CompTIA N10-009 Practice Test 18
Question 170
Network engineers repeatedly hand-edit switch configuration and cannot detect divergent production values. A colleague instead suggests: Store the latest live configuration only in individual engineers' shell history. Which finding MOST specifically explains why that suggestion is unsuitable?
- IaC establishes reproducible configuration and checks actual state against desired state.
- Automated onboarding extends templates with secure device identity and deployment controls.
- Pure routing cannot convert IPv6 addresses and packet headers into IPv4 sessions.
- Unversioned local changes cannot provide reliable audit and reproducibility.
Explanation
Correct Answer
D:Unversioned local changes cannot provide reliable audit and reproducibility. This flaw directly concerns the proposed action: Store the latest live configuration only in individual engineers' shell history.
Incorrect Answers
A:This explains why the recommended control works: Use version-controlled infrastructure-as-code templates, review and drift detection.
B:This rationale belongs to a later changed condition: The company wants a safe automated branch onboarding workflow.
C:This flaw concerns a different case in objective 1.8: An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses. The current rejected proposal is: Store the latest live configuration only in individual engineers' shell history.
Question 171
Network engineers repeatedly hand-edit switch configuration and cannot detect divergent production values. After applying the solution 'Use version-controlled infrastructure-as-code templates, review and drift detection.', which observation MOST directly proves that the requirement was met?
- A deliberately changed test setting is detected and reconciled to approved desired state.
- A test IPv6-only host reaches a known IPv4-only service through recorded translation.
- Approval is recorded for 'Use version-controlled infrastructure-as-code templates, review and drift detection.' but no operational validation is performed.
- Neighbor discovery succeeds within the link while remote routers do not forward link-local destinations.
Explanation
Correct Answer
A:A deliberately changed test setting is detected and reconciled to approved desired state. It tests the intended outcome because iac establishes reproducible configuration and checks actual state against desired state.
Incorrect Answers
B:This observation is for a different condition: An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses. It does not directly test the target outcome: Network engineers repeatedly hand-edit switch configuration and cannot detect divergent production values.
C:The missing direct test is: A deliberately changed test setting is detected and reconciled to approved desired state.
D:This test addresses a separate problem: A network uses IPv6 link-local addresses for neighbor discovery on the same VLAN and must identify their scope.
Question 172
The original case was: Network engineers repeatedly hand-edit switch configuration and cannot detect divergent production values. The requirement then changes: The company wants a safe automated branch onboarding workflow. Which revised action BEST meets this new condition?
- Use version-controlled infrastructure-as-code templates, review and drift detection.
- Store the latest live configuration only in individual engineers' shell history.
- Add validation, approval and zero-touch bootstrap to the IaC pipeline.
- A deliberately changed test setting is detected and reconciled to approved desired state.
Explanation
Correct Answer
C:Automated onboarding extends templates with secure device identity and deployment controls. The revised requirement is: The company wants a safe automated branch onboarding workflow. The appropriate action is: Add validation, approval and zero-touch bootstrap to the IaC pipeline.
Incorrect Answers
A:This is the original control. IaC establishes reproducible configuration and checks actual state against desired state. It does not directly satisfy the revised requirement: The company wants a safe automated branch onboarding workflow.
B:Unversioned local changes cannot provide reliable audit and reproducibility. It remains inappropriate in the revised context.
D:A deliberately changed test setting is detected and reconciled to approved desired state. The current requirement is: The company wants a safe automated branch onboarding workflow.
Question 173
New IPv6 services must communicate with existing IPv4-only services during a gradual enterprise migration. Which action MOST directly meets the stated networking requirement?
- Deploy appropriate DNS64/NAT64 translation with tested application compatibility.
- Use fe80::/10 addresses with appropriate interface scope identifiers where needed.
- Disable all IPv4 connectivity before verifying application IPv6 support.
- Plan dual-stack coexistence and gateway compatibility per application.
Explanation
Correct Answer
D:Dual-stack hosts can use either address family where applications and routes support it. This specifically resolves: New IPv6 services must communicate with existing IPv4-only services during a gradual enterprise migration.
Incorrect Answers
A:This action responds to a later condition: IPv6-only clients must contact legacy IPv4-only internet endpoints. NAT64 enables selected IPv6-to-IPv4 traffic where direct dual-stack is unavailable.
B:This addresses another problem in objective 1.8: A network uses IPv6 link-local addresses for neighbor discovery on the same VLAN and must identify their scope.
C:Premature removal breaks IPv4-only dependencies. The suggested approach is: Disable all IPv4 connectivity before verifying application IPv6 support.
Question 174
New IPv6 services must communicate with existing IPv4-only services during a gradual enterprise migration. A colleague instead suggests: Disable all IPv4 connectivity before verifying application IPv6 support. Which finding MOST specifically explains why that suggestion is unsuitable?
- Dual-stack hosts can use either address family where applications and routes support it.
- NAT64 enables selected IPv6-to-IPv4 traffic where direct dual-stack is unavailable.
- Link-local addressing is not routable between networks and requires local scope.
- Premature removal breaks IPv4-only dependencies.
Explanation
Correct Answer
D:Premature removal breaks IPv4-only dependencies. This flaw directly concerns the proposed action: Disable all IPv4 connectivity before verifying application IPv6 support.
Incorrect Answers
A:This explains why the recommended control works: Plan dual-stack coexistence and gateway compatibility per application.
B:This rationale belongs to a later changed condition: IPv6-only clients must contact legacy IPv4-only internet endpoints.
C:This flaw concerns a different case in objective 1.8: A network uses IPv6 link-local addresses for neighbor discovery on the same VLAN and must identify their scope. The current rejected proposal is: Disable all IPv4 connectivity before verifying application IPv6 support.
Question 175
New IPv6 services must communicate with existing IPv4-only services during a gradual enterprise migration. Which TWO entries together specify the appropriate corrective measure AND the strongest direct evidence that it works? (Select TWO.)
- Disable all IPv4 connectivity before verifying application IPv6 support.
- End-to-end test sessions succeed over IPv4 and IPv6 with distinct routing verification.
- Use fe80::/10 addresses with appropriate interface scope identifiers where needed.
- Plan dual-stack coexistence and gateway compatibility per application.
- Deploy appropriate DNS64/NAT64 translation with tested application compatibility.
Explanation
Correct Answers
B:Correct verification. End-to-end test sessions succeed over IPv4 and IPv6 with distinct routing verification. This demonstrates the outcome expected from: Plan dual-stack coexistence and gateway compatibility per application.
D:Correct control. Dual-stack hosts can use either address family where applications and routes support it. It addresses the present requirement: New IPv6 services must communicate with existing IPv4-only services during a gradual enterprise migration.
Incorrect Answers
A:Incorrect control. Premature removal breaks IPv4-only dependencies. The inappropriate proposal is: Disable all IPv4 connectivity before verifying application IPv6 support.
C:This control fits another scenario in objective 1.8: A network uses IPv6 link-local addresses for neighbor discovery on the same VLAN and must identify their scope. It does not directly verify or implement the present issue.
E:This is a response to a different later requirement: IPv6-only clients must contact legacy IPv4-only internet endpoints. NAT64 enables selected IPv6-to-IPv4 traffic where direct dual-stack is unavailable. It is not the original control-and-evidence pair.
Question 176
The original case was: New IPv6 services must communicate with existing IPv4-only services during a gradual enterprise migration. The requirement then changes: IPv6-only clients must contact legacy IPv4-only internet endpoints. Which revised action BEST meets this new condition?
- Deploy appropriate DNS64/NAT64 translation with tested application compatibility.
- End-to-end test sessions succeed over IPv4 and IPv6 with distinct routing verification.
- Disable all IPv4 connectivity before verifying application IPv6 support.
- Plan dual-stack coexistence and gateway compatibility per application.
Explanation
Correct Answer
A:NAT64 enables selected IPv6-to-IPv4 traffic where direct dual-stack is unavailable. The revised requirement is: IPv6-only clients must contact legacy IPv4-only internet endpoints. The appropriate action is: Deploy appropriate DNS64/NAT64 translation with tested application compatibility.
Incorrect Answers
B:End-to-end test sessions succeed over IPv4 and IPv6 with distinct routing verification. The current requirement is: IPv6-only clients must contact legacy IPv4-only internet endpoints.
C:This action was already unsuitable. Premature removal breaks IPv4-only dependencies. It remains inappropriate in the revised context.
D:This is the original control. Dual-stack hosts can use either address family where applications and routes support it. It does not directly satisfy the revised requirement: IPv6-only clients must contact legacy IPv4-only internet endpoints.
Question 177
An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses. Which action MOST directly meets the stated networking requirement?
- Prefer native IPv6 connectivity and DNS records where both ends support it.
- Assume ordinary IPv6 routers translate between IP versions automatically.
- Apply policy-based SD-WAN with application-aware path selection and monitored transport health.
- Implement DNS64/NAT64 service with correct IPv6 routing and translation policies.
Explanation
Correct Answer
D:Translation enables IPv6-only clients to reach IPv4 servers for supported traffic. This specifically resolves: An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses.
Incorrect Answers
A:This action responds to a later condition: The external application becomes dual-stack capable. Direct IPv6 removes the need for translation when available.
B:Pure routing cannot convert IPv6 addresses and packet headers into IPv4 sessions. The suggested approach is: Assume ordinary IPv6 routers translate between IP versions automatically.
C:This addresses another problem in objective 1.8: A multinational runs MPLS and internet links and wants applications to choose paths by SLA rather than fixed interface priority.
Question 178
An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses. A colleague instead suggests: Assume ordinary IPv6 routers translate between IP versions automatically. Which finding MOST specifically explains why that suggestion is unsuitable?
- Static single-path binding ignores application performance and link health.
- Direct IPv6 removes the need for translation when available.
- Translation enables IPv6-only clients to reach IPv4 servers for supported traffic.
- Pure routing cannot convert IPv6 addresses and packet headers into IPv4 sessions.
Explanation
Correct Answer
D:Pure routing cannot convert IPv6 addresses and packet headers into IPv4 sessions. This flaw directly concerns the proposed action: Assume ordinary IPv6 routers translate between IP versions automatically.
Incorrect Answers
A:This flaw concerns a different case in objective 1.8: A multinational runs MPLS and internet links and wants applications to choose paths by SLA rather than fixed interface priority. The current rejected proposal is: Assume ordinary IPv6 routers translate between IP versions automatically.
B:This rationale belongs to a later changed condition: The external application becomes dual-stack capable.
C:This explains why the recommended control works: Implement DNS64/NAT64 service with correct IPv6 routing and translation policies.
Question 179
An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses. After applying the solution 'Implement DNS64/NAT64 service with correct IPv6 routing and translation policies.', which observation MOST directly proves that the requirement was met?
- Approval is recorded for 'Implement DNS64/NAT64 service with correct IPv6 routing and translation policies.' but no operational validation is performed.
- A test IPv6-only host reaches a known IPv4-only service through recorded translation.
- Packet captures identify VXLAN encapsulation and tenant traffic remains isolated.
- Controlled impairment causes affected traffic to shift to a policy-approved healthy transport.
Explanation
Correct Answer
B:A test IPv6-only host reaches a known IPv4-only service through recorded translation. It tests the intended outcome because translation enables ipv6-only clients to reach ipv4 servers for supported traffic.
Incorrect Answers
A:The missing direct test is: A test IPv6-only host reaches a known IPv4-only service through recorded translation.
C:This test addresses a separate problem: A multi-tenant datacenter must extend isolated Layer 2 segments across an IP underlay for many tenant networks.
D:This observation is for a different condition: A multinational runs MPLS and internet links and wants applications to choose paths by SLA rather than fixed interface priority. It does not directly test the target outcome: An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses.
Question 180
The original case was: An IPv6-only application subnet must reach existing IPv4-only external destinations without IPv4 client addresses. The requirement then changes: The external application becomes dual-stack capable. Which revised action BEST meets this new condition?
- Assume ordinary IPv6 routers translate between IP versions automatically.
- Prefer native IPv6 connectivity and DNS records where both ends support it.
- Implement DNS64/NAT64 service with correct IPv6 routing and translation policies.
- A test IPv6-only host reaches a known IPv4-only service through recorded translation.
Explanation
Correct Answer
B:Direct IPv6 removes the need for translation when available. The revised requirement is: The external application becomes dual-stack capable. The appropriate action is: Prefer native IPv6 connectivity and DNS records where both ends support it.
Incorrect Answers
A:Pure routing cannot convert IPv6 addresses and packet headers into IPv4 sessions. It remains inappropriate in the revised context.
C:This is the original control. Translation enables IPv6-only clients to reach IPv4 servers for supported traffic. It does not directly satisfy the revised requirement: The external application becomes dual-stack capable.
D:A test IPv6-only host reaches a known IPv4-only service through recorded translation. The current requirement is: The external application becomes dual-stack capable.