Cisco 700-805 Practice Test 50
Question 490
In the lead-up to a customer decision, Summit Manufacturing reports: an RM sees duplicate devices in Cisco Ready for Partners after a site transfer. Risk diagnosis: Which piece of evidence would most directly support diagnosis of the specific blocker?
- Partner dashboard and customer coverage evidence show different end dates
- Identical serial appears in both the old and new location records
- Hardware and software entitlements are represented by different service relationships
- Uncovered-asset list has no owner or severity segmentation
Explanation
Correct Answer
B:This is the discriminating account evidence: Identical serial appears in both the old and new location records. It directly supports the case description, while the suitable response is to reconcile serial, site and ownership relationships before proposing renewal quantities. Check the underlying customer and contract records before committing the renewal.
Incorrect Answers
A:This is meaningful in a different renewal investigation, but it does not establish the specific blocker in the prompt. The discriminating evidence is 'Identical serial appears in both the old and new location records', not this unrelated symptom.
C:This evidence points toward another case: cisco Ready for Partners highlights a hardware service gap but customer says it purchased separate software support. For the named account, the relevant observation is 'Identical serial appears in both the old and new location records', which tests the issue described.
D:That signal would help if the renewal team wants to prioritize gaps visible in Cisco Ready for Partners. The present case instead calls for verifying 'Identical serial appears in both the old and new location records' before choosing a remedy.
Question 491
For a renewal program review, Summit Manufacturing reports: an RM sees duplicate devices in Cisco Ready for Partners after a site transfer. Acceptance test: What is the strongest case-specific evidence that the remedy succeeded?
- Highest-risk eligible gaps have accountable plans and customer contact
- The reconciled service status is supported by matching identifiers and dates
- Verified devices appear under correct site ownership without double counting
- Offer addresses only the verified uncovered service scope
Explanation
Correct Answer
C:This demonstrates a completed remedy: Verified devices appear under correct site ownership without double counting. It closes the loop from the observed issue through the action 'Reconcile serial, site and ownership relationships before proposing renewal quantities' to an observable, accountable result; mere activity or an emailed proposal would not be enough.
Incorrect Answers
A:That outcome can matter when the renewal team wants to prioritize gaps visible in Cisco Ready for Partners, but it does not verify the remedy required by this case. The necessary acceptance evidence is 'Verified devices appear under correct site ownership without double counting'.
B:The offered result tests another workstream and could give false confidence about the named obstacle. Successful closure here needs 'Verified devices appear under correct site ownership without double counting', tied to the account's actual risk.
D:This measure would show improvement for a different situation: cisco Ready for Partners highlights a hardware service gap but customer says it purchased separate software support. It would not prove the main account's issue was corrected; check 'Verified devices appear under correct site ownership without double counting' instead.
Question 492
During the account team's readiness meeting, Summit Manufacturing reports: an RM sees duplicate devices in Cisco Ready for Partners after a site transfer. Long-term prevention: Which ongoing control would most directly reduce recurrence of this failure?
- Validate coverage type and service relationship before flagging churn
- Maintain a coverage-gap triage queue with evidence and owners
- Record exception resolution and source-of-truth updates
- Include site moves in periodic installed-base cleanup
Explanation
Correct Answer
D:This control is matched to the known failure mode: Include site moves in periodic installed-base cleanup. Repeating this check catches the signal 'Identical serial appears in both the old and new location records' earlier and makes the correct handoff or intervention reliable beyond a single deal.
Incorrect Answers
A:That cadence controls a different process associated with cisco Ready for Partners highlights a hardware service gap but customer says it purchased separate software support. Preventing the described recurrence requires 'Include site moves in periodic installed-base cleanup'.
B:While useful for the renewal team wants to prioritize gaps visible in Cisco Ready for Partners, it would not consistently detect this case's signal. Establish 'Include site moves in periodic installed-base cleanup' instead.
C:A generic control is not enough when the failure mode is specific. This option tracks another risk; the focused prevention step here is 'Include site moves in periodic installed-base cleanup'.
Question 493
In the lead-up to a customer decision, Willow Manufacturing reports: a renewal manager cannot determine which contract includes a newly acquired customer's devices. Recommended response: What should the renewals manager or coordinating team do first?
- Use install-base relationship data to map assets to the authorized contracts
- Coordinate account ownership correction and refresh the partner visibility
- Investigate the uncovered assets and validate service attach opportunities
- Reconcile serial, site and ownership relationships before proposing renewal quantities
Explanation
Correct Answer
A:This addresses the specific obstacle: a renewal manager cannot determine which contract includes a newly acquired customer's devices. The supporting sign is that acquired asset records lack clear end-customer and contract association. The action therefore targets the account's immediate renewal dependency rather than unrelated housekeeping.
Incorrect Answers
B:That work would mainly address a different condition: a region's install-base records are incomplete because sales representatives used an old partner account. Here the observed problem is a renewal manager cannot determine which contract includes a newly acquired customer's devices, requiring the targeted action 'Use install-base relationship data to map assets to the authorized contracts'.
C:This is a plausible renewal task when the coverage view flags active inventory with no matching support entitlement, but that is not the deciding fact given here. The direct remedy in this account is 'Use install-base relationship data to map assets to the authorized contracts'.
D:The suggestion may support another customer facing an RM sees duplicate devices in Cisco Ready for Partners after a site transfer; it leaves this account's specific blocker untouched. Use 'Use install-base relationship data to map assets to the authorized contracts' to address the documented signal.
Question 494
For a renewal program review, Willow Manufacturing reports: a renewal manager cannot determine which contract includes a newly acquired customer's devices. Risk diagnosis: Which piece of evidence would most directly support diagnosis of the specific blocker?
- Identical serial appears in both the old and new location records
- Acquired asset records lack clear end-customer and contract association
- Asset lines are present under a previous partner holding record
- The coverage view flags active inventory with no matching support entitlement
Explanation
Correct Answer
B:This is the discriminating account evidence: Acquired asset records lack clear end-customer and contract association. It directly supports the case description, while the suitable response is to use install-base relationship data to map assets to the authorized contracts. Check the underlying customer and contract records before committing the renewal.
Incorrect Answers
A:This is meaningful in a different renewal investigation, but it does not establish the specific blocker in the prompt. The discriminating evidence is 'Acquired asset records lack clear end-customer and contract association', not this unrelated symptom.
C:This evidence points toward another case: a region's install-base records are incomplete because sales representatives used an old partner account. For the named account, the relevant observation is 'Acquired asset records lack clear end-customer and contract association', which tests the issue described.
D:That signal would help if cisco Ready for Partners shows a group of active devices without support coverage. The present case instead calls for verifying 'Acquired asset records lack clear end-customer and contract association' before choosing a remedy.
Question 495
During the account team's readiness meeting, Willow Manufacturing reports: a renewal manager cannot determine which contract includes a newly acquired customer's devices. Acceptance test: What is the strongest case-specific evidence that the remedy succeeded?
- Eligible devices have documented attach decisions or corrected entitlement records
- Verified devices appear under correct site ownership without double counting
- The service quotation references verified current asset ownership
- Partner-facing view shows authorized assets under the correct identity
Explanation
Correct Answer
C:This demonstrates a completed remedy: The service quotation references verified current asset ownership. It closes the loop from the observed issue through the action 'Use install-base relationship data to map assets to the authorized contracts' to an observable, accountable result; mere activity or an emailed proposal would not be enough.
Incorrect Answers
A:That outcome can matter when cisco Ready for Partners shows a group of active devices without support coverage, but it does not verify the remedy required by this case. The necessary acceptance evidence is 'The service quotation references verified current asset ownership'.
B:The offered result tests another workstream and could give false confidence about the named obstacle. Successful closure here needs 'The service quotation references verified current asset ownership', tied to the account's actual risk.
D:This measure would show improvement for a different situation: a region's install-base records are incomplete because sales representatives used an old partner account. It would not prove the main account's issue was corrected; check 'The service quotation references verified current asset ownership' instead.
Question 496
Before the next commercial milestone, Willow Manufacturing reports: a renewal manager cannot determine which contract includes a newly acquired customer's devices. Long-term prevention: Which ongoing control would most directly reduce recurrence of this failure?
- Review partner association exceptions after territory changes
- Review uncovered-asset exceptions on a scheduled cadence
- Include site moves in periodic installed-base cleanup
- Document acquisition-related record validation steps
Explanation
Correct Answer
D:This control is matched to the known failure mode: Document acquisition-related record validation steps. Repeating this check catches the signal 'Acquired asset records lack clear end-customer and contract association' earlier and makes the correct handoff or intervention reliable beyond a single deal.
Incorrect Answers
A:That cadence controls a different process associated with a region's install-base records are incomplete because sales representatives used an old partner account. Preventing the described recurrence requires 'Document acquisition-related record validation steps'.
B:While useful for cisco Ready for Partners shows a group of active devices without support coverage, it would not consistently detect this case's signal. Establish 'Document acquisition-related record validation steps' instead.
C:A generic control is not enough when the failure mode is specific. This option tracks another risk; the focused prevention step here is 'Document acquisition-related record validation steps'.
Question 497
For a renewal program review, Windward Manufacturing reports: a service attach campaign targets devices nearing support expiry. Recommended response: What should the renewals manager or coordinating team do first?
- Segment valid expiring coverage and coordinate eligible attach conversations
- Rank gaps by verified expiry, customer criticality and coverage impact
- Cross-check asset identifiers and contract dates with the customer before quoting
- Use install-base relationship data to map assets to the authorized contracts
Explanation
Correct Answer
A:This addresses the specific obstacle: a service attach campaign targets devices nearing support expiry. The supporting sign is that a group of assets shows imminent or recently missed coverage dates. The action therefore targets the account's immediate renewal dependency rather than unrelated housekeeping.
Incorrect Answers
B:That work would mainly address a different condition: the renewal team wants to prioritize gaps visible in Cisco Ready for Partners. Here the observed problem is a service attach campaign targets devices nearing support expiry, requiring the targeted action 'Segment valid expiring coverage and coordinate eligible attach conversations'.
C:This is a plausible renewal task when partner dashboard and customer coverage evidence show different end dates, but that is not the deciding fact given here. The direct remedy in this account is 'Segment valid expiring coverage and coordinate eligible attach conversations'.
D:The suggestion may support another customer facing a renewal manager cannot determine which contract includes a newly acquired customer's devices; it leaves this account's specific blocker untouched. Use 'Segment valid expiring coverage and coordinate eligible attach conversations' to address the documented signal.
Question 498
During the account team's readiness meeting, Windward Manufacturing reports: a service attach campaign targets devices nearing support expiry. Risk diagnosis: Which piece of evidence would most directly support diagnosis of the specific blocker?
- Acquired asset records lack clear end-customer and contract association
- A group of assets shows imminent or recently missed coverage dates
- Uncovered-asset list has no owner or severity segmentation
- Partner dashboard and customer coverage evidence show different end dates
Explanation
Correct Answer
B:This is the discriminating account evidence: A group of assets shows imminent or recently missed coverage dates. It directly supports the case description, while the suitable response is to segment valid expiring coverage and coordinate eligible attach conversations. Check the underlying customer and contract records before committing the renewal.
Incorrect Answers
A:This is meaningful in a different renewal investigation, but it does not establish the specific blocker in the prompt. The discriminating evidence is 'A group of assets shows imminent or recently missed coverage dates', not this unrelated symptom.
C:This evidence points toward another case: the renewal team wants to prioritize gaps visible in Cisco Ready for Partners. For the named account, the relevant observation is 'A group of assets shows imminent or recently missed coverage dates', which tests the issue described.
D:That signal would help if a customer disputes a coverage gap found in the partner install-base dashboard. The present case instead calls for verifying 'A group of assets shows imminent or recently missed coverage dates' before choosing a remedy.
Question 499
Before the next commercial milestone, Windward Manufacturing reports: a service attach campaign targets devices nearing support expiry. Acceptance test: What is the strongest case-specific evidence that the remedy succeeded?
- The reconciled service status is supported by matching identifiers and dates
- The service quotation references verified current asset ownership
- Campaign contacts correspond to verified product and expiry data
- Highest-risk eligible gaps have accountable plans and customer contact
Explanation
Correct Answer
C:This demonstrates a completed remedy: Campaign contacts correspond to verified product and expiry data. It closes the loop from the observed issue through the action 'Segment valid expiring coverage and coordinate eligible attach conversations' to an observable, accountable result; mere activity or an emailed proposal would not be enough.
Incorrect Answers
A:That outcome can matter when a customer disputes a coverage gap found in the partner install-base dashboard, but it does not verify the remedy required by this case. The necessary acceptance evidence is 'Campaign contacts correspond to verified product and expiry data'.
B:The offered result tests another workstream and could give false confidence about the named obstacle. Successful closure here needs 'Campaign contacts correspond to verified product and expiry data', tied to the account's actual risk.
D:This measure would show improvement for a different situation: the renewal team wants to prioritize gaps visible in Cisco Ready for Partners. It would not prove the main account's issue was corrected; check 'Campaign contacts correspond to verified product and expiry data' instead.
Question 500
While auditing the partner renewal pipeline, Windward Manufacturing reports: a service attach campaign targets devices nearing support expiry. Long-term prevention: Which ongoing control would most directly reduce recurrence of this failure?
- Maintain a coverage-gap triage queue with evidence and owners
- Record exception resolution and source-of-truth updates
- Document acquisition-related record validation steps
- Refresh coverage lists before each outreach wave
Explanation
Correct Answer
D:This control is matched to the known failure mode: Refresh coverage lists before each outreach wave. Repeating this check catches the signal 'A group of assets shows imminent or recently missed coverage dates' earlier and makes the correct handoff or intervention reliable beyond a single deal.
Incorrect Answers
A:That cadence controls a different process associated with the renewal team wants to prioritize gaps visible in Cisco Ready for Partners. Preventing the described recurrence requires 'Refresh coverage lists before each outreach wave'.
B:While useful for a customer disputes a coverage gap found in the partner install-base dashboard, it would not consistently detect this case's signal. Establish 'Refresh coverage lists before each outreach wave' instead.
C:A generic control is not enough when the failure mode is specific. This option tracks another risk; the focused prevention step here is 'Refresh coverage lists before each outreach wave'.