Cisco 500-220 Practice Test 78
Question 770
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A campus upgraded its entire wireless fleet and discovered one legacy scanner class cannot associate. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Compare the network type and inventory with the configuration tabs requested by operations.
- Compare firmware targets, pilot client association, retries, roaming and change-window results.
- Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
- Use available SNMP interface counters and error trends with time alignment to investigate a suspected physical or congestion issue.
- Pilot MR firmware on representative access points and client types before a wide network rollout.
Explanation
Correct Answers
B:The discriminating evidence is: Compare firmware targets, pilot client association, retries, roaming and change-window results.
E:The targeted next step is: Pilot MR firmware on representative access points and client types before a wide network rollout.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Combined networks and device role visibility, not the specific Staged MR firmware rollout and client compatibility requirement.
C:That evidence is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Staged MR firmware rollout and client compatibility requirement.
D:That action is relevant to the distinct Meraki subject of SNMP telemetry and counter interpretation, not the specific Staged MR firmware rollout and client compatibility requirement.
Question 771
A Cisco Meraki deployment engineer investigates this operational case: A healthcare branch runs 24-hour telemedicine and needs a risk-controlled MX software upgrade. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
- Use dynamic tags or configured target groups for managed application deployment with installation feedback.
- Use role-scoped access that permits monitoring for the SOC while reserving configuration changes for the authorized network team.
- Distinguish a delayed upgrade from a failed upgrade and follow supported recovery and escalation steps rather than manual image tampering.
Explanation
Correct Answer
A:The targeted next step is: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change. The technical reason is: Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of Systems Manager application deployment and tag scope, not the specific MX firmware scheduled maintenance and WAN failover requirement.
C:That action is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific MX firmware scheduled maintenance and WAN failover requirement.
D:That action is relevant to the distinct Meraki subject of Upgrade failure and rollback escalation, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 772
A peer reviewer evaluates the following Meraki case. A healthcare branch runs 24-hour telemedicine and needs a risk-controlled MX software upgrade. The proposed action is: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change. Which technical principle BEST supports this decision? Select ONE best answer.
- MX high availability reduces single-appliance failure risk but depends on physical links, consistent config and correct placement.
- Dashboard firmware progress, current version and device check-in must be observed together; unsupported manual rollback can worsen a failure.
- Hub-to-hub participation can enable meshing while spoke designs reduce unnecessary peer relationships in large deployments.
- Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation.
Explanation
Correct Answer
D:Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation. In this situation (A healthcare branch runs 24-hour telemedicine and needs a risk-controlled MX software upgrade.), it justifies the action: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific MX firmware scheduled maintenance and WAN failover requirement.
B:That principle is relevant to the distinct Meraki subject of Upgrade failure and rollback escalation, not the specific MX firmware scheduled maintenance and WAN failover requirement.
C:That principle is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 773
A Meraki support engineer must distinguish facts from assumptions. A healthcare branch runs 24-hour telemedicine and needs a risk-controlled MX software upgrade. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare Dashboard uplink loss/latency/jitter history with approved class thresholds and the application SLA.
- Compare template binding state, site-specific subnet variables and the network configuration change history.
- Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
- Compare scheduled upgrade job, current firmware report, device connectivity and available support guidance.
Explanation
Correct Answer
C:The discriminating evidence is: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot. Expected result: Critical sites recover expected WAN and VPN services within the approved maintenance plan.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific MX firmware scheduled maintenance and WAN failover requirement.
B:That evidence is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific MX firmware scheduled maintenance and WAN failover requirement.
D:That evidence is relevant to the distinct Meraki subject of Upgrade failure and rollback escalation, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 774
An implementation lead needs a measurable acceptance criterion for a Meraki change. A healthcare branch runs 24-hour telemedicine and needs a risk-controlled MX software upgrade. The proposed validation is: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The client population maintains acceptable airtime and roaming behavior under a representative load.
- The feature is applied only on capable devices or a documented alternative is chosen.
- Critical sites recover expected WAN and VPN services within the approved maintenance plan.
- Voice stays intelligible while bulk traffic shares the link according to the approved policy.
Explanation
Correct Answer
C:The acceptance criterion is: Critical sites recover expected WAN and VPN services within the approved maintenance plan. Verify it using: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot. The associated corrective action is: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific MX firmware scheduled maintenance and WAN failover requirement.
B:That outcome is relevant to the distinct Meraki subject of Firmware version differences and configuration feature support, not the specific MX firmware scheduled maintenance and WAN failover requirement.
D:That outcome is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 775
A Meraki operations reviewer examines this case. A healthcare branch runs 24-hour telemedicine and needs a risk-controlled MX software upgrade. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Copy an unknown firmware image into an appliance filesystem from an untrusted source to bypass Dashboard recovery.
- Erase a branch's known-good VLAN mapping merely because its configuration differs from a template screenshot.
- Schedule a stack upgrade without notifying dependent voice and camera service owners because switches are cloud-managed.
- Assume a second ISP guarantees there will be zero service impact during every MX firmware reload.
Explanation
Correct Answer
D:It conflicts with the relevant behavior: Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Upgrade failure and rollback escalation), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX firmware scheduled maintenance and WAN failover: Assume a second ISP guarantees there will be zero service impact during every MX firmware reload.
B:That proposal is unsafe in its own context (the separate topic of Template drift and configuration audit), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX firmware scheduled maintenance and WAN failover: Assume a second ISP guarantees there will be zero service impact during every MX firmware reload.
C:That proposal is unsafe in its own context (the separate topic of MS firmware and switch stack sequencing), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns MX firmware scheduled maintenance and WAN failover: Assume a second ISP guarantees there will be zero service impact during every MX firmware reload.
Question 776
A Cisco Meraki deployment engineer investigates this operational case: A branch MX successfully upgrades but Auto VPN routes remain absent for one application subnet afterward. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Pilot MR firmware on representative access points and client types before a wide network rollout.
- Limit full-mesh participation to sites with a demonstrated direct-connectivity requirement and assess tunnel scale.
- Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
- Set per-uplink bandwidth assumptions and measured traffic shaping policies to protect critical classes from congestion.
Explanation
Correct Answer
C:The targeted next step is: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change. The technical reason is: Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation. A successful verification would use: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific MX firmware scheduled maintenance and WAN failover requirement.
B:That action is relevant to the distinct Meraki subject of Mesh Auto VPN scaling and required lateral paths, not the specific MX firmware scheduled maintenance and WAN failover requirement.
D:That action is relevant to the distinct Meraki subject of Dual uplink bandwidth and application shaping design, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 777
A peer reviewer evaluates the following Meraki case. A branch MX successfully upgrades but Auto VPN routes remain absent for one application subnet afterward. The proposed action is: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change. Which technical principle BEST supports this decision? Select ONE best answer.
- Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation.
- A stack or redundant pair may have different upgrade sequencing behavior by model and firmware; a single green Dashboard tile is not sufficient validation.
- Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally.
- Firmware changes can affect device behavior and wireless client interoperability; a staged test limits correlated outage exposure.
Explanation
Correct Answer
A:Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation. In this situation (A branch MX successfully upgrades but Auto VPN routes remain absent for one application subnet afterward.), it justifies the action: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of MS firmware and switch stack sequencing, not the specific MX firmware scheduled maintenance and WAN failover requirement.
C:That principle is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific MX firmware scheduled maintenance and WAN failover requirement.
D:That principle is relevant to the distinct Meraki subject of Staged MR firmware rollout and client compatibility, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 778
A Meraki support engineer must distinguish facts from assumptions. A branch MX successfully upgrades but Auto VPN routes remain absent for one application subnet afterward. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
- Compare SM managed-device status, MR/MX integration, issued credentials and an actual client connection.
- Compare detected BSSID, wired connection context, security classification and approved response policy.
- Compare exact model, reported firmware, release notes and supported configuration options.
Explanation
Correct Answer
A:The discriminating evidence is: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot. Expected result: Critical sites recover expected WAN and VPN services within the approved maintenance plan.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Systems Manager Sentry and network access integration, not the specific MX firmware scheduled maintenance and WAN failover requirement.
C:That evidence is relevant to the distinct Meraki subject of MR Air Marshal threat and rogue SSID monitoring, not the specific MX firmware scheduled maintenance and WAN failover requirement.
D:That evidence is relevant to the distinct Meraki subject of Firmware version differences and configuration feature support, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 779
An implementation lead needs a measurable acceptance criterion for a Meraki change. A branch MX successfully upgrades but Auto VPN routes remain absent for one application subnet afterward. The proposed validation is: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- Critical sites recover expected WAN and VPN services within the approved maintenance plan.
- The affected client VLAN is carried end-to-end and receives the intended address and network access.
- The new device appears under the intended tenant and network while unrelated customer assets stay separated.
- The ticket records a verified successful version or a controlled documented escalation without arbitrary destructive resets.
Explanation
Correct Answer
A:The acceptance criterion is: Critical sites recover expected WAN and VPN services within the approved maintenance plan. Verify it using: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of VLAN trunk mismatch and missing DHCP across MS links, not the specific MX firmware scheduled maintenance and WAN failover requirement.
C:That outcome is relevant to the distinct Meraki subject of Organization and network hierarchy in Dashboard, not the specific MX firmware scheduled maintenance and WAN failover requirement.
D:That outcome is relevant to the distinct Meraki subject of Upgrade failure and rollback escalation, not the specific MX firmware scheduled maintenance and WAN failover requirement.
Question 780
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch MX successfully upgrades but Auto VPN routes remain absent for one application subnet afterward. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Verify DHCP server identity, snooping trust, STP status and a test rogue server scenario where supported.
- Test a specific client flow against MR SSID policy, VLAN assignment and the MX security rule that applies.
- Compare MR RF profile, supported client bands, per-channel utilization and a targeted roaming test.
- Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
- Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
Explanation
Correct Answers
D:The discriminating evidence is: Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
E:The targeted next step is: Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Layer two protections and unauthorized DHCP sources, not the specific MX firmware scheduled maintenance and WAN failover requirement.
B:That evidence is relevant to the distinct Meraki subject of Security policy design across MX firewall and MR WLAN, not the specific MX firmware scheduled maintenance and WAN failover requirement.
C:That evidence is relevant to the distinct Meraki subject of MR RF profile and band planning across device generations, not the specific MX firmware scheduled maintenance and WAN failover requirement.