Fortinet FCP_FAZ_AN-7.6 Practice Test 83
Question 820
A SOC wants to combine related alerts while preserving that a different host may require another investigation. The observed fault is: Merging unrelated incidents can hide distinct attack paths and remediation tasks. Which remediation best corrects the root cause?
- The corrective action is to reconcile identities and chronology, merge supported duplicates and keep audit references.
- The corrective action is to assume matching incident titles prove exact source-event equivalence.
- The corrective action is to merge every incident with the same severity regardless of assets.
- The corrective action is to delete one case and all its only-existing raw references.
Explanation
Correct Answer
A:Recheck Incident entity mapping, event IDs, duplicate criteria, audit history and resulting case links.
Incorrect Answers
B:Assume matching incident titles prove exact source-event equivalence. Merging unrelated incidents can hide distinct attack paths and remediation tasks. Instead, reconcile identities and chronology, merge supported duplicates and keep audit references.
C:Merge every incident with the same severity regardless of assets. Merging unrelated incidents can hide distinct attack paths and remediation tasks. Instead, reconcile identities and chronology, merge supported duplicates and keep audit references.
D:Delete one case and all its only-existing raw references. Merging unrelated incidents can hide distinct attack paths and remediation tasks. Instead, reconcile identities and chronology, merge supported duplicates and keep audit references.
Question 821
A newly created playbook has three actions but none run because its event trigger never fires. Which administrator action meets the documented requirement?
- Assume task names themselves create a trigger on every incoming log.
- Leave a playbook disabled and treat its existence as active containment.
- Replace the incident trigger with a report page title.
- Configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
Explanation
Correct Answer
D:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution. This is the targeted correction for playbook starter trigger versus task actions.
Incorrect Answers
A:Assume task names themselves create a trigger on every incoming log. A wrong or disabled starter trigger leaves downstream tasks idle. Use configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
B:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
C:Replace the incident trigger with a report page title. This leaves the operational requirement unresolved. A wrong or disabled starter trigger leaves downstream tasks idle. The supported correction is configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
Question 822
A newly created playbook has three actions but none run because its event trigger never fires. Which observations should the engineer inspect before declaring success?
- An automation playbook name with no job history or target outcome.
- A connector icon without authorization or current API response.
- An unrelated incident status with no matching event or task audit.
- Playbook trigger settings, event or incident match, enabled state and task execution history.
Explanation
Correct Answer
D:These observations directly test playbook starter trigger versus task actions under the actual system state. A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
Incorrect Answers
A:An automation playbook name with no job history or target outcome. The relevant evidence is playbook trigger settings, event or incident match, enabled state and task execution history. A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
B:A connector icon without authorization or current API response. The relevant evidence is playbook trigger settings, event or incident match, enabled state and task execution history. A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
C:An unrelated incident status with no matching event or task audit. The relevant evidence is playbook trigger settings, event or incident match, enabled state and task execution history. A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
Question 823
A newly created playbook has three actions but none run because its event trigger never fires. Which platform statement is MOST accurate for this scenario?
- A saved playbook without an eligible trigger automatically performs all tasks.
- An incident marked resolved proves a remote firewall policy change succeeded.
- A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
- A delivered notification email always means the remote endpoint was quarantined.
Explanation
Correct Answer
C:Verification depends on playbook trigger settings, event or incident match, enabled state and task execution history. This is why configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
Incorrect Answers
A:That generalization is incorrect in the context of playbook starter trigger versus task actions. The relevant behavior is a playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
B:That generalization is incorrect in the context of playbook starter trigger versus task actions. Check playbook trigger settings, event or incident match, enabled state and task execution history.
D:That generalization is incorrect in the context of playbook starter trigger versus task actions.
Question 824
A newly created playbook has three actions but none run because its event trigger never fires. An operator instead chooses this incorrect shortcut: Assume task names themselves create a trigger on every incoming log. Which consequence BEST explains the flaw in the proposed change?
- An accurate incident assignment caused the missing log source.
- Reviewing the playbook job result caused the original malicious event.
- The only effect is a cosmetic incident title change.
- A wrong or disabled starter trigger leaves downstream tasks idle.
Explanation
Correct Answer
D:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution. The intended preventive choice is configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
Incorrect Answers
A:An accurate incident assignment caused the missing log source. This does not account for the actual playbook starter trigger versus task actions weakness. The more relevant failure is a wrong or disabled starter trigger leaves downstream tasks idle. Confirm with playbook trigger settings, event or incident match, enabled state and task execution history.
B:Reviewing the playbook job result caused the original malicious event. This does not account for the actual playbook starter trigger versus task actions weakness. The more relevant failure is a wrong or disabled starter trigger leaves downstream tasks idle. Confirm with playbook trigger settings, event or incident match, enabled state and task execution history.
C:The only effect is a cosmetic incident title change. This does not account for the actual playbook starter trigger versus task actions weakness. The more relevant failure is a wrong or disabled starter trigger leaves downstream tasks idle. Confirm with playbook trigger settings, event or incident match, enabled state and task execution history.
Question 825
A newly created playbook has three actions but none run because its event trigger never fires. The observed fault is: A wrong or disabled starter trigger leaves downstream tasks idle. Which remediation best corrects the root cause?
- Leave a playbook disabled and treat its existence as active containment.
- Replace the incident trigger with a report page title.
- Correct the trigger, enable the tested playbook and verify a controlled execution.
- Assume task names themselves create a trigger on every incoming log.
Explanation
Correct Answer
C:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
Incorrect Answers
A:Leave a playbook disabled and treat its existence as active containment. A wrong or disabled starter trigger leaves downstream tasks idle. Instead, correct the trigger, enable the tested playbook and verify a controlled execution.
B:Replace the incident trigger with a report page title. A wrong or disabled starter trigger leaves downstream tasks idle. Instead, correct the trigger, enable the tested playbook and verify a controlled execution.
D:Assume task names themselves create a trigger on every incoming log. A wrong or disabled starter trigger leaves downstream tasks idle. Instead, correct the trigger, enable the tested playbook and verify a controlled execution.
Question 826
A SOC engineer expects an automation response whenever a monitored incident is created but selected the wrong trigger. Which FortiAnalyzer analyst action is most appropriate?
- For this FortiAnalyzer investigation, configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
- For this FortiAnalyzer investigation, leave a playbook disabled and treat its existence as active containment.
- For this FortiAnalyzer investigation, replace the incident trigger with a report page title.
- For this FortiAnalyzer investigation, assume task names themselves create a trigger on every incoming log.
Explanation
Correct Answer
A:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution. Verify using playbook trigger settings, event or incident match, enabled state and task execution history.
Incorrect Answers
B:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution. Relevant observations are playbook trigger settings, event or incident match, enabled state and task execution history.
C:Replace the incident trigger with a report page title. This leaves the operational requirement unresolved. A wrong or disabled starter trigger leaves downstream tasks idle. The supported correction is configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
D:Assume task names themselves create a trigger on every incoming log. A wrong or disabled starter trigger leaves downstream tasks idle. Use configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
Question 827
A SOC engineer expects an automation response whenever a monitored incident is created but selected the wrong trigger. Which collection of records directly tests the suspected mechanism?
- The supporting evidence is a severity label without source evidence and affected asset identity.
- The supporting evidence is an automation playbook name with no job history or target outcome.
- The supporting evidence is a connector icon without authorization or current API response.
- The supporting evidence is playbook trigger settings, event or incident match, enabled state and task execution history.
Explanation
Correct Answer
D:These observations directly test playbook starter trigger versus task actions under the actual system state. The planned operation is configure the supported starter trigger for the intended event or incident and connect task actions in a valid workflow.
Incorrect Answers
A:A severity label without source evidence and affected asset identity. The relevant evidence is playbook trigger settings, event or incident match, enabled state and task execution history. A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
B:An automation playbook name with no job history or target outcome. The relevant evidence is playbook trigger settings, event or incident match, enabled state and task execution history. A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
C:A connector icon without authorization or current API response. The relevant evidence is playbook trigger settings, event or incident match, enabled state and task execution history. A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
Question 828
A SOC engineer expects an automation response whenever a monitored incident is created but selected the wrong trigger. Which implementation principle supports the intended approach?
- The governing concept is that a delivered notification email always means the remote endpoint was quarantined.
- The governing concept is that a saved playbook without an eligible trigger automatically performs all tasks.
- The governing concept is that a connector listed in inventory always has valid permissions and network reachability.
- The governing concept is that a playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
Explanation
Correct Answer
D:Verification depends on playbook trigger settings, event or incident match, enabled state and task execution history.
Incorrect Answers
A:That generalization is incorrect in the context of playbook starter trigger versus task actions.
B:That generalization is incorrect in the context of playbook starter trigger versus task actions. A saved playbook without an eligible trigger automatically performs all tasks.
C:That generalization is incorrect in the context of playbook starter trigger versus task actions. A connector listed in inventory always has valid permissions and network reachability.
Question 829
A SOC engineer expects an automation response whenever a monitored incident is created but selected the wrong trigger. An operator instead chooses this incorrect shortcut: Assume task names themselves create a trigger on every incoming log. What technical weakness does this incorrect change introduce?
- The material failure is that the only effect is a cosmetic incident title change.
- The material failure is that an approved narrow connector scope caused every unrelated Internet outage.
- The material failure is that reviewing the playbook job result caused the original malicious event.
- The material failure is that a wrong or disabled starter trigger leaves downstream tasks idle.
Explanation
Correct Answer
D:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution.
Incorrect Answers
A:This does not account for the actual playbook starter trigger versus task actions weakness. The more relevant failure is a wrong or disabled starter trigger leaves downstream tasks idle.
B:This does not account for the actual playbook starter trigger versus task actions weakness. Confirm with playbook trigger settings, event or incident match, enabled state and task execution history.
C:This does not account for the actual playbook starter trigger versus task actions weakness.
Question 830
A SOC engineer expects an automation response whenever a monitored incident is created but selected the wrong trigger. The observed fault is: A wrong or disabled starter trigger leaves downstream tasks idle. What corrective action restores the target behavior with validation?
- The corrective action is to replace the incident trigger with a report page title.
- The corrective action is to assume task names themselves create a trigger on every incoming log.
- The corrective action is to correct the trigger, enable the tested playbook and verify a controlled execution.
- The corrective action is to leave a playbook disabled and treat its existence as active containment.
Explanation
Correct Answer
C:A playbook requires a starting condition and task graph; merely saving actions does not schedule execution. Recheck playbook trigger settings, event or incident match, enabled state and task execution history.
Incorrect Answers
A:Replace the incident trigger with a report page title. A wrong or disabled starter trigger leaves downstream tasks idle. Instead, correct the trigger, enable the tested playbook and verify a controlled execution.
B:Assume task names themselves create a trigger on every incoming log. A wrong or disabled starter trigger leaves downstream tasks idle. Instead, correct the trigger, enable the tested playbook and verify a controlled execution.
D:Leave a playbook disabled and treat its existence as active containment. A wrong or disabled starter trigger leaves downstream tasks idle. Instead, correct the trigger, enable the tested playbook and verify a controlled execution.
