Cisco 500-220 Practice Test 82
Question 810
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A mixed-generation MR deployment needs to know which features work consistently before enforcing one RF profile. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Read the current setting and keep a before/after audit when applying API configuration changes across many networks.
- Compare detected BSSID, wired connection context, security classification and approved response policy.
- Compare exact model, reported firmware, release notes and supported configuration options.
- Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
- Verify model and firmware feature support before applying a setting copied from a different Meraki platform.
Explanation
Correct Answers
C:The discriminating evidence is: Compare exact model, reported firmware, release notes and supported configuration options.
E:The targeted next step is: Verify model and firmware feature support before applying a setting copied from a different Meraki platform.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Firmware version differences and configuration feature support requirement.
B:That evidence is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific Firmware version differences and configuration feature support requirement.
D:That evidence is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific Firmware version differences and configuration feature support requirement.
Question 811
A Cisco Meraki deployment engineer investigates this operational case: An access switch is connected to the same aggregation network through two uncontrolled links and all clients become slow. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Review Air Marshal detections against an authorized SSID inventory and choose proportionate investigation instead of blindly blocking neighbors.
- Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
- Use model-supported local diagnostics to verify device uplink state during a Dashboard check-in failure.
- Place 802.1X enforcement on a supported access authenticator and coordinate the resulting VLAN with MX routing policy.
Explanation
Correct Answer
B:The targeted next step is: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling. The technical reason is: Redundant layer-2 paths can create loops unless an appropriate loop-prevention mechanism blocks or controls them.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific Layer two loop and spanning tree diagnosis requirement.
C:That action is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That action is relevant to the distinct Meraki subject of MX access policies and switch-side authentication boundary, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 812
A peer reviewer evaluates the following Meraki case. An access switch is connected to the same aggregation network through two uncontrolled links and all clients become slow. The proposed action is: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling. Which technical principle BEST supports this decision? Select ONE best answer.
- Hardware replacement, claim history and licensing model determine how device entitlement continues; serial substitution requires an accurate asset record.
- Security inspection alerts have actions and signatures that need correlation; a single event severity label does not justify disabling protection globally.
- Sentry-assisted connectivity uses managed device and network context; merely tagging a phone does not automatically prove successful WLAN onboarding.
- Redundant layer-2 paths can create loops unless an appropriate loop-prevention mechanism blocks or controls them.
Explanation
Correct Answer
D:Redundant layer-2 paths can create loops unless an appropriate loop-prevention mechanism blocks or controls them. In this situation (An access switch is connected to the same aggregation network through two uncontrolled links and all clients become slow.), it justifies the action: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific Layer two loop and spanning tree diagnosis requirement.
B:That principle is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific Layer two loop and spanning tree diagnosis requirement.
C:That principle is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 813
A Meraki support engineer must distinguish facts from assumptions. An access switch is connected to the same aggregation network through two uncontrolled links and all clients become slow. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
- Test a specific client flow against MR SSID policy, VLAN assignment and the MX security rule that applies.
- Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
- Inspect returned Link next-page information, accumulated serial IDs and a Dashboard inventory comparison.
Explanation
Correct Answer
A:The discriminating evidence is: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event. Expected result: The loop is isolated and stable connectivity returns without disabling all redundant uplinks blindly.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific Layer two loop and spanning tree diagnosis requirement.
C:That evidence is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That evidence is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 814
An implementation lead needs a measurable acceptance criterion for a Meraki change. An access switch is connected to the same aggregation network through two uncontrolled links and all clients become slow. The proposed validation is: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Required video evidence remains accessible and alerts fire only for the intended conditions.
- The correct branch-to-hub VPN route and security path are both confirmed without restarting unrelated peers.
- The loop is isolated and stable connectivity returns without disabling all redundant uplinks blindly.
- Voice stays intelligible while bulk traffic shares the link according to the approved policy.
Explanation
Correct Answer
C:The acceptance criterion is: The loop is isolated and stable connectivity returns without disabling all redundant uplinks blindly. Verify it using: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event. The associated corrective action is: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific Layer two loop and spanning tree diagnosis requirement.
B:That outcome is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That outcome is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 815
A Meraki operations reviewer examines this case. An access switch is connected to the same aggregation network through two uncontrolled links and all clients become slow. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Disable spanning tree everywhere because a newly connected cable caused a broadcast storm.
- Place the same IPv4 gateway address on two unrelated VLAN interfaces and expect unambiguous routing.
- Declare the ISP at fault because an application's response graph is slow without comparing path metrics.
- Assume the local status page grants unrestricted policy editing identical to every Dashboard control.
Explanation
Correct Answer
A:It conflicts with the relevant behavior: Redundant layer-2 paths can create loops unless an appropriate loop-prevention mechanism blocks or controls them.
Incorrect Answers
B:That proposal is unsafe in its own context (the separate topic of MX VLAN interfaces and DHCP configuration), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Layer two loop and spanning tree diagnosis: Disable spanning tree everywhere because a newly connected cable caused a broadcast storm.
C:That proposal is unsafe in its own context (the separate topic of Meraki Insight SaaS performance and loss isolation), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Layer two loop and spanning tree diagnosis: Disable spanning tree everywhere because a newly connected cable caused a broadcast storm.
D:That proposal is unsafe in its own context (the separate topic of Local status page versus cloud Dashboard troubleshooting), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Layer two loop and spanning tree diagnosis: Disable spanning tree everywhere because a newly connected cable caused a broadcast storm.
Question 816
A Cisco Meraki deployment engineer investigates this operational case: Dashboard shows MAC-address flapping after an installer patches two wall jacks together. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Trace the forward and reverse route for a single failing client flow before replacing an MX or MS appliance.
- Use matched threat events and source context to decide whether a security block or false positive is causing the application outage.
- Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
- Use available SNMP interface counters and error trends with time alignment to investigate a suspected physical or congestion issue.
Explanation
Correct Answer
C:The targeted next step is: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling. The technical reason is: Redundant layer-2 paths can create loops unless an appropriate loop-prevention mechanism blocks or controls them. A successful verification would use: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific Layer two loop and spanning tree diagnosis requirement.
B:That action is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That action is relevant to the distinct Meraki subject of SNMP telemetry and counter interpretation, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 817
A peer reviewer evaluates the following Meraki case. Dashboard shows MAC-address flapping after an installer patches two wall jacks together. The proposed action is: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling. Which technical principle BEST supports this decision? Select ONE best answer.
- Redundant layer-2 paths can create loops unless an appropriate loop-prevention mechanism blocks or controls them.
- Application response degradation may arise beyond the MX, while WAN loss can affect multiple services; both need synchronized evidence.
- Managed enrollment status enables device-policy functions only where the platform and ownership mode support them.
- Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally.
Explanation
Correct Answer
A:Redundant layer-2 paths can create loops unless an appropriate loop-prevention mechanism blocks or controls them. In this situation (Dashboard shows MAC-address flapping after an installer patches two wall jacks together.), it justifies the action: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of Meraki Insight SaaS performance and loss isolation, not the specific Layer two loop and spanning tree diagnosis requirement.
C:That principle is relevant to the distinct Meraki subject of Systems Manager MDM enrollment and compliance profiles, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That principle is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 818
A Meraki support engineer must distinguish facts from assumptions. Dashboard shows MAC-address flapping after an installer patches two wall jacks together. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare client event history, AP channel/utilization, RSSI trends and authentication records during the failure.
- Review supported platform mode, routing configuration, neighbor status and learned prefixes in the designated topology.
- Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
- Compare source and destination port roles, VLANs, PoE, labels and actual endpoint connectivity.
Explanation
Correct Answer
C:The discriminating evidence is: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event. Expected result: The loop is isolated and stable connectivity returns without disabling all redundant uplinks blindly.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MR wireless RF interference and roaming diagnosis, not the specific Layer two loop and spanning tree diagnosis requirement.
B:That evidence is relevant to the distinct Meraki subject of OSPF LAN exchange and MX routing design, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That evidence is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 819
An implementation lead needs a measurable acceptance criterion for a Meraki change. Dashboard shows MAC-address flapping after an installer patches two wall jacks together. The proposed validation is: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The loop is isolated and stable connectivity returns without disabling all redundant uplinks blindly.
- The field technician reports a specific management connectivity defect without unnecessarily resetting healthy equipment.
- A specific degraded ISP path is identified or excluded without changing healthy traffic policies.
- The report includes all intended networks and its metrics are interpreted within the correct timeframe.
Explanation
Correct Answer
A:The acceptance criterion is: The loop is isolated and stable connectivity returns without disabling all redundant uplinks blindly. Verify it using: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific Layer two loop and spanning tree diagnosis requirement.
C:That outcome is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That outcome is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific Layer two loop and spanning tree diagnosis requirement.
Question 820
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. Dashboard shows MAC-address flapping after an installer patches two wall jacks together. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
- Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration.
- Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
- Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.
- Check the organization's licensing mode and the applicable Cisco Meraki model-specific guidance before interpreting a warning.
Explanation
Correct Answers
A:The targeted next step is: Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
C:The discriminating evidence is: Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Layer two loop and spanning tree diagnosis requirement.
D:That evidence is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Layer two loop and spanning tree diagnosis requirement.
E:That evidence is relevant to the distinct Meraki subject of Meraki subscription licensing versus historical per-device licensing, not the specific Layer two loop and spanning tree diagnosis requirement.