cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 69

Question 680

A voice client obtains an address yet keeps receiving ARP replies for the wrong gateway MAC. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.
  2. Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.
  3. Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.
  4. Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.

Explanation

Correct Answer

C:

Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters. A DHCP lease failure can originate at the client, switch, relay or server; capturing at one side alone is not always conclusive. The paired action is: Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.

Incorrect Answers

A:

Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics. These observations are applicable to FortiSwitch port mirroring to network analyzer, but would not isolate the main failure first. The decisive evidence is: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.

B:

Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls. These observations are applicable to FortiSwitch security profile application and precedence, but would not isolate the main failure first. The decisive evidence is: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.

D:

Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions. These observations are applicable to Config backup and firmware inventory evidence, but would not isolate the main failure first. The decisive evidence is: Inspect Discover/Offer/Request/Ack sequence, ARP requests/replies, VLAN tags, DHCP snooping and DAI counters.

Question 681

One 100G interface is split into smaller links but the automation still targets the original parent port name. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.
  2. Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.
  3. The analyzer receives the intended copies while production forwarding remains unchanged.
  4. Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.
  5. Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims.

Explanation

Correct Answers

A:

Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. A physical QSFP cage does not guarantee that four independent Ethernet child ports can be enabled on every model. Verify the action with: Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect. This is the configuration or remediation half of the requested TWO-step pair.

B:

Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect. A physical QSFP cage does not guarantee that four independent Ethernet child ports can be enabled on every model. The paired action is: Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

C:

The analyzer receives the intended copies while production forwarding remains unchanged. This step concerns FortiSwitch port mirroring to network analyzer and is not part of the required paired solution. The correct action and evidence are: Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. Together with: Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.

D:

Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. This step concerns LLDP-MED voice network policy advertisements and is not part of the required paired solution. The correct action and evidence are: Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. Together with: Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.

E:

Apply appropriate STP root or loop protection to preserve topology while analyzing missing BPDUs and unexpected root claims. This step concerns Root guard and loop guard failure response and is not part of the required paired solution. The correct action and evidence are: Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. Together with: Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.

Question 682

During large file copies, VoIP packets share a congested best-effort queue and experience jitter. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions.
  2. Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN.
  3. Latency-sensitive flows improve under representative load while other business services remain functional.
  4. The current neighboring device and optional endpoint location are visible and match approved cabling documentation.

Explanation

Correct Answer

C:

Latency-sensitive flows improve under representative load while other business services remain functional. QoS prioritizes scarce link capacity but cannot create bandwidth beyond the physical egress rate.

Incorrect Answers

A:

Management connectivity is established across the supported intermediate network without losing segmentation or authentication assumptions. This result relates to FortiLink transport over nontrivial L2 or L3 paths, not the acceptance condition under test. The relevant result is: Latency-sensitive flows improve under representative load while other business services remain functional.

B:

Known unicast traffic reaches the correct access port while unknown traffic is confined to the intended VLAN. This result relates to Layer 2 MAC-learning and forwarding decisions, not the acceptance condition under test. The relevant result is: Latency-sensitive flows improve under representative load while other business services remain functional.

D:

The current neighboring device and optional endpoint location are visible and match approved cabling documentation. This result relates to LLDP neighbor discovery and location information, not the acceptance condition under test. The relevant result is: Latency-sensitive flows improve under representative load while other business services remain functional.

Question 683

A camera on VLAN 120 works locally but cannot reach its video recorder through an aggregation switch. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The impacted client can communicate on the permitted VLAN while unrelated tenant or guest VLANs remain separated.
  2. A planned alternate link remains blocked and takes over predictably without a broadcast storm.
  3. The current neighboring device and optional endpoint location are visible and match approved cabling documentation.
  4. The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline.

Explanation

Correct Answer

A:

The impacted client can communicate on the permitted VLAN while unrelated tenant or guest VLANs remain separated. Link up and successful traffic in one VLAN do not prove every VLAN is correctly provisioned on the path.

Incorrect Answers

B:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. This result relates to MSTP region consistency and designated root, not the acceptance condition under test. The relevant result is: The impacted client can communicate on the permitted VLAN while unrelated tenant or guest VLANs remain separated.

C:

The current neighboring device and optional endpoint location are visible and match approved cabling documentation. This result relates to LLDP neighbor discovery and location information, not the acceptance condition under test. The relevant result is: The impacted client can communicate on the permitted VLAN while unrelated tenant or guest VLANs remain separated.

D:

The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline. This result relates to Zero-touch provisioning and controller dependency checks, not the acceptance condition under test. The relevant result is: The impacted client can communicate on the permitted VLAN while unrelated tenant or guest VLANs remain separated.

Question 684

A camera on VLAN 120 works locally but cannot reach its video recorder through an aggregation switch. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.
  2. Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.
  3. Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.
  4. Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface.

Explanation

Correct Answer

C:

Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop. Link up and successful traffic in one VLAN do not prove every VLAN is correctly provisioned on the path. The paired action is: Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.

Incorrect Answers

A:

Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes. These observations are applicable to STP incident recovery with MAC flap evidence, but would not isolate the main failure first. The decisive evidence is: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.

B:

Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. These observations are applicable to FortiLink control and client VLAN transport separation, but would not isolate the main failure first. The decisive evidence is: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.

D:

Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface. These observations are applicable to FortiSwitch native VLAN versus allowed VLANs, but would not isolate the main failure first. The decisive evidence is: Check client MAC learning, VLAN database, switch uplink tags, gateway ARP and port assignment on every hop.

Question 685

An operator tries to configure 10G on a copper port lacking that interface capability. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect local mode, per-VLAN bridge ID, peer BPDUs, port state, timers and topology-change history.
  2. Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps.
  3. Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.
  4. Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port.

Explanation

Correct Answer

C:

Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid. The paired action is: Set only mutually supported Ethernet port rates and verify operational negotiation instead of forcing mismatched speeds.

Incorrect Answers

A:

Inspect local mode, per-VLAN bridge ID, peer BPDUs, port state, timers and topology-change history. These observations are applicable to RPVST and supported STP mode interoperability, but would not isolate the main failure first. The decisive evidence is: Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.

B:

Review frame error type, CRC/FCS, traffic rates, drops, operational speed, port description and sampled timestamps. These observations are applicable to Managed switch port statistics and counter analysis, but would not isolate the main failure first. The decisive evidence is: Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.

D:

Check group membership table, querier identity, IGMP report traffic, VLAN and target egress port. These observations are applicable to IGMP snooping and multicast receivers, but would not isolate the main failure first. The decisive evidence is: Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.

Question 686

One managed port uses a stale security profile because an override did not synchronize from FortiGate. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.
  2. Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope.
  3. Enable supported DHCP snooping on client VLANs and trust only known DHCP-server or relay-facing links.
  4. Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols.

Explanation

Correct Answer

A:

Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence. A named security profile sitting in configuration is not proof that it was applied to the intended hardware port. Verify the action with: Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.

Incorrect Answers

B:

Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope. This action is relevant to SNMP and sFlow monitoring configuration, not the controlling requirement in this case. Flow samples are estimates and counters vary by port; collecting telemetry cannot replace a controlled packet capture when headers are needed. The targeted response is: Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.

C:

Enable supported DHCP snooping on client VLANs and trust only known DHCP-server or relay-facing links. This action is relevant to DHCP snooping trust-boundary enforcement, not the controlling requirement in this case. Trusting every port defeats DHCP snooping and wrongly distrusting the server uplink may suppress all leases. The targeted response is: Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.

D:

Set measured storm-control thresholds for broadcast, multicast or unknown unicast as supported and validate needed discovery protocols. This action is relevant to Storm-control thresholds and broadcast containment, not the controlling requirement in this case. Overaggressive storm control can break DHCP, ARP or group discovery even when physical links remain healthy. The targeted response is: Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.

Question 687

An installer assumes any FortiSwitch port will auto-discover FortiLink despite model-specific discovery defaults. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles.
  2. The exact dropped direction or incorrect address binding is evidenced before changing a security feature.
  3. Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters.
  4. Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization.
  5. Correlate stack and ISL status to identify the failed path instead of reconfiguring all access VLANs.

Explanation

Correct Answers

A:

Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles. The FortiGate-managed FortiSwitch stack is a managed L2 topology, not automatically a single chassis or universal VSF-like control plane. Verify the action with: Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization. This is the configuration or remediation half of the requested TWO-step pair.

D:

Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization. The FortiGate-managed FortiSwitch stack is a managed L2 topology, not automatically a single chassis or universal VSF-like control plane. The paired action is: Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

The exact dropped direction or incorrect address binding is evidenced before changing a security feature. This step concerns Capture-based DHCP and ARP path isolation and is not part of the required paired solution. The correct action and evidence are: Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles. Together with: Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization.

C:

Check both peer capabilities, auto-negotiation, administrative speed, cable quality and CRC/FCS counters. This step concerns Switch port speed and duplex commissioning and is not part of the required paired solution. The correct action and evidence are: Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles. Together with: Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization.

E:

Correlate stack and ISL status to identify the failed path instead of reconfiguring all access VLANs. This step concerns Stack failure isolation and switch-to-switch port roles and is not part of the required paired solution. The correct action and evidence are: Connect FortiSwitch uplinks through supported FortiLink discovery or approved inter-switch link topology, verifying model port roles. Together with: Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization.

Question 688

An operator applies an edge-port policy to a FortiLink upstream interface and disrupts normal peer BPDUs. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching.
  2. Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes.
  3. Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.
  4. The intended tenant configuration changes while other tenants retain their segmentation and service.
  5. Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.

Explanation

Correct Answers

A:

Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. BPDU guard can disable an intended trunk if incorrectly treated as an end-station port. Verify the action with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy. This is the configuration or remediation half of the requested TWO-step pair.

E:

Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy. BPDU guard can disable an intended trunk if incorrectly treated as an end-station port. The paired action is: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Review spanning-tree topology-change count, MAC instability, BPDU logs, port errors and recent cabling changes. This step concerns STP incident recovery with MAC flap evidence and is not part of the required paired solution. The correct action and evidence are: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. Together with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.

C:

Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links. This step concerns RPVST and supported STP mode interoperability and is not part of the required paired solution. The correct action and evidence are: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. Together with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.

D:

The intended tenant configuration changes while other tenants retain their segmentation and service. This step concerns Multi-tenant change verification and rollback and is not part of the required paired solution. The correct action and evidence are: Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. Together with: Examine BPDU ingress counters, configured edge flag, port-down reason, connected device and recovery policy.

Question 689

A standby FortiLink port never takes over because its intended peer and discovery state were not prepared. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Controller and switch return to supported synchronized software and configuration with test-client services restored.
  2. Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior.
  3. Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.
  4. Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.
  5. Check switch PoE budget, port class, negotiated allocation, PSU state, LLDP-MED power TLV and port events.

Explanation

Correct Answers

B:

Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior. FortiLink split-interface behavior depends on topology; enabling it blindly for same-peer LAG links can break intended aggregation. Verify the action with: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path. This is the configuration or remediation half of the requested TWO-step pair.

C:

Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path. FortiLink split-interface behavior depends on topology; enabling it blindly for same-peer LAG links can break intended aggregation. The paired action is: Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Controller and switch return to supported synchronized software and configuration with test-client services restored. This step concerns FortiLink synchronization and upgrade troubleshooting and is not part of the required paired solution. The correct action and evidence are: Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior. Together with: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

D:

Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links. This step concerns RPVST and supported STP mode interoperability and is not part of the required paired solution. The correct action and evidence are: Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior. Together with: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

E:

Check switch PoE budget, port class, negotiated allocation, PSU state, LLDP-MED power TLV and port events. This step concerns PoE and LLDP-MED endpoint power coordination and is not part of the required paired solution. The correct action and evidence are: Use FortiLink split-interface or standby interfaces only for supported topology and verify active versus backup port behavior. Together with: Inspect FortiLink interface type, split-interface setting, connected peer count, STP state and active management path.

Question 690

A user moves between ports and the stale binding on the old port rejects the new legitimate lease. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.
  2. Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.
  3. Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.
  4. Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Explanation

Correct Answer

B:

Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet. Source guard is an ingress source-binding check, not a full replacement for routed firewall policies or endpoint security. The paired action is: Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.

Incorrect Answers

A:

Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN. These observations are applicable to MAC-based authentication and restricted legacy devices, but would not isolate the main failure first. The decisive evidence is: Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.

C:

Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state. These observations are applicable to NAC dynamic port policy device classification, but would not isolate the main failure first. The decisive evidence is: Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.

D:

Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. These observations are applicable to FortiLink control and client VLAN transport separation, but would not isolate the main failure first. The decisive evidence is: Examine port binding list, packet source IP, ingress VLAN, IP-source guard counters and expected host subnet.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests