cert
cert-1
cert-2

Pass Fortinet NSE4_FGT_AD-7.6 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
NSE4_FGT_AD-7.6 Exam - Verified By Experts
NSE4_FGT_AD-7.6 Premium File

NSE4_FGT_AD-7.6 Premium File

$69.99
$76.99
  • Premium File 94 Questions & Answers. Last Update: Nov 19, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 234 downloads in the last 7 days
block-screenshots
Fortinet NSE4_FGT_AD-7.6 Practice Test 18

Question 170

A category rule blocks a company's approved social-media support portal. Security wants ordinary personal social sites restricted. What application-control change is defensible?

  1. Change the social-networking category action to Allow for the shared policy and compensate by logging ordinary personal browsing.
  2. Create a static web-filter URL Allow entry for the portal while retaining the application-control signature that produces its Block verdict.
  3. Create an FQDN destination address for the support portal and place it on the current category-blocking rule.
  4. Override only the blocked support-portal application signature on the correct profile, keeping other social apps prohibited.

Explanation

Correct Answer

D:

A broad social-media category can include both an approved support platform and unsanctioned personal apps. Use app-control logs to identify the matching signature and profile action, validate the authorized application, then apply an explicit narrow exception within the supported matching order. Test both the approved application and known blocked traffic after the change.

Incorrect Answers

A:

Category-wide Allow permits the other social apps that must remain restricted, and monitoring logs do not replace a block. A verified signature-level exception or narrowly scoped rule is needed for the approved portal.

B:

A URL Allow can influence web filtering but need not override an independent application-control Block signature. The operator must find the actual application-control match and apply a scoped override while preserving broader category restrictions.

C:

FQDN matching can restrict which destination is in a rule, but merely adding the portal to a rule whose application-control category remains Block will not exempt the intended app. The blocking signature/action must be scoped appropriately.

Question 171

A workstation SYN enters port3 and exits port5, but a sniffer sees no SYN-ACK on port5 from the server. The firewall rule is allowed. Where should the operator look?

  1. Inspect established TCP session-table timers for the permitted workstation connection and lengthen the server flow timeout.
  2. Check whether the LAN-to-server policy uses source NAT and enable interface-address translation to simplify the server’s return route.
  3. Disable antivirus inspection on the accepted flow to see whether the expected TCP SYN-ACK appears at the server-side interface.
  4. Capture on the server-side port and verify listener response and server return route before changing the matching firewall permit.

Explanation

Correct Answer

D:

An absent SYN-ACK from the server can mean upstream path, server listener or return routing failure; packet captures at both FortiGate interfaces localize the gap. Capture the same SYN at both FortiGate interfaces and verify whether a SYN-ACK ever returns from the server-side segment. If no reply reaches the firewall, inspect the server listener and return path before changing an already matched permit rule.

Incorrect Answers

A:

A timeout can explain the disappearance of an established connection, but this trace shows a SYN reaching the server-side interface with no SYN-ACK returning. Increasing the idle timer does not cause a server to listen or choose a correct reply route. Capture the actual server response and return gateway.

B:

Source translation can be useful in deliberate designs where the server cannot route toward the original client. The case has not established that routing constraint, and an unnecessary NAT change may obscure client identity. Observe whether the server receives the SYN and where it replies before altering the ACCEPT policy.

C:

Antivirus inspection cannot explain an absent initial SYN-ACK from a server if no response has been generated or reached the capture. The problem should be localized by a server-side sniffer, listener state and return route before weakening scanning.

Question 172

On a shared Windows workstation, employee A logs out and employee B logs in. FortiGate still applies A's group policy to the source IP. What must change?

  1. Review the FSSO logon timeout and extend cached workstation identity lifetime to avoid policy churn during shift changes.
  2. Assign the shared workstation address to a permanent FSSO policy group accepted for both employees across their shifts.
  3. Inspect the workstation DHCP lease history and renew the lease after employee B signs in, without clearing employee A’s stale FSSO user-to-IP record.
  4. Expire employee A’s stale FSSO mapping and verify employee B’s new logon/group before granting the shared workstation access.

Explanation

Correct Answer

D:

A shared workstation can change human owner without changing IP; expire the old FSSO mapping at logout and require a fresh mapping for the next user. After employee A logs out, verify that the collector expires the old user-to-IP mapping and that employee B's new logon generates the correct group entry. Test both identities on the same workstation, preserving access restrictions through the handoff.

Incorrect Answers

A:

A longer user-to-IP cache lifetime increases the period during which an old employee’s identity can remain assigned to a shared machine. The requirement is to end A’s authorization when A logs off and verify B’s new login, not preserve A’s mapping across the change.

B:

An IP-address shortcut avoids recognizing the actual logged-on user and collapses distinct user-group entitlements. The correct mechanism must retire A’s prior association and use B’s newly collected identity event.

C:

DHCP changes the client address allocation; it does not inherently send an FSSO logoff or invalidate the older user mapping. The same shared source IP may continue being attributed to employee A. Expire the obsolete logon mapping and verify employee B’s fresh identity and permitted group before access.

Question 173

After changing wan2 from 192.0.2.2/24 to 198.51.100.2/30, the old static default route still references 192.0.2.1. FortiOS does not install it. What should be checked?

  1. Set the old 0.0.0.0/0 static route administrative distance to 1 while retaining its 192.0.2.1 gateway.
  2. Create a policy route for internet traffic pointing to 192.0.2.1 through wan2 while keeping the new /30 interface assignment.
  3. Install a new static default route via wan2 with destination 0.0.0.0/0 but reuse the previous 192.0.2.1 gateway address.
  4. Replace the old 192.0.2.1 gateway with the reachable ISP next hop for wan2’s new 198.51.100.2/30 link.

Explanation

Correct Answer

D:

The next-hop gateway must be reachable on the relevant outgoing interface or an accepted recursive path; a stale interface subnet can invalidate the route. The wan2 subnet changed; check whether its old next hop still belongs to the connected link or can be resolved by a supported path. Update the route to the actual reachable provider gateway and verify installation before changing unrelated security policies.

Incorrect Answers

A:

A lower distance ranks otherwise eligible routes but cannot make the old gateway reachable from newly addressed wan2. The connected subnet is now 198.51.100.0/30, so the next hop must be updated to the verified provider gateway.

B:

Policy route selection does not make an off-link old gateway reachable. The operator must validate a next hop on the new provider /30 and install a usable default path before using more granular policy steering.

C:

Recreating the route object is insufficient if the next hop is stale. FortiOS must resolve the gateway through an eligible connected path; the new wan2 subnet no longer includes 192.0.2.1.

Question 174

An inbound email attachment is a password-protected ZIP. FortiGate AV cannot inspect the inner file, but the policy requires a defined risk response. What is appropriate?

  1. Log the attachment as clean when no signature matched the visible outer ZIP container, while retaining a copy for post-delivery investigation.
  2. Create an antivirus file-type exception for encrypted ZIP attachments and apply ordinary malware scanning to all other email files.
  3. Apply the approved block/quarantine or alternate-handling policy for password-protected, unscannable email archives, without labeling the encrypted inner attachment as scanned clean.
  4. Increase the maximum archive file size and recursion depth until the password-protected ZIP is included in all AV engine scans.

Explanation

Correct Answer

C:

The AV engine cannot reliably inspect the hidden content of a password-protected archive without the decryption information. Determine the effective profile action for unscannable files and the organizational fail-open/fail-closed requirement. Use a narrowly authorized quarantine, alternate sandboxing or controlled exception where supported, retain an event trail and avoid calling a permitted encrypted archive malware-free.

Incorrect Answers

A:

No signature on the container does not prove the password-protected inner contents were examined. A fail-open decision requires explicit policy/risk authorization and handling; it cannot be silently represented as an AV clean scan.

B:

An archive exception avoids scan errors but automatically allows precisely the content whose risk remains unknown. The case requires an explicit unscannable-file decision, approved alternate scanning or quarantine action rather than a general bypass.

D:

Size and recursion limits do not provide the password required to decrypt protected archive members. The operator must apply the specified fail/block or alternate workflow and record any approved residual-risk exception.

Question 175

The peer responds correctly and protected traffic passes once a user starts it, but an operator expects the child SA to be established before the first user packet. Which setting is relevant?

  1. Review the local-to-remote VPN firewall security policy and extend its schedule to always permit selected protected traffic even while both endpoints remain idle.
  2. Decrease the static tunnel route distance so the route is selected before any protected user packet exists.
  3. Enable more frequent dead-peer detection for the phase-one peer to keep the child association created.
  4. Check whether the phase-two SA is configured for on-demand negotiation or automatic establishment and test initiation from an authorized protected subnet.

Explanation

Correct Answer

D:

A healthy IKE phase one does not mean a child SA must exist before traffic demands it. Inspect the configured phase-two auto-negotiate setting and source/destination selectors, then initiate a permitted protected flow to observe whether SA establishment begins. If always-on tunnels are required, select a supported auto-negotiate or keepalive design and monitor actual child-SA state.

Incorrect Answers

A:

A correct firewall policy is essential for actual protected application packets and schedule restrictions can prevent user traffic from passing. But an allow policy does not ordinarily generate protected packets or force idle child-SA establishment. The question asks for a tunnel negotiated before the first user packet; use the supported phase-two auto-negotiate setting and test its SA state without user traffic.

B:

Routing eligibility may direct the first packet to an IPsec interface and thereby trigger an on-demand negotiation, but installing a route by itself need not establish a child SA without traffic. If an idle tunnel must be up in advance, evaluate the documented automatic-establishment configuration rather than distance alone.

C:

Dead-peer detection determines whether an IKE peer remains reachable and can assist cleanup of failed state, but its probes do not necessarily instantiate a child SA before user data exists. Identify whether phase-two auto-negotiate is disabled and test supported on-demand versus automatic initiation behavior.

Question 176

An AWS subnet has verified route-table steering through FortiGate-VM, and a new HTTPS session matches the FortiGate ACCEPT policy. The destination EC2 network interface has a VPC Flow Logs REJECT event for that flow; review also confirms its associated security group lacks a TCP/443 inbound allow from the approved post-NAT source, while the subnet network ACL permits the flow. A teammate says FortiGate ACCEPT makes AWS security-group rules unnecessary. Which action restores this specific approved session while retaining both controls?

  1. Keep cloud route steering intact; permit the exact HTTPS flow in the EC2 security group and verify return-path ACLs.
  2. Inspect the FortiGate-VM session’s matched policy and add a dedicated HTTPS allow for the same source and destination.
  3. Review the destination EC2 instance’s security-group ingress and allow TCP/443 from every VPC subnet containing an inspected application.
  4. Reroute traffic around FortiGate-VM directly to the EC2 destination while keeping the destination security-group denial in place.

Explanation

Correct Answer

A:

FortiGate-VM has already accepted the flow, but AWS independently enforces security groups on the destination ENI and subnet network ACLs. A VPC Flow Logs REJECT is evidence of AWS-side rejection, not proof by itself of a particular security-group rule; this case additionally confirms the effective security group lacks the scoped HTTPS source permit and the NACL admits the flow. Allow precisely the approved post-NAT source and TCP/443, preserve cloud route steering, and validate new request/response records without widening unrelated permissions.

Incorrect Answers

B:

Confirming the FortiGate policy is sound is reasonable, but the flow already matches an ACCEPT rule. The destination ENI VPC Flow Logs event reports REJECT and configuration inspection identifies the absent security-group TCP/443 source permit, with subnet ACL traffic allowed. Another FortiGate allow rule cannot override this separate AWS security-group decision. Apply only the specified approved inbound source and port, then verify the new session.

C:

Cloud security groups must admit permitted inspected traffic, but broadening ingress to every application subnet may exceed the authorized source specified by the actual request. The firewall ACCEPT event does not authorize all possible cloud sources. Add the precise approved HTTPS source scope and verify reverse-path controls.

D:

Bypassing inspection does not make a packet pass a separate security group that still denies it and would violate the approved service-insertion path. The correct scope is the destination instance’s matching cloud rule plus return routing.

Question 177

A vendor technician may access only the DMZ support server on TCP 443 from an approved external source during a 48-hour maintenance window. Security requires automatic expiry and no access to unrelated hosts. Which FortiGate policy approach fits?

  1. Inspect the approved vendor source and HTTPS destination, create an Always-scheduled restrictive policy, and ask operations to remove it after maintenance.
  2. Create a logged 48-hour vendor-to-support-server TCP/443 permit with exact source, destination and schedule; confirm automatic expiry.
  3. Review the vendor source-address object and use a 48-hour scheduled rule that permits all TCP services to the single DMZ support host.
  4. Use an exact source and service object for the vendor but keep the broader WAN-to-DMZ permit ahead of it for compatibility.

Explanation

Correct Answer

B:

Bind the temporary vendor rule to approved source identity/IP, the exact destination and service, and a time-bounded schedule with an owner and rollback. Test one authorized session and confirm that a nonapproved source remains denied throughout the window.

Incorrect Answers

A:

Exact source, target and service matching reduce scope, but a manual removal reminder does not meet the explicit automatic forty-eight-hour expiry requirement. Use a bounded schedule on the authorized rule, log it, test within the window and verify access ends when the schedule expires.

C:

The time window and destination would be narrowed, but this alternative unnecessarily opens SSH, RDP or other TCP ports on a sensitive support host. The approved need is TCP/443 only from the authorized vendor source; enforce that precise service together with the scheduled expiry.

D:

An earlier broad permit can shadow the intended scoped rule, leaving access to unrelated servers. Place the specific vendor rule in the effective order and remove/repair any overbroad matching permit before relying on its restrictions.

Question 178

The FortiGate reports 200 IPS signature matches from one source within seconds. An analyst claims there were 200 independent breaches. Which conclusion is justified?

  1. Use the IPS event count as an estimate of unique successful exploitation because each signature match represents a separate logged connection.
  2. Increase the IPS logging threshold so repeated signature matches are suppressed, then assess the reduced count as evidence attacks stopped.
  3. Classify each Block-action IPS event as a successful host compromise because FortiGate chose a prevention verdict.
  4. Deduplicate IPS detections by signature, flow, time and action; investigate corroborated host impact rather than counting alerts as breaches.

Explanation

Correct Answer

D:

One exploit attempt may create many signature events; correlate source/destination tuple, signature ID, time and action before counting distinct incidents. Correlate the 200 IPS events by session identifier, signature ID, source/destination and action before counting separate attacks. Compare actual endpoint alerts and unique flows; signature hit count by itself is neither unique incidents nor proof of compromise.

Incorrect Answers

A:

An IPS signature log may correspond to a probe, retry or multiple detections in one flow, and an event does not certify successful compromise. Correlate signatures, sessions and response actions with host evidence.

B:

Log throttling or suppression changes the observed event volume without proving that the source stopped probing or that the destination is safe. Retain sufficient security evidence and distinguish unique flows from duplicates.

C:

A Block action indicates an observed signature match was denied or reset at the inspection layer. It is evidence of attempted exploitation, not proof the protected host was compromised before the drop.

Question 179

Voice calls degrade while both SD-WAN links report good packet loss; the performance SLA permits unusually high jitter. What should be calibrated?

  1. Extend the voice jitter threshold from its current value to 250 ms so both working WAN links stay SLA compliant.
  2. Reduce the preferred WAN's static-route distance so it remains selected when call quality degrades.
  3. Set the voice SLA’s jitter tolerance based on application requirements and validate member eligibility during representative calls.
  4. Use successful periodic reachability probes as sufficient evidence that both SD-WAN links are suitable for voice calls.

Explanation

Correct Answer

C:

Voice quality depends on realistic loss, delay and variation thresholds; use measured call performance and meaningful health-check targets instead of making jitter limits permissive. For voice sessions, compare real latency and jitter against measured call quality and the configured SD-WAN SLA thresholds. A permissive jitter threshold can leave a technically healthy but audibly degraded member eligible for traffic.

Incorrect Answers

A:

Relaxing the threshold makes more links eligible even when measured jitter is unacceptable for calls. The issue already occurs despite good loss measurements, so application-relevant jitter bounds must be tightened and validated with representative voice traffic, not made easier to pass.

B:

Static administrative distance affects ordinary route preference, not the measured jitter of the underlying circuit. For quality-sensitive traffic, an SD-WAN service rule must use an SLA calibrated to the voice workload. A lower route distance cannot turn a high-jitter link into a good voice path.

D:

A probe showing that an address responds can establish availability without demonstrating acceptable jitter for real-time media. The stated failure occurs while packet loss is good and jitter is too high. Apply explicit jitter/latency criteria and observe actual member eligibility during calls.

Question 180

A payment application negotiates TLS successfully with certificate inspection, but enabling FortiGate full SSL inspection triggers a handshake failure before the HTTP request. The managed client already trusts the inspection CA, and logs suggest a protocol-version or cipher disagreement. Which diagnostic action should precede a broad bypass?

  1. Check the SSL/SSH inspection profile’s upstream certificate-validation action and set the vendor origin certificate to the approved trusted list.
  2. Inspect SSL handshake alerts, supported protocol versions and cipher overlap before a narrowly scoped compatibility exception.
  3. Inspect the FortiGate egress SNAT address used by the payment client and move the application to the other approved public pool.
  4. Convert all HTTPS firewall policies to certificate-only inspection to preserve TLS compatibility while retaining equivalent malware payload inspection.

Explanation

Correct Answer

B:

Deep inspection changes the TLS handshake path; inspect supported cipher suites, protocol negotiation, certificate trust and application certificate pinning before an exception. The client already trusts the inspection CA, so inspect the failed handshake's TLS version, cipher negotiation, pinned identity and FortiGate SSL/SSH profile. Avoid a blanket bypass until a concrete compatibility failure is documented and any exception is narrowly scoped.

Incorrect Answers

A:

Upstream certificate verification is a genuine TLS-inspection control, but the reported handshake evidence points to incompatible protocol versions or ciphers rather than an untrusted issuer. Changing CA exceptions does not establish algorithm overlap between the client, proxy and server. Read the failed negotiation alert before adding trust.

C:

SNAT affects the server-visible source and return routing, so it can matter for source-restricted vendor services. This case already differentiates a certificate-inspected working session from deep-inspection cipher or protocol failure. Changing a public source does not make the TLS interception engine negotiate an unsupported cipher suite.

D:

Certificate-only inspection can avoid decrypting some traffic but cannot preserve payload-level scanning equivalently. The scenario calls for isolating a limited handshake compatibility issue, not weakening inspection for all applications.

Fortinet NSE 4 - FortiOS 7.6 Administrator (NSE4_FGT_AD-7.6) Practice Tests