cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 57

Question 560

An operator tries to configure 10G on a copper port lacking that interface capability. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors.
  2. Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.
  3. Latency-sensitive flows improve under representative load while other business services remain functional.
  4. Both ends connect at compatible rates with stable errors and required throughput.

Explanation

Correct Answer

D:

Both ends connect at compatible rates with stable errors and required throughput. Incorrect forced port speed or duplex can mimic application loss even when the VLAN configuration is valid.

Incorrect Answers

A:

The correct link establishes at expected negotiated rate without recurring loss-of-signal or CRC errors. This result relates to Optic compatibility and laser diagnostic evidence, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

B:

Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer. This result relates to DHCP snooping trust-boundary enforcement, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

C:

Latency-sensitive flows improve under representative load while other business services remain functional. This result relates to Egress priority scheduling and congestion visibility, not the acceptance condition under test. The relevant result is: Both ends connect at compatible rates with stable errors and required throughput.

Question 561

A camera is categorized as a general workstation and receives an overly broad VLAN assignment. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.
  2. Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN.
  3. Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface.
  4. Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence.

Explanation

Correct Answer

A:

Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. The paired action is: Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.

Incorrect Answers

B:

Check learned client MAC, RADIUS MAC authentication response, access policy, fallback sequence and effective VLAN. These observations are applicable to MAC-based authentication and restricted legacy devices, but would not isolate the main failure first. The decisive evidence is: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

C:

Inspect the port native VLAN, allowed VLAN list, peer tags, learned MACs and relevant FortiGate VLAN interface. These observations are applicable to FortiSwitch native VLAN versus allowed VLANs, but would not isolate the main failure first. The decisive evidence is: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

D:

Inspect DHCP server permitted list, Option 82 insertion/trust state, relay path, client bindings and lease evidence. These observations are applicable to DHCP server allowlist and Option 82 validation, but would not isolate the main failure first. The decisive evidence is: Inspect device fingerprint, policy rule order, assigned VLAN, security profile, client identity and enforcement state.

Question 562

An infected kiosk continues reaching payroll servers despite showing a quarantine label in the controller. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  2. Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.
  3. Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.
  4. Use documented trusted DHCP-server lists or Option 82 information where supported to enforce authorized address assignment.

Explanation

Correct Answer

C:

Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. Quarantine must be enforced at the right switch and VLAN path; a security-alert label alone does not remove access. Verify the action with: Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.

Incorrect Answers

A:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. This action is relevant to FortiGate VDOM-based FortiSwitch tenant assignment, not the controlling requirement in this case. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. The targeted response is: Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.

B:

Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. This action is relevant to NAC dynamic port policy device classification, not the controlling requirement in this case. NAC assignment relies on reliable detection and a defined precedence; a class label is not a substitute for switch-port policy. The targeted response is: Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.

D:

Use documented trusted DHCP-server lists or Option 82 information where supported to enforce authorized address assignment. This action is relevant to DHCP server allowlist and Option 82 validation, not the controlling requirement in this case. DHCP server allowlist and Option 82 metadata provide additional context but cannot correct a failed VLAN or missing upstream relay. The targeted response is: Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.

Question 563

An operator assumes that separate VLAN IDs automatically establish the intended FortiGate policy boundaries for tenants. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Check VDOM assignment, sharing support, allowed VLANs, policy scope, QoS or port-security support and MAC-learning state.
  2. Plan S-VLAN and C-VLAN mapping with the correct FortiLink VDOM and platform support for tenant-tagged traffic.
  3. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  4. Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority.
  5. Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation.

Explanation

Correct Answers

C:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. Verify the action with: Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation. This is the configuration or remediation half of the requested TWO-step pair.

E:

Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. The paired action is: Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

A:

Check VDOM assignment, sharing support, allowed VLANs, policy scope, QoS or port-security support and MAC-learning state. This step concerns Shared port multi-VDOM policy boundaries and is not part of the required paired solution. The correct action and evidence are: Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. Together with: Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation.

B:

Plan S-VLAN and C-VLAN mapping with the correct FortiLink VDOM and platform support for tenant-tagged traffic. This step concerns QinQ outer and inner VLAN tenant mapping and is not part of the required paired solution. The correct action and evidence are: Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. Together with: Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation.

D:

Voice packets receive intended treatment without allowing arbitrary untrusted hosts to claim top priority. This step concerns QoS ingress classification and trust boundaries and is not part of the required paired solution. The correct action and evidence are: Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. Together with: Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation.

Question 564

A pair of distribution FortiSwitch units has dual client uplinks but never formed an MCLAG peer group. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.
  2. Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration.
  3. Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings.
  4. Check switch PoE budget, port class, negotiated allocation, PSU state, LLDP-MED power TLV and port events.

Explanation

Correct Answer

A:

Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology. MCLAG redundancy depends on supported peer-link and aggregate design; two cables alone do not constitute working multichassis aggregation. The paired action is: Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles.

Incorrect Answers

B:

Compare desired switch controller settings, switch synchronization indicators, port VLANs, user roles and post-reboot configuration. These observations are applicable to Managed switch configuration synchronization, but would not isolate the main failure first. The decisive evidence is: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

C:

Examine LLDP transmit state, port profile, neighbor TLVs, advertised VLAN and DSCP or 802.1p settings. These observations are applicable to LLDP-MED voice network policy advertisements, but would not isolate the main failure first. The decisive evidence is: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

D:

Check switch PoE budget, port class, negotiated allocation, PSU state, LLDP-MED power TLV and port events. These observations are applicable to PoE and LLDP-MED endpoint power coordination, but would not isolate the main failure first. The decisive evidence is: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

Question 565

Two MCLAG peers disagree on allowed client VLANs and the same client reaches different gateways depending on active link. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic.
  2. Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.
  3. Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles.
  4. Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.
  5. The offending misassignment is corrected with both permitted traffic and forbidden cross-tenant traffic tested.

Explanation

Correct Answers

B:

Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology. MCLAG redundancy depends on supported peer-link and aggregate design; two cables alone do not constitute working multichassis aggregation. The paired action is: Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles. This is the diagnostic or verification half of the requested TWO-step pair.

C:

Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles. MCLAG redundancy depends on supported peer-link and aggregate design; two cables alone do not constitute working multichassis aggregation. Verify the action with: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

A:

Apply supported egress CoS queue policy to reduce latency under congestion without starving other required traffic. This step concerns Egress priority scheduling and congestion visibility and is not part of the required paired solution. The correct action and evidence are: Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles. Together with: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

D:

Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect. This step concerns FortiSwitch split port breakout mode and is not part of the required paired solution. The correct action and evidence are: Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles. Together with: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

E:

The offending misassignment is corrected with both permitted traffic and forbidden cross-tenant traffic tested. This step concerns Managed tenant troubleshooting across controller and access layer and is not part of the required paired solution. The correct action and evidence are: Configure supported FortiSwitch MCLAG peer groups and peer links before connecting downstream redundant bundles. Together with: Inspect MCLAG peer status, inter-chassis link, negotiated aggregate IDs, VLAN consistency and controller topology.

Question 566

A network engineer selects a breakout option not supported by its FortiSwitch hardware revision. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching.
  2. Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope.
  3. Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.
  4. Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength.

Explanation

Correct Answer

C:

Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping. A physical QSFP cage does not guarantee that four independent Ethernet child ports can be enabled on every model. Verify the action with: Inspect hardware SKU, firmware and phy-mode support, breakout cable specification, child port IDs and port restart effect.

Incorrect Answers

A:

Enable supported BPDU guard only on true edge/client ports, and restore blocked ports after identifying unauthorized switching. This action is relevant to BPDU guard on endpoint-facing ports, not the controlling requirement in this case. BPDU guard can disable an intended trunk if incorrectly treated as an end-station port. The targeted response is: Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.

B:

Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope. This action is relevant to SNMP and sFlow monitoring configuration, not the controlling requirement in this case. Flow samples are estimates and counters vary by port; collecting telemetry cannot replace a controlled packet capture when headers are needed. The targeted response is: Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.

D:

Choose supported Fortinet transceivers and link media based on switch capability, optical reach and wavelength. This action is relevant to Optic compatibility and laser diagnostic evidence, not the controlling requirement in this case. Matching a mechanical optic cage is insufficient to prove optical or firmware compatibility. The targeted response is: Check that selected switch series and transceiver support split port or PHY breakout, and plan the related interface remapping.

Question 567

An engineer trusts every edge port to stop false positives, removing the anti-spoofing boundary. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer.
  2. Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional.
  3. Both ends connect at compatible rates with stable errors and required throughput.
  4. Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.

Explanation

Correct Answer

D:

Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution. DAI validation needs a reliable binding or exception policy; enabling it blindly can interrupt static-IP devices.

Incorrect Answers

A:

Legitimate clients lease addresses while rogue DHCP servers connected to untrusted access ports cannot answer. This result relates to DHCP snooping trust-boundary enforcement, not the acceptance condition under test. The relevant result is: Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.

B:

Only intended traffic is accepted or rejected at the switch while allowed application sessions remain functional. This result relates to Static port ACL forwarding decisions, not the acceptance condition under test. The relevant result is: Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.

C:

Both ends connect at compatible rates with stable errors and required throughput. This result relates to Switch port speed and duplex commissioning, not the acceptance condition under test. The relevant result is: Spoofed ARP replies are dropped while legitimate endpoints maintain gateway ARP resolution.

Question 568

A phone uplink starts receiving unexpected bridge-control frames after someone adds a looped desktop switch. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable.
  2. Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path.
  3. Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs.
  4. A planned alternate link remains blocked and takes over predictably without a broadcast storm.

Explanation

Correct Answer

C:

Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs. BPDU guard can disable an intended trunk if incorrectly treated as an end-station port.

Incorrect Answers

A:

Only approved DHCP servers issue leases and the assigned endpoint identity or location remains traceable. This result relates to DHCP server allowlist and Option 82 validation, not the acceptance condition under test. The relevant result is: Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs.

B:

Rapid MAC moves stop and normal forwarding returns with a verified alternate redundant path. This result relates to STP incident recovery with MAC flap evidence, not the acceptance condition under test. The relevant result is: Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs.

D:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. This result relates to MSTP region consistency and designated root, not the acceptance condition under test. The relevant result is: Accidental downstream switches are contained without disabling legitimate uplinks that should exchange BPDUs.

Question 569

An infected kiosk continues reaching payroll servers despite showing a quarantine label in the controller. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.
  2. Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes.
  3. Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers.
  4. Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.
  5. The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline.

Explanation

Correct Answers

A:

Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. Quarantine must be enforced at the right switch and VLAN path; a security-alert label alone does not remove access. Verify the action with: Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria. This is the configuration or remediation half of the requested TWO-step pair.

D:

Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria. Quarantine must be enforced at the right switch and VLAN path; a security-alert label alone does not remove access. The paired action is: Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. This is the diagnostic or verification half of the requested TWO-step pair.

Incorrect Answers

B:

Apply authorized device-class rules and dynamic port policies after confirming device detection evidence and fallback outcomes. This step concerns NAC dynamic port policy device classification and is not part of the required paired solution. The correct action and evidence are: Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. Together with: Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.

C:

Inspect trusted-port state, Discover/Offer path, DHCP binding table, VLAN and counters for dropped offers. This step concerns DHCP snooping trust-boundary enforcement and is not part of the required paired solution. The correct action and evidence are: Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. Together with: Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.

E:

The switch successfully onboards to the intended FortiGate and retains a recoverable controller-managed baseline. This step concerns Zero-touch provisioning and controller dependency checks and is not part of the required paired solution. The correct action and evidence are: Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. Together with: Check switch quarantine status, ACL/security profile, allowed remediation services, NAC event and release criteria.

Question 570

Two remote sites share overlapping prefixes and a broad static route inadvertently sends traffic to the wrong location. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters.
  2. Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.
  3. Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.
  4. Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log.

Explanation

Correct Answer

C:

Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path. A default route cannot repair local VLAN tagging or a missing neighbor resolution condition. The paired action is: Set a supported default route or precise static prefix toward a reachable next hop and validate return traffic.

Incorrect Answers

A:

Inspect source MAC entries by VLAN, ingress/egress port, address aging, LAG membership and broadcast counters. These observations are applicable to Layer 2 MAC-learning and forwarding decisions, but would not isolate the main failure first. The decisive evidence is: Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.

B:

Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction. These observations are applicable to FortiGate one-arm sniffer across managed switching, but would not isolate the main failure first. The decisive evidence is: Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.

D:

Inspect guard role, BPDU reception, root-ID history, STP port role and loop-condition log. These observations are applicable to Root guard and loop guard failure response, but would not isolate the main failure first. The decisive evidence is: Check route table, next-hop ARP, ingress VLAN, egress interface, prefix length and return-route path.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests