Cisco 700-805 Practice Test 38
Question 370
While auditing the partner renewal pipeline, Aster Manufacturing reports: a device's serial is valid but the renewal record is assigned to the wrong end customer. Long-term prevention: Which ongoing control would most directly reduce recurrence of this failure?
- Review install-base changes after major architecture migrations
- Audit customer-asset associations before commercial release
- Reconcile retirement and refresh events against the install base
- Validate ownership changes during mergers and divestitures
Explanation
Correct Answer
B:This control is matched to the known failure mode: Audit customer-asset associations before commercial release. Repeating this check catches the signal 'Serial history and customer identifier point to different organizations' earlier and makes the correct handoff or intervention reliable beyond a single deal.
Incorrect Answers
A:A generic control is not enough when the failure mode is specific. This option tracks another risk; the focused prevention step here is 'Audit customer-asset associations before commercial release'.
C:That cadence controls a different process associated with the install base lists retired switches as active support items. Preventing the described recurrence requires 'Audit customer-asset associations before commercial release'.
D:While useful for a subsidiary was sold but its old devices remain under the parent contract, it would not consistently detect this case's signal. Establish 'Audit customer-asset associations before commercial release' instead.
Question 371
In a discussion with the RM and CSM, Aster Manufacturing reports: a device's serial is valid but the renewal record is assigned to the wrong end customer. Failure mode: Which proposed shortcut most directly contradicts the corrective approach required here?
- Reconcile legal ownership and contract association before quoting
- Validate relevant new entitlement and service relationships before quoting
- Override customer identity in a quote without checking source records
- Validate serial lifecycle status before using those assets for renewal quantities
Explanation
Correct Answer
C:This is the shortcut to avoid: Override customer identity in a quote without checking source records. It disregards the account-specific signal 'Serial history and customer identifier point to different organizations', leaving the risk unresolved rather than completing the corrective action 'Correct end-customer attribution with the authorized data owner'.
Incorrect Answers
A:The option may be reasonable for another blocker, but it does not describe the shortcut this prompt asks you to identify. This case's specific unsafe move is 'Override customer identity in a quote without checking source records'.
B:This is an intervention used for another legitimate situation, not the action that would undermine this account. Here avoid 'Override customer identity in a quote without checking source records', because the case requires 'Correct end-customer attribution with the authorized data owner'.
D:That is a constructive step for a different customer, especially when the install base lists retired switches as active support items. It is not the damaging shortcut in this case. The conflicting move here is 'Override customer identity in a quote without checking source records'.
Question 372
At a cross-functional renewal checkpoint, Aster Manufacturing reports: a device's serial is valid but the renewal record is assigned to the wrong end customer. Execution handoff: Which correction-then-verification sequence matches this renewal's immediate dependency?
- First validate serial lifecycle status before using those assets for renewal quantities; then verify that quoted assets correspond to the customer's active authorized inventory
- First reconcile legal ownership and contract association before quoting; then verify that renewal line ownership matches the current contracting organizations
- First validate relevant new entitlement and service relationships before quoting; then verify that coverage and quantities match the current licensed environment
- First correct end-customer attribution with the authorized data owner; then verify that contract, entitlement and named customer agree on asset ownership
Explanation
Correct Answer
D:Both steps are necessary in order: Correct end-customer attribution with the authorized data owner; then check that contract, entitlement and named customer agree on asset ownership. The first step corrects the identified issue, while the second establishes evidence of completion before treating the renewal as ready.
Incorrect Answers
A:This sequence belongs to a different case: the install base lists retired switches as active support items. It omits the action 'Correct end-customer attribution with the authorized data owner' and its acceptance condition 'Contract, entitlement and named customer agree on asset ownership'.
B:The paired steps would check another customer's renewal dependency. They do not resolve the issue described; here first 'Correct end-customer attribution with the authorized data owner', and then establish 'Contract, entitlement and named customer agree on asset ownership'.
C:Handoff sequencing is only useful when it follows the account's actual facts. This route addresses another signal, while this case needs 'Correct end-customer attribution with the authorized data owner' followed by verification that 'Contract, entitlement and named customer agree on asset ownership'.
Question 373
During the account team's readiness meeting, Bluebird Manufacturing reports: a customer reports a new branch with equipment absent from the partner's inventory. Recommended response: What should the renewals manager or coordinating team do first?
- Collect branch assets and validate support eligibility before pricing
- Investigate uncovered assets and ownership before building the quote
- Deduplicate records using verified identifiers and coverage relationships
- Correct end-customer attribution with the authorized data owner
Explanation
Correct Answer
A:This addresses the specific obstacle: a customer reports a new branch with equipment absent from the partner's inventory. The supporting sign is that field deployment report has serials not present in the install base. The action therefore targets the account's immediate renewal dependency rather than unrelated housekeeping.
Incorrect Answers
B:That work would mainly address a different condition: a customer has active appliances missing from the service entitlement export. Here the observed problem is a customer reports a new branch with equipment absent from the partner's inventory, requiring the targeted action 'Collect branch assets and validate support eligibility before pricing'.
C:This is a plausible renewal task when the same hardware identifier appears twice with conflicting site tags, but that is not the deciding fact given here. The direct remedy in this account is 'Collect branch assets and validate support eligibility before pricing'.
D:The suggestion may support another customer facing a device's serial is valid but the renewal record is assigned to the wrong end customer; it leaves this account's specific blocker untouched. Use 'Collect branch assets and validate support eligibility before pricing' to address the documented signal.
Question 374
Before the next commercial milestone, Bluebird Manufacturing reports: a customer reports a new branch with equipment absent from the partner's inventory. Risk diagnosis: Which piece of evidence would most directly support diagnosis of the specific blocker?
- Serial history and customer identifier point to different organizations
- Field deployment report has serials not present in the install base
- Active serials exist in field records but have no matching coverage
- The same hardware identifier appears twice with conflicting site tags
Explanation
Correct Answer
B:This is the discriminating account evidence: Field deployment report has serials not present in the install base. It directly supports the case description, while the suitable response is to collect branch assets and validate support eligibility before pricing. Check the underlying customer and contract records before committing the renewal.
Incorrect Answers
A:This is meaningful in a different renewal investigation, but it does not establish the specific blocker in the prompt. The discriminating evidence is 'Field deployment report has serials not present in the install base', not this unrelated symptom.
C:This evidence points toward another case: a customer has active appliances missing from the service entitlement export. For the named account, the relevant observation is 'Field deployment report has serials not present in the install base', which tests the issue described.
D:That signal would help if a renewal report includes duplicate serials under two site names. The present case instead calls for verifying 'Field deployment report has serials not present in the install base' before choosing a remedy.
Question 375
While auditing the partner renewal pipeline, Bluebird Manufacturing reports: a customer reports a new branch with equipment absent from the partner's inventory. Acceptance test: What is the strongest case-specific evidence that the remedy succeeded?
- Each eligible asset is represented once in the quoted scope
- Contract, entitlement and named customer agree on asset ownership
- New eligible branch assets are accounted for in an approved scope
- The renewal scope accounts for eligible uncovered devices or an explicit decision
Explanation
Correct Answer
C:This demonstrates a completed remedy: New eligible branch assets are accounted for in an approved scope. It closes the loop from the observed issue through the action 'Collect branch assets and validate support eligibility before pricing' to an observable, accountable result; mere activity or an emailed proposal would not be enough.
Incorrect Answers
A:That outcome can matter when a renewal report includes duplicate serials under two site names, but it does not verify the remedy required by this case. The necessary acceptance evidence is 'New eligible branch assets are accounted for in an approved scope'.
B:The offered result tests another workstream and could give false confidence about the named obstacle. Successful closure here needs 'New eligible branch assets are accounted for in an approved scope', tied to the account's actual risk.
D:This measure would show improvement for a different situation: a customer has active appliances missing from the service entitlement export. It would not prove the main account's issue was corrected; check 'New eligible branch assets are accounted for in an approved scope' instead.
Question 376
In a discussion with the RM and CSM, Bluebird Manufacturing reports: a customer reports a new branch with equipment absent from the partner's inventory. Long-term prevention: Which ongoing control would most directly reduce recurrence of this failure?
- Compare operational inventory and coverage records periodically
- Run duplicate-identifier checks before renewal forecasting
- Audit customer-asset associations before commercial release
- Add new sites to the asset reconciliation cadence
Explanation
Correct Answer
D:This control is matched to the known failure mode: Add new sites to the asset reconciliation cadence. Repeating this check catches the signal 'Field deployment report has serials not present in the install base' earlier and makes the correct handoff or intervention reliable beyond a single deal.
Incorrect Answers
A:That cadence controls a different process associated with a customer has active appliances missing from the service entitlement export. Preventing the described recurrence requires 'Add new sites to the asset reconciliation cadence'.
B:While useful for a renewal report includes duplicate serials under two site names, it would not consistently detect this case's signal. Establish 'Add new sites to the asset reconciliation cadence' instead.
C:A generic control is not enough when the failure mode is specific. This option tracks another risk; the focused prevention step here is 'Add new sites to the asset reconciliation cadence'.
Question 377
At a cross-functional renewal checkpoint, Bluebird Manufacturing reports: a customer reports a new branch with equipment absent from the partner's inventory. Failure mode: Which proposed shortcut most directly contradicts the corrective approach required here?
- Price by last year's branch count alone
- Investigate uncovered assets and ownership before building the quote
- Deduplicate records using verified identifiers and coverage relationships
- Correct end-customer attribution with the authorized data owner
Explanation
Correct Answer
A:This is the shortcut to avoid: Price by last year's branch count alone. It disregards the account-specific signal 'Field deployment report has serials not present in the install base', leaving the risk unresolved rather than completing the corrective action 'Collect branch assets and validate support eligibility before pricing'.
Incorrect Answers
B:That is a constructive step for a different customer, especially when a customer has active appliances missing from the service entitlement export. It is not the damaging shortcut in this case. The conflicting move here is 'Price by last year's branch count alone'.
C:The option may be reasonable for another blocker, but it does not describe the shortcut this prompt asks you to identify. This case's specific unsafe move is 'Price by last year's branch count alone'.
D:This is an intervention used for another legitimate situation, not the action that would undermine this account. Here avoid 'Price by last year's branch count alone', because the case requires 'Collect branch assets and validate support eligibility before pricing'.
Question 378
During a subscription portfolio review, Bluebird Manufacturing reports: a customer reports a new branch with equipment absent from the partner's inventory. Execution handoff: Which correction-then-verification sequence matches this renewal's immediate dependency?
- First correct end-customer attribution with the authorized data owner; then verify that contract, entitlement and named customer agree on asset ownership
- First collect branch assets and validate support eligibility before pricing; then verify that new eligible branch assets are accounted for in an approved scope
- First investigate uncovered assets and ownership before building the quote; then verify that the renewal scope accounts for eligible uncovered devices or an explicit decision
- First deduplicate records using verified identifiers and coverage relationships; then verify that each eligible asset is represented once in the quoted scope
Explanation
Correct Answer
B:Both steps are necessary in order: Collect branch assets and validate support eligibility before pricing; then check that new eligible branch assets are accounted for in an approved scope. The first step corrects the identified issue, while the second establishes evidence of completion before treating the renewal as ready.
Incorrect Answers
A:Handoff sequencing is only useful when it follows the account's actual facts. This route addresses another signal, while this case needs 'Collect branch assets and validate support eligibility before pricing' followed by verification that 'New eligible branch assets are accounted for in an approved scope'.
C:This sequence belongs to a different case: a customer has active appliances missing from the service entitlement export. It omits the action 'Collect branch assets and validate support eligibility before pricing' and its acceptance condition 'New eligible branch assets are accounted for in an approved scope'.
D:The paired steps would check another customer's renewal dependency. They do not resolve the issue described; here first 'Collect branch assets and validate support eligibility before pricing', and then establish 'New eligible branch assets are accounted for in an approved scope'.
Question 379
Before the next commercial milestone, Cedar Manufacturing reports: the renewal quote includes support lines whose end dates fall before the subscription period. Recommended response: What should the renewals manager or coordinating team do first?
- Validate relevant new entitlement and service relationships before quoting
- Collect branch assets and validate support eligibility before pricing
- Reconcile coverage dates and renewal term assumptions first
- Reconcile legal ownership and contract association before quoting
Explanation
Correct Answer
C:This addresses the specific obstacle: the renewal quote includes support lines whose end dates fall before the subscription period. The supporting sign is that line-level entitlement dates differ from the proposed service term. The action therefore targets the account's immediate renewal dependency rather than unrelated housekeeping.
Incorrect Answers
A:This is a plausible renewal task when older hardware-only coverage appears despite changed deployment model, but that is not the deciding fact given here. The direct remedy in this account is 'Reconcile coverage dates and renewal term assumptions first'.
B:The suggestion may support another customer facing a customer reports a new branch with equipment absent from the partner's inventory; it leaves this account's specific blocker untouched. Use 'Reconcile coverage dates and renewal term assumptions first' to address the documented signal.
D:That work would mainly address a different condition: a subsidiary was sold but its old devices remain under the parent contract. Here the observed problem is the renewal quote includes support lines whose end dates fall before the subscription period, requiring the targeted action 'Reconcile coverage dates and renewal term assumptions first'.
Question 380
While auditing the partner renewal pipeline, Cedar Manufacturing reports: the renewal quote includes support lines whose end dates fall before the subscription period. Risk diagnosis: Which piece of evidence would most directly support diagnosis of the specific blocker?
- Install base carries a subsidiary that the customer no longer controls
- Older hardware-only coverage appears despite changed deployment model
- Field deployment report has serials not present in the install base
- Line-level entitlement dates differ from the proposed service term
Explanation
Correct Answer
D:This is the discriminating account evidence: Line-level entitlement dates differ from the proposed service term. It directly supports the case description, while the suitable response is to reconcile coverage dates and renewal term assumptions first. Check the underlying customer and contract records before committing the renewal.
Incorrect Answers
A:This evidence points toward another case: a subsidiary was sold but its old devices remain under the parent contract. For the named account, the relevant observation is 'Line-level entitlement dates differ from the proposed service term', which tests the issue described.
B:That signal would help if the customer migrated from physical to virtual systems but support records were not updated. The present case instead calls for verifying 'Line-level entitlement dates differ from the proposed service term' before choosing a remedy.
C:This is meaningful in a different renewal investigation, but it does not establish the specific blocker in the prompt. The discriminating evidence is 'Line-level entitlement dates differ from the proposed service term', not this unrelated symptom.