Cisco 500-220 Practice Test 73
Question 720
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An automation job starts returning 401 after the team rotated its stored API credential. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration.
- Test the API client's valid authentication mechanism and role scope before assuming that a 403 means a device is offline.
- Check report scope, date range, timezone and included networks before comparing historical usage summaries.
- Inspect HTTP response code, API organization scope and a minimal authorized read operation without exposing credentials.
- Check peer state, accepted and advertised prefixes and next-hop reachability at the intended datacenter edge.
Explanation
Correct Answers
B:The targeted next step is: Test the API client's valid authentication mechanism and role scope before assuming that a 403 means a device is offline.
D:The discriminating evidence is: Inspect HTTP response code, API organization scope and a minimal authorized read operation without exposing credentials.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Meraki Dashboard API authentication and scoped permissions requirement.
C:That action is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific Meraki Dashboard API authentication and scoped permissions requirement.
E:That evidence is relevant to the distinct Meraki subject of BGP route exchange at VPN hub and datacenter, not the specific Meraki Dashboard API authentication and scoped permissions requirement.
Question 721
A Cisco Meraki deployment engineer investigates this operational case: A monitoring integration receives HTTP 429 after adding hundreds of branches to a per-second poll job. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Use model-supported local diagnostics to verify device uplink state during a Dashboard check-in failure.
- Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
- Use supported action batching or templates for repetitive network changes while monitoring per-action validation results.
- Trace the forward and reverse route for a single failing client flow before replacing an MX or MS appliance.
Explanation
Correct Answer
B:The targeted next step is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. The technical reason is: Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Device local status page during cloud management loss, not the specific Dashboard API organization rate limiting and retry requirement.
C:That action is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Dashboard API organization rate limiting and retry requirement.
D:That action is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
Question 722
A peer reviewer evaluates the following Meraki case. A monitoring integration receives HTTP 429 after adding hundreds of branches to a per-second poll job. The proposed action is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. Which technical principle BEST supports this decision? Select ONE best answer.
- Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure.
- Paginated API endpoints can return only a subset of the device list; an initial successful response is not proof all items are included.
- Managed enrollment status enables device-policy functions only where the platform and ownership mode support them.
- Virtual appliance capacity and cloud-region availability are design constraints distinct from simply adding more Auto VPN spokes.
Explanation
Correct Answer
A:Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure. In this situation (A monitoring integration receives HTTP 429 after adding hundreds of branches to a per-second poll job.), it justifies the action: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific Dashboard API organization rate limiting and retry requirement.
C:That principle is relevant to the distinct Meraki subject of Systems Manager MDM enrollment and compliance profiles, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
D:That principle is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
Question 723
A Meraki support engineer must distinguish facts from assumptions. A monitoring integration receives HTTP 429 after adding hundreds of branches to a per-second poll job. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
- Review response headers, per-organization request rate and retry behavior in a controlled test.
- Compare planned branch traffic aggregate, supported vMX scale, instance placement and failover path against requirements.
- Compare target network identifiers, prior setting, API method/status, change history and a sample traffic test.
Explanation
Correct Answer
B:The discriminating evidence is: Review response headers, per-organization request rate and retry behavior in a controlled test. Expected result: The script backs off predictably and retrieves results without causing a persistent 429 storm.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
C:That evidence is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific Dashboard API organization rate limiting and retry requirement.
D:That evidence is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Dashboard API organization rate limiting and retry requirement.
Question 724
An implementation lead needs a measurable acceptance criterion for a Meraki change. A monitoring integration receives HTTP 429 after adding hundreds of branches to a per-second poll job. The proposed validation is: Review response headers, per-organization request rate and retry behavior in a controlled test. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- A visitor completes authorized onboarding and browses externally while protected business networks remain unreachable.
- All expected access ports and uplinks return to service after a documented upgrade outcome.
- The script backs off predictably and retrieves results without causing a persistent 429 storm.
- The requested changes reach exactly intended networks and can be reversed using recorded configuration.
Explanation
Correct Answer
C:The acceptance criterion is: The script backs off predictably and retrieves results without causing a persistent 429 storm. Verify it using: Review response headers, per-organization request rate and retry behavior in a controlled test. The associated corrective action is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Guest Wi-Fi captive portal and traffic isolation, not the specific Dashboard API organization rate limiting and retry requirement.
B:That outcome is relevant to the distinct Meraki subject of MS firmware and switch stack sequencing, not the specific Dashboard API organization rate limiting and retry requirement.
D:That outcome is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
Question 725
A Meraki operations reviewer examines this case. A monitoring integration receives HTTP 429 after adding hundreds of branches to a per-second poll job. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Set the enterprise SSID to open access because one user has an expired certificate.
- Assume an MX WAN uplink automatically forms OSPF adjacencies with every public Internet provider.
- Launch parallel retry loops with no delay for every failed request to overcome organization API throttling.
- Send an unrestricted bulk update to every organization network without checking target IDs or prior policies.
Explanation
Correct Answer
C:It conflicts with the relevant behavior: Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of MR authentication and RADIUS reject troubleshooting), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Dashboard API organization rate limiting and retry: Launch parallel retry loops with no delay for every failed request to overcome organization API throttling.
B:That proposal is unsafe in its own context (the separate topic of OSPF LAN exchange and MX routing design), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Dashboard API organization rate limiting and retry: Launch parallel retry loops with no delay for every failed request to overcome organization API throttling.
D:That proposal is unsafe in its own context (the separate topic of Dashboard API idempotent change and preflight audit), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Dashboard API organization rate limiting and retry: Launch parallel retry loops with no delay for every failed request to overcome organization API throttling.
Question 726
A Cisco Meraki deployment engineer investigates this operational case: An inventory script handles one network fine but overwhelms an organization when all sites start polling together. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Verify the administrator's organization role, MFA status and intended scope before granting access to a new network.
- Trace the forward and reverse route for a single failing client flow before replacing an MX or MS appliance.
- Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
- Test the API client's valid authentication mechanism and role scope before assuming that a 403 means a device is offline.
Explanation
Correct Answer
C:The targeted next step is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. The technical reason is: Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure. A successful verification would use: Review response headers, per-organization request rate and retry behavior in a controlled test.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Dashboard administrator authentication and least privilege, not the specific Dashboard API organization rate limiting and retry requirement.
B:That action is relevant to the distinct Meraki subject of Layer three next-hop and return-route troubleshooting, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. Verify it through: Review response headers, per-organization request rate and retry behavior in a controlled test.
D:That action is relevant to the distinct Meraki subject of Meraki Dashboard API authentication and scoped permissions, not the specific Dashboard API organization rate limiting and retry requirement.
Question 727
A peer reviewer evaluates the following Meraki case. An inventory script handles one network fine but overwhelms an organization when all sites start polling together. The proposed action is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. Which technical principle BEST supports this decision? Select ONE best answer.
- Virtual appliance capacity and cloud-region availability are design constraints distinct from simply adding more Auto VPN spokes.
- Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure.
- Managed enrollment status enables device-policy functions only where the platform and ownership mode support them.
- Bulk Meraki configuration workflows can reduce request load but need individual operation outcomes and appropriate safety gates.
Explanation
Correct Answer
B:Meraki Dashboard API rate limits are shared across organization traffic and can reject bursts without indicating service failure. In this situation (An inventory script handles one network fine but overwhelms an organization when all sites start polling together.), it justifies the action: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Cloud concentrator scaling and failure domains, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. Verify it through: Review response headers, per-organization request rate and retry behavior in a controlled test.
C:That principle is relevant to the distinct Meraki subject of Systems Manager MDM enrollment and compliance profiles, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. Verify it through: Review response headers, per-organization request rate and retry behavior in a controlled test.
D:That principle is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Dashboard API organization rate limiting and retry requirement.
Question 728
A Meraki support engineer must distinguish facts from assumptions. An inventory script handles one network fine but overwhelms an organization when all sites start polling together. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Compare assignment rules, managed app status, device OS support and a controlled installation attempt.
- Inspect VLAN IDs, L3 gateway placement, DHCP scopes and the rule path for a representative cross-VLAN flow.
- Inspect returned Link next-page information, accumulated serial IDs and a Dashboard inventory comparison.
- Review response headers, per-organization request rate and retry behavior in a controlled test.
Explanation
Correct Answer
D:The discriminating evidence is: Review response headers, per-organization request rate and retry behavior in a controlled test. Expected result: The script backs off predictably and retrieves results without causing a persistent 429 storm.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Managed app rollout and assignment scoping, not the specific Dashboard API organization rate limiting and retry requirement.
B:That evidence is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Dashboard API organization rate limiting and retry requirement.
C:That evidence is relevant to the distinct Meraki subject of API pagination and complete inventory reconciliation, not the specific Dashboard API organization rate limiting and retry requirement.
Question 729
An implementation lead needs a measurable acceptance criterion for a Meraki change. An inventory script handles one network fine but overwhelms an organization when all sites start polling together. The proposed validation is: Review response headers, per-organization request rate and retry behavior in a controlled test. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The script backs off predictably and retrieves results without causing a persistent 429 storm.
- The service's actual policy or threat-detection cause is established and any exception is narrowly authorized.
- The engineer can perform the approved network change without obtaining unnecessary organization-wide rights.
- The requested changes reach exactly intended networks and can be reversed using recorded configuration.
Explanation
Correct Answer
A:The acceptance criterion is: The script backs off predictably and retrieves results without causing a persistent 429 storm. Verify it using: Review response headers, per-organization request rate and retry behavior in a controlled test.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific Dashboard API organization rate limiting and retry requirement.
C:That outcome is relevant to the distinct Meraki subject of Dashboard administrator authentication and least privilege, not the specific Dashboard API organization rate limiting and retry requirement.
D:That outcome is relevant to the distinct Meraki subject of Dashboard API idempotent change and preflight audit, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. Verify it through: Review response headers, per-organization request rate and retry behavior in a controlled test.
Question 730
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An inventory script handles one network fine but overwhelms an organization when all sites start polling together. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
- Review response headers, per-organization request rate and retry behavior in a controlled test.
- Correlate application response time, observed path latency/loss and affected clients over the same incident interval.
- Filter Dashboard client events to the affected endpoint and exact time instead of generalizing from unrelated network alerts.
- Check topology, port state and spanning-tree events when a switch network develops broadcast storms after recabling.
Explanation
Correct Answers
A:The targeted next step is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop.
B:The discriminating evidence is: Review response headers, per-organization request rate and retry behavior in a controlled test.
Incorrect Answers
C:That evidence is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Dashboard API organization rate limiting and retry requirement. For this scenario, the proper response is: Honor HTTP 429 and the returned Retry-After value rather than immediately retrying in a tight loop. Verify it through: Review response headers, per-organization request rate and retry behavior in a controlled test.
D:That action is relevant to the distinct Meraki subject of Dashboard client timeline and event filtering, not the specific Dashboard API organization rate limiting and retry requirement.
E:That action is relevant to the distinct Meraki subject of Layer two loop and spanning tree diagnosis, not the specific Dashboard API organization rate limiting and retry requirement.