Cisco 500-220 Practice Test 89
Question 880
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A new MR gets PoE and broadcasts a configured SSID while its Dashboard check-in remains pending. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Check the EAP exchange and authorized identity backend independently from RF association when enterprise Wi-Fi rejects users.
- Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
- Connect through the approved local management path and compare local uplink tests with remote Dashboard status.
- Use model-supported local diagnostics to verify device uplink state during a Dashboard check-in failure.
- Compare local WAN/LAN addressing and DNS tests with remote Dashboard last contact and a client traffic probe.
Explanation
Correct Answers
D:The targeted next step is: Use model-supported local diagnostics to verify device uplink state during a Dashboard check-in failure.
E:The discriminating evidence is: Compare local WAN/LAN addressing and DNS tests with remote Dashboard last contact and a client traffic probe.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Device local status page during cloud management loss requirement.
B:That evidence is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Device local status page during cloud management loss requirement.
C:That evidence is relevant to the distinct Meraki subject of Local status page versus cloud Dashboard troubleshooting, not the specific Device local status page during cloud management loss requirement.
Question 881
A Cisco Meraki deployment engineer investigates this operational case: A valid application update is blocked by a newly triggered IPS rule but all other browsing works. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Assign the appropriate MX VLAN interface, subnet and DHCP scope after confirming the routed LAN design.
- Identify whether an Auto VPN failure is tunnel establishment, advertised routing or policy enforcement.
- Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
- Plan video retention against model capabilities, recording mode and compliance requirements before changing settings.
Explanation
Correct Answer
C:The targeted next step is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage. The technical reason is: Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific Security Center threat event investigation and false positive requirement.
B:That action is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific Security Center threat event investigation and false positive requirement. For this scenario, the proper response is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
D:That action is relevant to the distinct Meraki subject of MV camera retention and storage planning, not the specific Security Center threat event investigation and false positive requirement.
Question 882
A peer reviewer evaluates the following Meraki case. A valid application update is blocked by a newly triggered IPS rule but all other browsing works. The proposed action is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage. Which technical principle BEST supports this decision? Select ONE best answer.
- Dashboard permissions may differ by network and capability; granting a global role for one operational task violates least privilege.
- A missing or mismatched VLAN tag can prevent DHCP or gateway reachability while other VLANs work on the same physical uplink.
- Dashboard firmware progress, current version and device check-in must be observed together; unsupported manual rollback can worsen a failure.
- Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally.
Explanation
Correct Answer
D:Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally. In this situation (A valid application update is blocked by a newly triggered IPS rule but all other browsing works.), it justifies the action: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Security Center threat event investigation and false positive requirement.
B:That principle is relevant to the distinct Meraki subject of VLAN trunk mismatch and missing DHCP across MS links, not the specific Security Center threat event investigation and false positive requirement.
C:That principle is relevant to the distinct Meraki subject of Upgrade failure and rollback escalation, not the specific Security Center threat event investigation and false positive requirement.
Question 883
A Meraki support engineer must distinguish facts from assumptions. A valid application update is blocked by a newly triggered IPS rule but all other browsing works. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
- Compare primary and secondary uplink graphs, observed ping loss and application errors across aligned timestamps.
- Compare switch port trunk configuration, permitted VLANs, DHCP requests and correct SVI reachability.
Explanation
Correct Answer
A:The discriminating evidence is: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction. Expected result: The service's actual policy or threat-detection cause is established and any exception is narrowly authorized.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Security Center threat event investigation and false positive requirement.
C:That evidence is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Security Center threat event investigation and false positive requirement.
D:That evidence is relevant to the distinct Meraki subject of VLAN trunk mismatch and missing DHCP across MS links, not the specific Security Center threat event investigation and false positive requirement.
Question 884
An implementation lead needs a measurable acceptance criterion for a Meraki change. A valid application update is blocked by a newly triggered IPS rule but all other browsing works. The proposed validation is: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The field technician reports a specific management connectivity defect without unnecessarily resetting healthy equipment.
- Priority applications maintain their acceptable response while lower-priority traffic respects agreed limits.
- The service's actual policy or threat-detection cause is established and any exception is narrowly authorized.
- The broader upgrade proceeds only after pilot wireless services meet agreed compatibility checks.
Explanation
Correct Answer
C:The acceptance criterion is: The service's actual policy or threat-detection cause is established and any exception is narrowly authorized. Verify it using: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific Security Center threat event investigation and false positive requirement.
B:That outcome is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific Security Center threat event investigation and false positive requirement.
D:That outcome is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific Security Center threat event investigation and false positive requirement.
Question 885
A Meraki operations reviewer examines this case. A valid application update is blocked by a newly triggered IPS rule but all other browsing works. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Treat a hidden SSID as equivalent to certificate-backed identity authentication.
- Assume an MS MAC address table alone routes between distinct IP subnets without L3 configuration.
- Declare the ISP at fault because an application's response graph is slow without comparing path metrics.
- Switch off IDS/IPS for the entire company because one upload is flagged by a suspicious signature.
Explanation
Correct Answer
D:It conflicts with the relevant behavior: Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Enterprise SSID design for authentication and segmentation), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Security Center threat event investigation and false positive: Switch off IDS/IPS for the entire company because one upload is flagged by a suspicious signature.
B:That proposal is unsafe in its own context (the separate topic of MS switch routing interface and L3 reachability), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Security Center threat event investigation and false positive: Switch off IDS/IPS for the entire company because one upload is flagged by a suspicious signature.
C:That proposal is unsafe in its own context (the separate topic of Meraki Insight SaaS performance and loss isolation), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Security Center threat event investigation and false positive: Switch off IDS/IPS for the entire company because one upload is flagged by a suspicious signature.
Question 886
A Cisco Meraki deployment engineer investigates this operational case: An infected client repeatedly contacts a flagged domain and the SOC must identify the endpoint instead of allowing the traffic. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Identify whether an Auto VPN failure is tunnel establishment, advertised routing or policy enforcement.
- Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
- Replicate known-good supported switch port settings from a verified source without duplicating site-specific mistakes.
- Verify MV camera power, network and configured alert rules before treating a missing motion notification as lost video.
Explanation
Correct Answer
B:The targeted next step is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage. The technical reason is: Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally. A successful verification would use: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific Security Center threat event investigation and false positive requirement. For this scenario, the proper response is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage. Verify it through: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
C:That action is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific Security Center threat event investigation and false positive requirement.
D:That action is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific Security Center threat event investigation and false positive requirement.
Question 887
A peer reviewer evaluates the following Meraki case. An infected client repeatedly contacts a flagged domain and the SOC must identify the endpoint instead of allowing the traffic. The proposed action is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage. Which technical principle BEST supports this decision? Select ONE best answer.
- Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally.
- A wireless client can associate at the radio level yet fail access because RADIUS, certificate or VLAN policy rejects it.
- Wi-Fi quality depends on RF and client roaming conditions; successful SSID discovery does not establish usable application traffic.
- Meraki Systems Manager assigns applications according to managed endpoint scope, device capabilities and app delivery method.
Explanation
Correct Answer
A:Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally. In this situation (An infected client repeatedly contacts a flagged domain and the SOC must identify the endpoint instead of allowing the traffic.), it justifies the action: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Security Center threat event investigation and false positive requirement.
C:That principle is relevant to the distinct Meraki subject of MR wireless RF interference and roaming diagnosis, not the specific Security Center threat event investigation and false positive requirement.
D:That principle is relevant to the distinct Meraki subject of Systems Manager application deployment and tag scope, not the specific Security Center threat event investigation and false positive requirement.
Question 888
A Meraki support engineer must distinguish facts from assumptions. An infected client repeatedly contacts a flagged domain and the SOC must identify the endpoint instead of allowing the traffic. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare alert history, device online status and matching client or uplink events during the incident window.
- Review VPN status, peer paths, remote route presence and a matching inter-site traffic test.
- Compare Dashboard online status, management DNS reachability and a same-VLAN client test during the same interval.
- Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
Explanation
Correct Answer
D:The discriminating evidence is: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction. Expected result: The service's actual policy or threat-detection cause is established and any exception is narrowly authorized.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Dashboard alerts versus actual incident evidence, not the specific Security Center threat event investigation and false positive requirement.
B:That evidence is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific Security Center threat event investigation and false positive requirement.
C:That evidence is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific Security Center threat event investigation and false positive requirement.
Question 889
An implementation lead needs a measurable acceptance criterion for a Meraki change. An infected client repeatedly contacts a flagged domain and the SOC must identify the endpoint instead of allowing the traffic. The proposed validation is: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The branch receives shared security settings while retaining its correct local VLAN and addressing requirements.
- Valid clients authenticate and reach expected resources without weakening security to solve an identity issue.
- The service's actual policy or threat-detection cause is established and any exception is narrowly authorized.
- The analyst can state which client stage failed and when, with documented supporting observations.
Explanation
Correct Answer
C:The acceptance criterion is: The service's actual policy or threat-detection cause is established and any exception is narrowly authorized. Verify it using: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction. The associated corrective action is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific Security Center threat event investigation and false positive requirement.
B:That outcome is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Security Center threat event investigation and false positive requirement.
D:That outcome is relevant to the distinct Meraki subject of Dashboard client timeline and event filtering, not the specific Security Center threat event investigation and false positive requirement.
Question 890
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An infected client repeatedly contacts a flagged domain and the SOC must identify the endpoint instead of allowing the traffic. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Follow Dashboard API pagination links until all authorized result pages are retrieved before declaring an inventory complete.
- Inspect classification, configured rules, uplink loss/latency and a sampled flow before and after a test.
- Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
- Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection.
- Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
Explanation
Correct Answers
C:The targeted next step is: Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
E:The discriminating evidence is: Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific Security Center threat event investigation and false positive requirement.
B:That evidence is relevant to the distinct Meraki subject of MX SD-WAN traffic preferences and shaping, not the specific Security Center threat event investigation and false positive requirement.
D:That evidence is relevant to the distinct Meraki subject of MX Auto VPN participation for selected VLANs, not the specific Security Center threat event investigation and false positive requirement.