cert
cert-1
cert-2

Pass Fortinet NSE5_FSW_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE5_FSW_AD-7.6 Exam - Verified By Experts
NSE5_FSW_AD-7.6 Premium File

NSE5_FSW_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 64 Questions & Answers. Last Update: Nov 15, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 42 downloads in the last 7 days
block-screenshots
Fortinet NSE5_FSW_AD-7.6 Practice Test 17

Question 160

A firewall analyst captures only the routed interface while the failure occurs between two hosts in one switch VLAN. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.
  2. Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.
  3. Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.
  4. Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings.

Explanation

Correct Answer

A:

Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction. Sniffer placement determines visibility; absence of a packet at one observation point does not prove no packet existed elsewhere. The paired action is: Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

Incorrect Answers

B:

Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics. These observations are applicable to FortiSwitch port mirroring to network analyzer, but would not isolate the main failure first. The decisive evidence is: Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.

C:

Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions. These observations are applicable to Config backup and firmware inventory evidence, but would not isolate the main failure first. The decisive evidence is: Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.

D:

Inspect local and remote chassis and port IDs, TLV freshness, management address, interval and LLDP-MED location settings. These observations are applicable to LLDP neighbor discovery and location information, but would not isolate the main failure first. The decisive evidence is: Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.

Question 161

A branch switch appears offline although its uplink remains green because FortiLink management frames are blocked. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A controlled failure test restores approved management and access connectivity through the designed redundant path.
  2. The intended switch appears in discovery after restoring the precise missing interface or transport prerequisite.
  3. The offending misassignment is corrected with both permitted traffic and forbidden cross-tenant traffic tested.
  4. Authorized monitoring receives timely, interpretable switch evidence without exposing community strings or overwhelming CPU.

Explanation

Correct Answer

B:

The intended switch appears in discovery after restoring the precise missing interface or transport prerequisite. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working.

Incorrect Answers

A:

A controlled failure test restores approved management and access connectivity through the designed redundant path. This result relates to FortiLink HA and MCLAG topology faults, not the acceptance condition under test. The relevant result is: The intended switch appears in discovery after restoring the precise missing interface or transport prerequisite.

C:

The offending misassignment is corrected with both permitted traffic and forbidden cross-tenant traffic tested. This result relates to Managed tenant troubleshooting across controller and access layer, not the acceptance condition under test. The relevant result is: The intended switch appears in discovery after restoring the precise missing interface or transport prerequisite.

D:

Authorized monitoring receives timely, interpretable switch evidence without exposing community strings or overwhelming CPU. This result relates to SNMP and sFlow monitoring configuration, not the acceptance condition under test. The relevant result is: The intended switch appears in discovery after restoring the precise missing interface or transport prerequisite.

Question 162

A FortiGate cluster has HA heartbeats but only the failed member owns a working FortiLink path. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. A planned alternate link remains blocked and takes over predictably without a broadcast storm.
  2. A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop.
  3. Management control and authorized user traffic work over the direct connection without confusing them.
  4. A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

Explanation

Correct Answer

D:

A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning. FortiGate HA design and FortiSwitch stacking/MCLAG are separate mechanisms; their failure paths must both be evaluated.

Incorrect Answers

A:

A planned alternate link remains blocked and takes over predictably without a broadcast storm. This result relates to MSTP region consistency and designated root, not the acceptance condition under test. The relevant result is: A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

B:

A controlled peer or member failure maintains approved client VLAN access without a Layer-2 loop. This result relates to MCLAG multichassis access redundancy, not the acceptance condition under test. The relevant result is: A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

C:

Management control and authorized user traffic work over the direct connection without confusing them. This result relates to Single FortiGate and single FortiSwitch topology, not the acceptance condition under test. The relevant result is: A controlled FortiGate HA failover leaves managed switches authorized and required client access functioning.

Question 163

An operator assumes that separate VLAN IDs automatically establish the intended FortiGate policy boundaries for tenants. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure.
  2. Plan FortiLink management under FortiGate HA with supported links, peer roles and deterministic failover tests.
  3. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  4. Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings.

Explanation

Correct Answer

C:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. Verify the action with: Inspect controller VDOM ownership, VLAN interface parent, port mapping, session policy and IP/routing separation.

Incorrect Answers

A:

Prepare supported provisioning, DHCP, management connectivity and secure bootstrap before assuming a factory-default FortiSwitch will auto-configure. This action is relevant to Zero-touch provisioning and controller dependency checks, not the controlling requirement in this case. Zero-touch deployment works only when the necessary discovery path and identity checks function; a link LED is insufficient. The targeted response is: Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.

B:

Plan FortiLink management under FortiGate HA with supported links, peer roles and deterministic failover tests. This action is relevant to HA FortiGate pair managing switch topology, not the controlling requirement in this case. FortiGate HA design and FortiSwitch stacking/MCLAG are separate mechanisms; their failure paths must both be evaluated. The targeted response is: Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.

D:

Enable IPv4 source guard on supported switch interfaces only with appropriate DHCP snooping or static bindings. This action is relevant to IPv4 source guard and binding-based packet filtering, not the controlling requirement in this case. Source guard is an ingress source-binding check, not a full replacement for routed firewall policies or endpoint security. The targeted response is: Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.

Question 164

A branch telephone gets a guest address because its access port native VLAN was changed during replacement. Which observable result BEST proves the intended FortiSwitch operation or security policy works?

  1. The current neighboring device and optional endpoint location are visible and match approved cabling documentation.
  2. A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior.
  3. Members receive subscribed streams while unsubscribed access ports are not flooded unnecessarily.
  4. An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

Explanation

Correct Answer

D:

An access host receives the right subnet while only approved tagged VLANs traverse the uplink. Native VLAN handling and tagged VLAN membership are different controls; a working physical link does not validate VLAN carriage.

Incorrect Answers

A:

The current neighboring device and optional endpoint location are visible and match approved cabling documentation. This result relates to LLDP neighbor discovery and location information, not the acceptance condition under test. The relevant result is: An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

B:

A failed managed switch can be replaced with supported firmware and restored authorized port/VLAN behavior. This result relates to Config backup and firmware inventory evidence, not the acceptance condition under test. The relevant result is: An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

C:

Members receive subscribed streams while unsubscribed access ports are not flooded unnecessarily. This result relates to IGMP snooping and multicast receivers, not the acceptance condition under test. The relevant result is: An access host receives the right subnet while only approved tagged VLANs traverse the uplink.

Question 165

An office switch is online in FortiGate but every new employee receives the wrong VLAN. Which TWO complementary steps identify the appropriate FortiSwitch response AND the evidence needed to verify it? Select TWO.

  1. Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.
  2. Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses.
  3. Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail.
  4. Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.
  5. Expected members join the trunk and survive a member disconnect without loops or silent black holes.

Explanation

Correct Answers

A:

Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. The paired action is: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. This is the diagnostic or verification half of the requested TWO-step pair.

C:

Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. FortiLink transports management and data; a successful controller heartbeat does not guarantee a user VLAN or firewall session is permitted. Verify the action with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy. This is the configuration or remediation half of the requested TWO-step pair.

Incorrect Answers

B:

Trace DHCP and ARP exchanges at ingress and uplink to distinguish missing requests from blocked or malformed responses. This step concerns Capture-based DHCP and ARP path isolation and is not part of the required paired solution. The correct action and evidence are: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. Together with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

D:

Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction. This step concerns FortiGate one-arm sniffer across managed switching and is not part of the required paired solution. The correct action and evidence are: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. Together with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

E:

Expected members join the trunk and survive a member disconnect without loops or silent black holes. This step concerns Link aggregation and port error recovery and is not part of the required paired solution. The correct action and evidence are: Verify FortiLink management status and user VLAN reachability independently when a switch is authorized but clients fail. Together with: Inspect FortiLink management state, native/tagged VLANs, port membership, FortiGate interface and active firewall policy.

Question 166

A gigabit analyzer drops mirrored frames from multiple saturated 10G sources and the engineer misreads the capture as true link loss. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.
  2. Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions.
  3. Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization.
  4. Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.

Explanation

Correct Answer

A:

Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics. A mirrored stream is passive evidence and can be incomplete if analyzer bandwidth is lower than the observed traffic. The paired action is: Mirror only the relevant source ports or VLAN traffic to a dedicated analyzer destination using supported SPAN settings.

Incorrect Answers

B:

Review filter minimization, capture duration, administrator authorization, sensitive payloads and evidence-sharing restrictions. These observations are applicable to Capture and confidentiality limits in incident response, but would not isolate the main failure first. The decisive evidence is: Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.

C:

Check uplink neighbors, discovered-switch serials, FortiLink eligible ports, ISL cables, topology and controller authorization. These observations are applicable to FortiLink ISL auto-discovery and stack cabling, but would not isolate the main failure first. The decisive evidence is: Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.

D:

Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions. These observations are applicable to Config backup and firmware inventory evidence, but would not isolate the main failure first. The decisive evidence is: Inspect mirror direction, source and destination ports, speed constraints, physical capture link and switch statistics.

Question 167

A mirrored switch port feeds FortiGate but the sniffer filter incorrectly excludes double-tagged frames. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.
  2. Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope.
  3. Select a consistent supported MSTP region and intentional root-bridge placement for loop-free L2 redundancy.
  4. Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices.

Explanation

Correct Answer

A:

Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted. Sniffer placement determines visibility; absence of a packet at one observation point does not prove no packet existed elsewhere. Verify the action with: Verify mirror connection, FortiGate sniffing interface, capture expression, expected VLAN tags and packet direction.

Incorrect Answers

B:

Collect supported SNMP or sFlow telemetry securely with appropriate collector authorization, sampling and interface scope. This action is relevant to SNMP and sFlow monitoring configuration, not the controlling requirement in this case. Flow samples are estimates and counters vary by port; collecting telemetry cannot replace a controlled packet capture when headers are needed. The targeted response is: Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

C:

Select a consistent supported MSTP region and intentional root-bridge placement for loop-free L2 redundancy. This action is relevant to MSTP region consistency and designated root, not the controlling requirement in this case. Different MST configuration identifiers split regions even if switch ports are physically connected. The targeted response is: Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

D:

Distinguish FortiSwitch discovery from authorization, and restore the correct controller ownership without automatically trusting unknown devices. This action is relevant to Controller authorization and pending-switch state, not the controlling requirement in this case. Authorizing a switch is an administrative trust step; pending switch state is not evidence of a routing failure. The targeted response is: Use a supported FortiGate one-arm sniffer or mirrored ingress path to inspect switch traffic where permitted.

Question 168

An engineer creates a strict policy but never assigns it to the access port hosting sensitive terminals. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.
  2. Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations.
  3. Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links.
  4. Use supported intra-VLAN traffic controls when clients in the same broadcast domain must not communicate directly.

Explanation

Correct Answer

A:

Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence. A named security profile sitting in configuration is not proof that it was applied to the intended hardware port. Verify the action with: Inspect port profile assignment, FortiGate controller policy, client role, enforcement counters and overlapping static controls.

Incorrect Answers

B:

Apply a specific restricted VLAN or quarantine mechanism with explicit authorized remediation and monitoring expectations. This action is relevant to VLAN security policy and quarantine actions, not the controlling requirement in this case. Quarantine must be enforced at the right switch and VLAN path; a security-alert label alone does not remove access. The targeted response is: Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.

C:

Use compatible spanning-tree mode across connected switches and verify per-VLAN root and blocked links. This action is relevant to RPVST and supported STP mode interoperability, not the controlling requirement in this case. An STP mode change can change per-VLAN convergence behavior even if existing links remain physically up. The targeted response is: Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.

D:

Use supported intra-VLAN traffic controls when clients in the same broadcast domain must not communicate directly. This action is relevant to Intra-VLAN blocking and isolation boundaries, not the controlling requirement in this case. Routing-level firewall rules may not inspect local Layer-2 forwarding unless intra-VLAN isolation is configured. The targeted response is: Attach an approved port-security or switch-security profile to the correct FortiSwitch access port and verify effective policy precedence.

Question 169

A technician changes a phone port to a trunk but fails to restrict unrelated management VLANs. Which FortiSwitch configuration or corrective action BEST addresses the requirement?

  1. Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover.
  2. Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership.
  3. Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure.
  4. Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.

Explanation

Correct Answer

D:

Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment. Voice tagging is not secured merely because its VLAN ID differs from the workstation's native VLAN. Verify the action with: Review phone tagging capabilities, voice VLAN identifier, LLDP-MED policy, access port configuration and DHCP scopes.

Incorrect Answers

A:

Assign the intended untagged native VLAN and explicitly permit tagged VLANs on an uplink; compare both ends before cutover. This action is relevant to FortiSwitch native VLAN versus allowed VLANs, not the controlling requirement in this case. Native VLAN handling and tagged VLAN membership are different controls; a working physical link does not validate VLAN carriage. The targeted response is: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.

B:

Trace MAC-learning and forwarding across the precise VLAN and repair only missing approved membership. This action is relevant to VLAN access isolation and troubleshooting of membership, not the controlling requirement in this case. Link up and successful traffic in one VLAN do not prove every VLAN is correctly provisioned on the path. The targeted response is: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.

C:

Assign FortiSwitch VLANs and ports to the intended FortiGate VDOM with explicit isolation and governed shared infrastructure. This action is relevant to FortiGate VDOM-based FortiSwitch tenant assignment, not the controlling requirement in this case. A VDOM creates a separate policy and routing context; it does not by itself make a shared physical switch port safe for all tenants. The targeted response is: Use supported native and voice VLAN policies so phones and downstream workstations receive appropriate separate traffic treatment.

Question 170

A new FortiSwitch is connected to a port that was not enabled as FortiLink on FortiGate. Which diagnostic evidence should the FortiSwitch administrator examine FIRST?

  1. Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions.
  2. Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path.
  3. Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.
  4. Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers.

Explanation

Correct Answer

C:

Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial. A green Ethernet link is necessary for many paths but does not prove the FortiLink management protocol or discovery is working. The paired action is: Troubleshoot FortiLink discovery from physical and logical interface configuration through LLDP and management addressing.

Incorrect Answers

A:

Check switch serial, active software version, current synchronized configuration, backup timestamp, integrity and recovery permissions. These observations are applicable to Config backup and firmware inventory evidence, but would not isolate the main failure first. The decisive evidence is: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

B:

Inspect FortiLink mode, physical or aggregate link state, switch authorization, VLAN interfaces and test-client path. These observations are applicable to Single FortiGate and single FortiSwitch topology, but would not isolate the main failure first. The decisive evidence is: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

D:

Check captured port, protocol/MAC/IP filter, platform buffer capacity, capture timestamps and exported packet headers. These observations are applicable to FortiSwitch local packet-capture profile and filters, but would not isolate the main failure first. The decisive evidence is: Inspect FortiGate FortiLink status, supported discovery port, LLDP frames, interface IP, link errors and switch serial.

Fortinet NSE 5 - FortiSwitch 7.6 Administrator (NSE5_FSW_AD-7.6) Practice Tests