Cisco 700-805 Practice Test 35
Question 340
During a subscription portfolio review, Silverline Financial reports: the install base lists retired switches as active support items. Long-term prevention: Which ongoing control would most directly reduce recurrence of this failure?
- Run duplicate-identifier checks before renewal forecasting
- Audit customer-asset associations before commercial release
- Include date alignment checks in install-base validation
- Reconcile retirement and refresh events against the install base
Explanation
Correct Answer
D:This control is matched to the known failure mode: Reconcile retirement and refresh events against the install base. Repeating this check catches the signal 'Retired serials appear in the covered device export' earlier and makes the correct handoff or intervention reliable beyond a single deal.
Incorrect Answers
A:That cadence controls a different process associated with a renewal report includes duplicate serials under two site names. Preventing the described recurrence requires 'Reconcile retirement and refresh events against the install base'.
B:While useful for a device's serial is valid but the renewal record is assigned to the wrong end customer, it would not consistently detect this case's signal. Establish 'Reconcile retirement and refresh events against the install base' instead.
C:A generic control is not enough when the failure mode is specific. This option tracks another risk; the focused prevention step here is 'Reconcile retirement and refresh events against the install base'.
Question 341
In the lead-up to a customer decision, Silverline Financial reports: the install base lists retired switches as active support items. Failure mode: Which proposed shortcut most directly contradicts the corrective approach required here?
- Renew support blindly for every historical serial
- Deduplicate records using verified identifiers and coverage relationships
- Correct end-customer attribution with the authorized data owner
- Reconcile coverage dates and renewal term assumptions first
Explanation
Correct Answer
A:This is the shortcut to avoid: Renew support blindly for every historical serial. It disregards the account-specific signal 'Retired serials appear in the covered device export', leaving the risk unresolved rather than completing the corrective action 'Validate serial lifecycle status before using those assets for renewal quantities'.
Incorrect Answers
B:That is a constructive step for a different customer, especially when a renewal report includes duplicate serials under two site names. It is not the damaging shortcut in this case. The conflicting move here is 'Renew support blindly for every historical serial'.
C:The option may be reasonable for another blocker, but it does not describe the shortcut this prompt asks you to identify. This case's specific unsafe move is 'Renew support blindly for every historical serial'.
D:This is an intervention used for another legitimate situation, not the action that would undermine this account. Here avoid 'Renew support blindly for every historical serial', because the case requires 'Validate serial lifecycle status before using those assets for renewal quantities'.
Question 342
For a renewal program review, Silverline Financial reports: the install base lists retired switches as active support items. Execution handoff: Which correction-then-verification sequence matches this renewal's immediate dependency?
- First reconcile coverage dates and renewal term assumptions first; then verify that every quoted line has an explainable and approved coverage interval
- First validate serial lifecycle status before using those assets for renewal quantities; then verify that quoted assets correspond to the customer's active authorized inventory
- First deduplicate records using verified identifiers and coverage relationships; then verify that each eligible asset is represented once in the quoted scope
- First correct end-customer attribution with the authorized data owner; then verify that contract, entitlement and named customer agree on asset ownership
Explanation
Correct Answer
B:Both steps are necessary in order: Validate serial lifecycle status before using those assets for renewal quantities; then check that quoted assets correspond to the customer's active authorized inventory. The first step corrects the identified issue, while the second establishes evidence of completion before treating the renewal as ready.
Incorrect Answers
A:Handoff sequencing is only useful when it follows the account's actual facts. This route addresses another signal, while this case needs 'Validate serial lifecycle status before using those assets for renewal quantities' followed by verification that 'Quoted assets correspond to the customer's active authorized inventory'.
C:This sequence belongs to a different case: a renewal report includes duplicate serials under two site names. It omits the action 'Validate serial lifecycle status before using those assets for renewal quantities' and its acceptance condition 'Quoted assets correspond to the customer's active authorized inventory'.
D:The paired steps would check another customer's renewal dependency. They do not resolve the issue described; here first 'Validate serial lifecycle status before using those assets for renewal quantities', and then establish 'Quoted assets correspond to the customer's active authorized inventory'.
Question 343
In a discussion with the RM and CSM, Summit Financial reports: a customer has active appliances missing from the service entitlement export. Recommended response: What should the renewals manager or coordinating team do first?
- Collect branch assets and validate support eligibility before pricing
- Validate serial lifecycle status before using those assets for renewal quantities
- Investigate uncovered assets and ownership before building the quote
- Validate relevant new entitlement and service relationships before quoting
Explanation
Correct Answer
C:This addresses the specific obstacle: a customer has active appliances missing from the service entitlement export. The supporting sign is that active serials exist in field records but have no matching coverage. The action therefore targets the account's immediate renewal dependency rather than unrelated housekeeping.
Incorrect Answers
A:This is a plausible renewal task when field deployment report has serials not present in the install base, but that is not the deciding fact given here. The direct remedy in this account is 'Investigate uncovered assets and ownership before building the quote'.
B:The suggestion may support another customer facing the install base lists retired switches as active support items; it leaves this account's specific blocker untouched. Use 'Investigate uncovered assets and ownership before building the quote' to address the documented signal.
D:That work would mainly address a different condition: the customer migrated from physical to virtual systems but support records were not updated. Here the observed problem is a customer has active appliances missing from the service entitlement export, requiring the targeted action 'Investigate uncovered assets and ownership before building the quote'.
Question 344
At a cross-functional renewal checkpoint, Summit Financial reports: a customer has active appliances missing from the service entitlement export. Risk diagnosis: Which piece of evidence would most directly support diagnosis of the specific blocker?
- Older hardware-only coverage appears despite changed deployment model
- Field deployment report has serials not present in the install base
- Retired serials appear in the covered device export
- Active serials exist in field records but have no matching coverage
Explanation
Correct Answer
D:This is the discriminating account evidence: Active serials exist in field records but have no matching coverage. It directly supports the case description, while the suitable response is to investigate uncovered assets and ownership before building the quote. Check the underlying customer and contract records before committing the renewal.
Incorrect Answers
A:This evidence points toward another case: the customer migrated from physical to virtual systems but support records were not updated. For the named account, the relevant observation is 'Active serials exist in field records but have no matching coverage', which tests the issue described.
B:That signal would help if a customer reports a new branch with equipment absent from the partner's inventory. The present case instead calls for verifying 'Active serials exist in field records but have no matching coverage' before choosing a remedy.
C:This is meaningful in a different renewal investigation, but it does not establish the specific blocker in the prompt. The discriminating evidence is 'Active serials exist in field records but have no matching coverage', not this unrelated symptom.
Question 345
During a subscription portfolio review, Summit Financial reports: a customer has active appliances missing from the service entitlement export. Acceptance test: What is the strongest case-specific evidence that the remedy succeeded?
- The renewal scope accounts for eligible uncovered devices or an explicit decision
- Coverage and quantities match the current licensed environment
- New eligible branch assets are accounted for in an approved scope
- Quoted assets correspond to the customer's active authorized inventory
Explanation
Correct Answer
A:This demonstrates a completed remedy: The renewal scope accounts for eligible uncovered devices or an explicit decision. It closes the loop from the observed issue through the action 'Investigate uncovered assets and ownership before building the quote' to an observable, accountable result; mere activity or an emailed proposal would not be enough.
Incorrect Answers
B:This measure would show improvement for a different situation: the customer migrated from physical to virtual systems but support records were not updated. It would not prove the main account's issue was corrected; check 'The renewal scope accounts for eligible uncovered devices or an explicit decision' instead.
C:That outcome can matter when a customer reports a new branch with equipment absent from the partner's inventory, but it does not verify the remedy required by this case. The necessary acceptance evidence is 'The renewal scope accounts for eligible uncovered devices or an explicit decision'.
D:The offered result tests another workstream and could give false confidence about the named obstacle. Successful closure here needs 'The renewal scope accounts for eligible uncovered devices or an explicit decision', tied to the account's actual risk.
Question 346
In the lead-up to a customer decision, Summit Financial reports: a customer has active appliances missing from the service entitlement export. Long-term prevention: Which ongoing control would most directly reduce recurrence of this failure?
- Reconcile retirement and refresh events against the install base
- Compare operational inventory and coverage records periodically
- Review install-base changes after major architecture migrations
- Add new sites to the asset reconciliation cadence
Explanation
Correct Answer
B:This control is matched to the known failure mode: Compare operational inventory and coverage records periodically. Repeating this check catches the signal 'Active serials exist in field records but have no matching coverage' earlier and makes the correct handoff or intervention reliable beyond a single deal.
Incorrect Answers
A:A generic control is not enough when the failure mode is specific. This option tracks another risk; the focused prevention step here is 'Compare operational inventory and coverage records periodically'.
C:That cadence controls a different process associated with the customer migrated from physical to virtual systems but support records were not updated. Preventing the described recurrence requires 'Compare operational inventory and coverage records periodically'.
D:While useful for a customer reports a new branch with equipment absent from the partner's inventory, it would not consistently detect this case's signal. Establish 'Compare operational inventory and coverage records periodically' instead.
Question 347
For a renewal program review, Summit Financial reports: a customer has active appliances missing from the service entitlement export. Failure mode: Which proposed shortcut most directly contradicts the corrective approach required here?
- Collect branch assets and validate support eligibility before pricing
- Validate serial lifecycle status before using those assets for renewal quantities
- Treat an incomplete export as proof no support is needed
- Validate relevant new entitlement and service relationships before quoting
Explanation
Correct Answer
C:This is the shortcut to avoid: Treat an incomplete export as proof no support is needed. It disregards the account-specific signal 'Active serials exist in field records but have no matching coverage', leaving the risk unresolved rather than completing the corrective action 'Investigate uncovered assets and ownership before building the quote'.
Incorrect Answers
A:The option may be reasonable for another blocker, but it does not describe the shortcut this prompt asks you to identify. This case's specific unsafe move is 'Treat an incomplete export as proof no support is needed'.
B:This is an intervention used for another legitimate situation, not the action that would undermine this account. Here avoid 'Treat an incomplete export as proof no support is needed', because the case requires 'Investigate uncovered assets and ownership before building the quote'.
D:That is a constructive step for a different customer, especially when the customer migrated from physical to virtual systems but support records were not updated. It is not the damaging shortcut in this case. The conflicting move here is 'Treat an incomplete export as proof no support is needed'.
Question 348
During the account team's readiness meeting, Summit Financial reports: a customer has active appliances missing from the service entitlement export. Execution handoff: Which correction-then-verification sequence matches this renewal's immediate dependency?
- First validate relevant new entitlement and service relationships before quoting; then verify that coverage and quantities match the current licensed environment
- First collect branch assets and validate support eligibility before pricing; then verify that new eligible branch assets are accounted for in an approved scope
- First validate serial lifecycle status before using those assets for renewal quantities; then verify that quoted assets correspond to the customer's active authorized inventory
- First investigate uncovered assets and ownership before building the quote; then verify that the renewal scope accounts for eligible uncovered devices or an explicit decision
Explanation
Correct Answer
D:Both steps are necessary in order: Investigate uncovered assets and ownership before building the quote; then check that the renewal scope accounts for eligible uncovered devices or an explicit decision. The first step corrects the identified issue, while the second establishes evidence of completion before treating the renewal as ready.
Incorrect Answers
A:This sequence belongs to a different case: the customer migrated from physical to virtual systems but support records were not updated. It omits the action 'Investigate uncovered assets and ownership before building the quote' and its acceptance condition 'The renewal scope accounts for eligible uncovered devices or an explicit decision'.
B:The paired steps would check another customer's renewal dependency. They do not resolve the issue described; here first 'Investigate uncovered assets and ownership before building the quote', and then establish 'The renewal scope accounts for eligible uncovered devices or an explicit decision'.
C:Handoff sequencing is only useful when it follows the account's actual facts. This route addresses another signal, while this case needs 'Investigate uncovered assets and ownership before building the quote' followed by verification that 'The renewal scope accounts for eligible uncovered devices or an explicit decision'.
Question 349
At a cross-functional renewal checkpoint, Willow Financial reports: a subsidiary was sold but its old devices remain under the parent contract. Recommended response: What should the renewals manager or coordinating team do first?
- Reconcile legal ownership and contract association before quoting
- Correct end-customer attribution with the authorized data owner
- Reconcile coverage dates and renewal term assumptions first
- Investigate uncovered assets and ownership before building the quote
Explanation
Correct Answer
A:This addresses the specific obstacle: a subsidiary was sold but its old devices remain under the parent contract. The supporting sign is that install base carries a subsidiary that the customer no longer controls. The action therefore targets the account's immediate renewal dependency rather than unrelated housekeeping.
Incorrect Answers
B:That work would mainly address a different condition: a device's serial is valid but the renewal record is assigned to the wrong end customer. Here the observed problem is a subsidiary was sold but its old devices remain under the parent contract, requiring the targeted action 'Reconcile legal ownership and contract association before quoting'.
C:This is a plausible renewal task when line-level entitlement dates differ from the proposed service term, but that is not the deciding fact given here. The direct remedy in this account is 'Reconcile legal ownership and contract association before quoting'.
D:The suggestion may support another customer facing a customer has active appliances missing from the service entitlement export; it leaves this account's specific blocker untouched. Use 'Reconcile legal ownership and contract association before quoting' to address the documented signal.
Question 350
During a subscription portfolio review, Willow Financial reports: a subsidiary was sold but its old devices remain under the parent contract. Risk diagnosis: Which piece of evidence would most directly support diagnosis of the specific blocker?
- Active serials exist in field records but have no matching coverage
- Install base carries a subsidiary that the customer no longer controls
- Serial history and customer identifier point to different organizations
- Line-level entitlement dates differ from the proposed service term
Explanation
Correct Answer
B:This is the discriminating account evidence: Install base carries a subsidiary that the customer no longer controls. It directly supports the case description, while the suitable response is to reconcile legal ownership and contract association before quoting. Check the underlying customer and contract records before committing the renewal.
Incorrect Answers
A:This is meaningful in a different renewal investigation, but it does not establish the specific blocker in the prompt. The discriminating evidence is 'Install base carries a subsidiary that the customer no longer controls', not this unrelated symptom.
C:This evidence points toward another case: a device's serial is valid but the renewal record is assigned to the wrong end customer. For the named account, the relevant observation is 'Install base carries a subsidiary that the customer no longer controls', which tests the issue described.
D:That signal would help if the renewal quote includes support lines whose end dates fall before the subscription period. The present case instead calls for verifying 'Install base carries a subsidiary that the customer no longer controls' before choosing a remedy.