cert
cert-1
cert-2

Pass Fortinet NSE4_FGT_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE4_FGT_AD-7.6 Exam - Verified By Experts
NSE4_FGT_AD-7.6 Premium File

NSE4_FGT_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 94 Questions & Answers. Last Update: Nov 19, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 234 downloads in the last 7 days
block-screenshots
Fortinet NSE4_FGT_AD-7.6 Practice Test 9

Question 80

A site-to-site tunnel shows phase one up, but phase two rejects the partner proposal after a security change. The logs identify a perfect-forward-secrecy DH-group mismatch. What should be aligned?

  1. Rebuild the already established phase-one IKE proposal.
  2. Enable IPsec NAT traversal on both endpoints and assume UDP encapsulation automatically resolves mismatched phase-two Diffie–Hellman groups.
  3. Install a static route for the partner subnet before aligning the incompatible phase-two ESP/PFS proposals on the peers.
  4. Compatible phase-two PFS/DH group and ESP settings on the peers, preserving the agreed security requirements.

Explanation

Correct Answer

D:

Phase-two PFS requires both sides to negotiate compatible groups and ESP settings for the child SA. Compare proposals, security policy requirements and debug messages before choosing a mutually approved configuration. After phase two establishes, confirm protected-subnet selectors, routes and firewall policies separately. A compatible configuration should still meet the organization's approved cryptographic strength requirements.

Incorrect Answers

A:

Phase-one negotiation can be established while phase-two fails on its separate cryptographic settings. The log identifies a child-SA PFS mismatch, so compare the configured phase-two Diffie–Hellman groups and ESP settings instead of restarting unrelated phase-one negotiation.

B:

NAT traversal deals with carriage of IPsec through NAT devices, not the mutual agreement of cryptographic parameters for a child security association. A PFS mismatch persists after enabling UDP encapsulation unless the peer proposals are also aligned.

C:

The correct route is needed to carry protected traffic after a tunnel is usable, but it cannot cause incompatible child-SA proposals to negotiate. Align matching phase-two PFS and ESP settings first, then validate routing, selectors and firewall policies.

Question 81

A business allows video meetings but wants to block file-transfer functions in a collaboration application. What is the most suitable control design?

  1. Block HTTP POST requests to the collaboration provider using a broad content-filter rule.
  2. Identify the relevant application or feature signatures, configure a targeted application-control action and verify the traffic is visible to inspection.
  3. Set the broad collaboration application category to Block and add a permit for known meeting media ports.
  4. Inspect inbound collaboration file-upload events and enable an IPS sensor that blocks HTTP upload methods on the currently permitted meeting policy.

Explanation

Correct Answer

B:

FortiGate application control can apply signatures and actions at a finer level than the transport port when the application is identifiable. Test the actual file-transfer function and meeting traffic, verify policy attachment and logs, and assess encrypted protocol or QUIC visibility before relying on the desired signature behavior.

Incorrect Answers

A:

Both permitted meeting signaling and prohibited file transfers may use HTTP POST or other HTTP methods over the same service. A blanket method block cannot reliably distinguish the two application features. Use supported feature-specific application signatures or separately proven traffic identifiers and test permitted meetings.

C:

A category-wide block can stop both meeting and file-transfer functions while an allow on media ports may not identify the intended application features. The stated goal requires fine-grained control without losing meetings, so test signature- or feature-specific actions on the actually matched policy.

D:

Intrusion prevention can identify malicious HTTP request patterns, making its logs relevant to security investigations, but a general upload-method block is not the same as a recognized collaboration file-transfer feature. Legitimate meeting signaling may use similar methods and the target app can shift protocols. Use specific supported application signatures and validate both allowed meetings and denied transfers.

Question 82

An administrator must allow FortiGate web administration only from a secure jump host 192.0.2.15. What configuration most directly addresses the management-plane source requirement?

  1. Publish a FortiGate GUI VIP on every WAN interface.
  2. Set a destination security policy allowing HTTPS only from 192.0.2.15.
  3. Enable HTTPS administrative access on the intended management interface and restrict the administrator trusted host to the jump-host source.
  4. Disable HTTPS on the approved management interface, then enable insecure HTTP on WAN for the same unrestricted administrator account.

Explanation

Correct Answer

C:

FortiGate administrative-access settings control which protocols an interface listens for, and administrator trusted-host restrictions can limit login attempts by source. Bind the jump-host address appropriately, retain emergency recovery access and verify unauthorized sources cannot reach usable management authentication. Avoid exposing unnecessary protocols on WAN interfaces.

Incorrect Answers

A:

A VIP maps destination services and is not a substitute for restricted administrator login sources or local management interface controls. Publishing additional external listeners expands exposure rather than limiting it to the jump host.

B:

Data-plane firewall policies do not necessarily govern the FortiGate local management listener. The controlling administrative-access protocol on the intended interface and administrator trusted-host restriction must be configured and tested directly.

D:

Removing secure management access and exposing cleartext HTTP contradicts the jump-host-only requirement. Keep HTTPS on the appropriate management path and restrict its authenticated administrative sources, with a safe recovery channel.

Question 83

FortiGate contacts its RADIUS server but authentication fails. The server returns an explicit Access-Reject instead of timing out. What does this most strongly indicate?

  1. The request reached a RADIUS policy or credential decision; inspect username, group, conditions and shared-secret-dependent processing before assuming network reachability failure.
  2. Inspect FortiGate-to-RADIUS UDP return traffic and compare the gateway packet capture with the server response counters.
  3. Increase the FortiGate RADIUS response timeout and the maximum request retries.
  4. Review the configured RADIUS client secret and rotate it on both endpoints before reading the server Access-Reject policy logs.

Explanation

Correct Answer

A:

Access-Reject is a response from the RADIUS decision process, unlike a silent transport timeout. Correlate the server’s request and policy logs with the FortiGate authentication test. Check credentials, authorization rules, relevant attributes and server configuration, and confirm only the approved user group is allowed.

Incorrect Answers

B:

Packet capture is useful for timeouts, but the FortiGate already received an explicit Access-Reject. A response path therefore existed for this exchange. The more direct interpretation is that the RADIUS service or its policy rejected the submitted identity or attributes; correlate server decision logs.

C:

Longer timeouts can help a slow RADIUS service, but this server returned an explicit Access-Reject, not an unanswered packet. Additional retries do not change rejected credentials or authorization conditions. Correlate server policy logs and the user attributes associated with this negative decision.

D:

Shared secret integrity is important and mismatches can break RADIUS, so checking configuration is relevant in other failures. An explicit valid Access-Reject, however, calls first for the actual server-side denial cause, credential or group policy. Premature secret rotation can create a new outage without resolving rejected authorization.

Question 84

Antivirus event logs show an infected archive was blocked for an outbound session. An analyst wants to confirm which user and policy were involved. Which evidence should be correlated?

  1. Use only a global IPS signature summary; do not correlate the AV event timestamp and original client source.
  2. Identify the outbound public SNAT pool address without consulting the session time or original source/identity mapping.
  3. Use the administrator audit-change log as the sole record of which user downloaded the malware file.
  4. The AV signature and action with session time, source/destination, matched policy ID and available authenticated user mapping.

Explanation

Correct Answer

D:

Correlate the antivirus detection name, action, timestamp and session/policy identifiers with traffic logs and, if present, FSSO or another identity mapping. Confirm whether the block happened before content delivery and preserve enough evidence to investigate the affected client while minimizing unnecessary data collection. A NATed source may require correlation with the original internal address and login mapping.

Incorrect Answers

A:

An IPS signature summary describes a different detection class and lacks the specific AV event/session linkage. The analyst needs the recorded malware signature, action and traffic tuple, then policy ID and any authenticated user mapping.

B:

Many clients can share an egress NAT pool, so the translated public source alone does not uniquely identify a downloader. Correlate the exact event timestamp, pre-NAT source, policy and authentication logs before attribution.

C:

Administrator change records identify who modified FortiGate configuration, not which employee initiated a blocked outbound file download. Trace security and traffic log session keys with the available FSSO or other identity information.

Question 85

An auditor requests all allowed and denied firewall sessions from the previous Monday, grouped by policy. What is the appropriate logging investigation?

  1. Change the current policy action to Deny and recreate Monday’s session history.
  2. Search existing traffic logs by the correct event-time window, action and policy ID, accounting for time zone and retention.
  3. Use the running session table alone, assuming every previous Monday connection is still active.
  4. Extend FortiAnalyzer retention starting today and assume it reconstructs past sessions that were never collected during the requested Monday time window.

Explanation

Correct Answer

B:

Use the correct date range and time-zone interpretation, filter forwarded traffic events by allow/deny action and policy identifier, and verify that the relevant log storage retained the period. If an expected event class was never logged, disclose that limitation rather than invent a complete history.

Incorrect Answers

A:

Rewriting the live policy cannot reproduce past sessions and could interrupt users. An audit should use retained events, not cause fresh traffic to approximate historical evidence. Historical evidence must come from the stored events, not a new live policy change.

C:

The current session table contains active or recent state, not necessarily every session from a historical day. It is insufficient for an evidence-backed allowed-versus-denied audit. A closed Monday connection will not generally remain in a current session table days later.

D:

Longer future retention preserves events that are actually ingested; it cannot manufacture Monday traffic records never generated or forwarded. Query the existing historical log store with the correct time zone and note any collection gaps honestly.

Question 86

LDAP authentication works, but group-based FSSO access stops after the Collector Agent service crashes. Which component should be checked?

  1. Verify LDAP bind only and assume the passive FSSO user-to-IP feed is healthy if a directory password test succeeds.
  2. Edit the FortiGate firewall group to include every domain user.
  3. Collector Agent event processing and connection to FortiGate, because passive Windows logon identity mapping differs from direct LDAP password validation.
  4. Increase the FSSO cache timeout so old IP-to-user mappings persist longer while the collector stops supplying logon events.

Explanation

Correct Answer

C:

FSSO can obtain identity mappings from a collector monitoring directory logon events, while an LDAP bind test merely verifies direct directory access. Check collector status, agent event inputs, FortiGate connector reachability and known user mappings. Restore the approved collection path and test identity authorization and logoff removal.

Incorrect Answers

A:

An LDAP connectivity/authentication test is not evidence that the FSSO collector is ingesting current Windows logons and forwarding mappings. The crash breaks passive identity collection even when direct LDAP authentication remains usable. Confirm the collector service and learned identities.

B:

Broadening group authorization can make some sessions pass without fixing the collector and violates the intended group restriction. Restore the collector/agent event pipeline, verify the FortiGate connector and then validate member and nonmember policy matching.

D:

Extending mapping expiry during a failed collector outage can preserve stale identities and misassociate reassigned client addresses. Reestablish event collection and compare recent login/logoff timestamps before changing session expiration or group policy.

Question 87

Immediately after a scheduled FortiGuard IPS definition update, a FortiGate starts saturating CPU only during requests to one protected HTTPS service. The policy, traffic volume and physical capacity are unchanged; records show an increase in a particular IPS signature match and expensive decoder work. What targeted change-control investigation is best?

  1. Compare IPS database/signature versions and match logs before and after the update; isolate the new costly signature or decoder in the matched sensor, test a scoped tuning or supported update correction, and confirm blocked exploit coverage remains intact.
  2. Temporarily switch the affected IPS sensor to Monitor for every matching signature while investigating the post-update CPU increase.
  3. Review IPS decode statistics and enable additional applicable protocol decoders on the slow HTTPS service sensor to increase coverage after the update.
  4. Reduce all IPS protocol decoding depth on the affected inbound policy for the duration of the signature rollout.

Explanation

Correct Answer

A:

A correlated signature-package change and a new expensive match support an IPS regression rather than a generic appliance-capacity conclusion. Record the package and engine versions, matched signature ID, sensor filter and per-process resource use on the affected service. Test a tightly scoped signature/action change or vendor-supported corrected package while retaining critical protections elsewhere; measure CPU and exploit blocking before and after.

Incorrect Answers

B:

Monitor can preserve event visibility during an investigation, but changing every signature to nonblocking behavior unnecessarily removes exploit prevention from the protected service. The case already isolates a particular costly signature/decoder after a definition update, supporting more targeted profiling and narrow corrective testing.

C:

Protocol decoders are necessary for some signatures, so checking the effective decoder set is technically relevant. The incident already correlates increased CPU with a particular updated signature and decoder workload, not missing inspection coverage. Enabling further decoders may add cost and obscure the regression. Compare prior and current signature versions and measured per-sensor load before scoped tuning.

D:

Reducing decoder depth may lower CPU, but it also changes detection coverage broadly and bypasses the evidence pointing to a specific signature/update regression. The better approach is to correlate matching signature ID, engine version and workload, then test a supported scoped adjustment with protection verified.

Question 88

A branch has inexpensive broadband and a costly metered WAN link. Backup transfers can tolerate higher latency, but business voice calls cannot. Which SD-WAN policy is most suitable?

  1. Use the metered WAN for every traffic class regardless of quality and cost.
  2. Disable health measurements so backup traffic never fails over.
  3. Route all real-time voice traffic on the cheapest interface.
  4. Steer backup traffic to the low-cost eligible member while giving voice its own measured latency/jitter SLA and fallback.

Explanation

Correct Answer

D:

Define separate SD-WAN service rules for backup and voice, ordered to avoid unintended shadowing. Lowest-cost SLA or a suitable priority strategy can steer backups through broadband, while a voice-specific health check enforces acceptable media quality. Test fallback and confirm actual selected interfaces under degraded-link conditions.

Incorrect Answers

A:

Choosing a high-cost member for every session ignores traffic requirements and can waste metered capacity. The described workloads need different constraints and may use different eligible links. Separate backup cost goals from voice quality objectives instead of forcing identical link selection.

B:

Health measurements help avoid broken links. Removing them for backup traffic could leave large transfers stuck on an unusable path and obscure real failure conditions. A measurable service quality check is important for identifying link outages during large transfers.

C:

Voice quality depends on latency, jitter and loss. A cheap but degraded link may be unsuitable even if available. Use the voice application’s quality measurements in steering decisions. Low cost cannot be allowed to supersede a clearly specified voice jitter target.

Question 89

A site-to-site VPN experiences rekey disruptions every few minutes. Peer logs show inconsistent phase-two SA lifetimes. What should administrators verify?

  1. Increase the phase-one IKE SA lifetime on each endpoint to reduce the frequency of negotiation events.
  2. Compare negotiated IKE/IPsec lifetimes, rekey behavior and compatible proposals on both gateways, using logs around the disruption.
  3. Inspect dead-peer-detection retry events and increase the DPD timeout to prevent the tunnel from being declared unavailable at rekey.
  4. Review local and remote phase-two traffic selectors and expand the protected subnet pair before initiating a new SA.

Explanation

Correct Answer

B:

Check the configured and negotiated phase-one/phase-two lifetimes, rekey initiation and failure details on each peer. Align supported settings where required, and verify that selectors and cryptographic proposals remain compatible. After changing only the relevant parameters, observe multiple rekey cycles and packet loss to confirm stable traffic.

Incorrect Answers

A:

The logs identify phase-two child-SA lifetime inconsistency during repeated disruption, not a failed phase-one proposal or IKE SA expiration. Altering only the IKE lifetime leaves the child-SA rekey mismatch intact. Compare negotiated IPsec lifetimes and the specific exchange that fails at each event.

C:

DPD protects against a genuinely unreachable peer and its timers may affect liveness during loss. Here logs point specifically to incompatible phase-two lifetime and rekey behavior at the disruption times. Changing DPD does not reconcile the negotiated child-SA lifetime or renewal messages.

D:

Selector coverage matters for which subnets an SA can protect, but the tunnel repeatedly works between rekey events and the logged discrepancy is the child-SA lifetime. Widening the protected scope can introduce unnecessary access without resolving lifetime/rekey timing differences. Compare actual negotiated SA lifetimes first.

Question 90

An FGCP active-passive pair is scheduled for a controlled failover. Administrators want existing supported sessions to continue as smoothly as possible. What configuration and test are needed?

  1. Enable session pickup on two FortiGates running incompatible firmware that are not members of the same synchronized FGCP cluster.
  2. Disable heartbeat connectivity just before failover, assuming any manually promoted device can reconstruct established session state without synchronization.
  3. Confirm supported session-pickup/session synchronization settings and verify session continuity under a controlled failover.
  4. Enable HA override and increase priority on the secondary, but do not enable supported session synchronization or test the application sessions.

Explanation

Correct Answer

C:

Configure session pickup where supported for the application and cluster design, verify HA state/configuration synchronization and monitor protected interfaces. Use a controlled failover test with representative TCP sessions and application checks; some protocols and sessions may still reconnect, so document observed limits rather than promise universal zero-loss.

Incorrect Answers

A:

Session pickup requires a supported synchronized cluster. Incompatible versions or nonmembers cannot be assumed to share coherent session state merely because the setting is selected. Verify FGCP health and supported model/firmware first.

B:

Heartbeat and synchronization maintain cluster awareness and state exchange. Severing the heartbeat can create dual-primary risks, and a new primary cannot infer all established session details without a valid pickup mechanism.

D:

Override and priority influence primary-member election, not necessarily established TCP state continuity. Confirm compatible session-pickup settings and synchronization, then perform a controlled failover with real applications and measured interruption.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests