments and inherited WLAN profile configuration.
- Review client RSSI, neighbor candidates, steering or ClientMatch events and actual mobility timing.
- Choose the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits.
- Tune supported client steering and RF overlap rather than trying to force all devices onto one AP for the affected campus deployment.
Explanation
Correct Answers
B:Review client RSSI, neighbor candidates, steering or ClientMatch events and actual mobility timing. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. This is the required diagnosis or controlled remedy; the other keyed action supplies the complementary role. The decision applies to the described clientmatch sticky client remediation situation.
D:Tune supported client steering and RF overlap rather than trying to force all devices onto one AP for the affected campus deployment. A sticky client may ignore superior nearby APs; steering must work with client behavior and sufficient RF overlap. This is the required diagnosis or controlled remedy; the other keyed action supplies the complementary role. The decision applies to the described clientmatch sticky client remediation situation.
Incorrect Answers
A:Review the AP's effective group or site assignments and inherited WLAN profile configuration. This instead concerns ap group ssid configuration inheritance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. It is not one of the requested paired diagnosis and configuration actions. The immediate problem concerns clientmatch sticky client remediation.
C:Choose the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It is not one of the requested paired diagnosis and configuration actions. The immediate problem concerns clientmatch sticky client remediation.
Question 337
A new wing's AP group inherits an obsolete staff SSID and advertises it despite a campus-wide retirement request. Which investigation would best isolate the immediate network dependency?
- Inspect the SSID's configured key-management method, EAP or PSK behavior and available authentication backend.
- Inspect the AP's effective group or site assignments and inherited WLAN profile configuration.
- Inspect client WPA3/PMF capability, association rejection reason and the WLAN's advertised security elements.
- Inspect AP transmit power, client SNR and cell overlap with a current site survey.
Explanation
Correct Answer
B:Inspect the AP's effective group or site assignments and inherited WLAN profile configuration. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. The evidence check isolates the relevant prerequisite before a disruptive change. The decision applies to the described ap group ssid configuration inheritance situation.
Incorrect Answers
A:Inspect the SSID's configured key-management method, EAP or PSK behavior and available authentication backend. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It does not isolate the cause of the stated incident. The immediate problem concerns ap group ssid configuration inheritance.
C:Inspect client WPA3/PMF capability, association rejection reason and the WLAN's advertised security elements. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It does not isolate the cause of the stated incident. The immediate problem concerns ap group ssid configuration inheritance.
D:Inspect AP transmit power, client SNR and cell overlap with a current site survey. This instead concerns rf transmit power and cell overlap. Excessive RF power can create large cells and mismatched uplink or downlink coverage; design balances client transmit capability and reuse. It does not isolate the cause of the stated incident. The immediate problem concerns ap group ssid configuration inheritance.
Question 338
A new wing's AP group inherits an obsolete staff SSID and advertises it despite a campus-wide retirement request. Which specific corrective design step best meets the stated campus requirement?
- Correct the approved SSID profile and group assignment without changing unrelated APs across the organization.
- Use the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits.
- Enable a supported WPA3 enterprise security profile for capable endpoints and provide an approved legacy transition path where necessary.
- Tune AP power and channel reuse to maintain adequate overlap without creating oversized high-contention cells.
Explanation
Correct Answer
A:Correct the approved SSID profile and group assignment without changing unrelated APs across the organization. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. The proposed configuration targets the stated dependency without broadening unrelated access. The decision applies to the described ap group ssid configuration inheritance situation.
Incorrect Answers
B:Use the approved enterprise 802.1X/EAP design for identity-based access or personal PSK/SAE only where policy permits. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not implement the specifically required change. The immediate problem concerns ap group ssid configuration inheritance.
C:Enable a supported WPA3 enterprise security profile for capable endpoints and provide an approved legacy transition path where necessary. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not implement the specifically required change. The immediate problem concerns ap group ssid configuration inheritance.
D:Tune AP power and channel reuse to maintain adequate overlap without creating oversized high-contention cells. This instead concerns rf transmit power and cell overlap. Excessive RF power can create large cells and mismatched uplink or downlink coverage; design balances client transmit capability and reuse. It would not implement the specifically required change. The immediate problem concerns ap group ssid configuration inheritance.
Question 339
A new wing's AP group inherits an obsolete staff SSID and advertises it despite a campus-wide retirement request. Following a targeted change, which acceptance test would most directly demonstrate success?
- Confirm clients authenticate with the intended method and assigned role without fallback to an insecure shared secret.
- Confirm capable clients negotiate the intended security and PMF while incompatible devices are handled by policy.
- Validate roaming thresholds and retry behavior across the intended coverage boundaries.
- Verify the intended SSIDs and radio settings appear on APs in the authorized group only.
Explanation
Correct Answer
D:Verify the intended SSIDs and radio settings appear on APs in the authorized group only. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. The result tests actual working behavior, not merely a saved configuration. The decision applies to the described ap group ssid configuration inheritance situation.
Incorrect Answers
A:Confirm clients authenticate with the intended method and assigned role without fallback to an insecure shared secret. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not establish that this function actually works. The immediate problem concerns ap group ssid configuration inheritance.
B:Confirm capable clients negotiate the intended security and PMF while incompatible devices are handled by policy. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not establish that this function actually works. The immediate problem concerns ap group ssid configuration inheritance.
C:Validate roaming thresholds and retry behavior across the intended coverage boundaries. This instead concerns rf transmit power and cell overlap. Excessive RF power can create large cells and mismatched uplink or downlink coverage; design balances client transmit capability and reuse. It would not establish that this function actually works. The immediate problem concerns ap group ssid configuration inheritance.
Question 340
A new wing's AP group inherits an obsolete staff SSID and advertises it despite a campus-wide retirement request. The change fails acceptance. What is the safest targeted restoration action?
- Restore the approved previous SSID authentication mode and backend reachability for critical clients.
- Restore the previously compatible enterprise SSID on an isolated approved scope pending endpoint remediation.
- Restore the prior accepted group profile and AP membership if the new SSID rollout fails acceptance.
- Reinstate measured power values from the last acceptable RF survey if the new settings create coverage holes.
Explanation
Correct Answer
C:Restore the prior accepted group profile and AP membership if the new SSID rollout fails acceptance. Group-based WLAN configuration scopes SSIDs and RF behavior; assigning a healthy AP to the wrong group produces a configuration mismatch. The focused rollback restores a known safe baseline before another change attempt. The decision applies to the described ap group ssid configuration inheritance situation.
Incorrect Answers
A:Restore the approved previous SSID authentication mode and backend reachability for critical clients. This instead concerns wpa2 enterprise versus personal authentication. Personal WLAN security uses shared or SAE credentials, while enterprise access uses identity-based EAP; they have different operational prerequisites. It would not safely roll back the relevant failed change. The immediate problem concerns ap group ssid configuration inheritance.
B:Restore the previously compatible enterprise SSID on an isolated approved scope pending endpoint remediation. This instead concerns wpa3 enterprise pmf requirements. Protected Management Frames are required for modern WPA3 modes; clients must advertise compatible security capabilities before association. It would not safely roll back the relevant failed change. The immediate problem concerns ap group ssid configuration inheritance.
D:Reinstate measured power values from the last acceptable RF survey if the new settings create coverage holes. This instead concerns rf transmit power and cell overlap. Excessive RF power can create large cells and mismatched uplink or downlink coverage; design balances client transmit capability and reuse. It would not safely roll back the relevant failed change. The immediate problem concerns ap group ssid configuration inheritance.
