cert
cert-1
cert-2

Pass Cisco 500-220 Exam in First Attempt Guaranteed!

Get 100% Latest Exam Questions, Accurate & Verified Answers to Pass the Actual Exam!
30 Days Free Updates, Instant Download!

cert-5
cert-6
500-220 Exam - Verified By Experts
500-220 Premium File

500-220 Premium File

$69.99
$76.99
  • Premium File 85 Questions & Answers. Last Update: Nov 13, 2026

Whats Included:

  • Latest Questions
  • 100% Accurate Answers
  • Fast Exam Updates
 
$76.99
$69.99
accept 13 downloads in the last 7 days
block-screenshots
Cisco 500-220 Practice Test 66

Question 650

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A branch WAN router reports CRC counters that climb only during afternoon traffic spikes. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Compare consecutive octet/error counter values, interface speed and timestamps from a known monitoring period.
  2. Review port classification, DSCP markings, counters and an actual call under controlled congestion.
  3. Use available SNMP interface counters and error trends with time alignment to investigate a suspected physical or congestion issue.
  4. Inspect the Site-to-site VPN topology, hub selection and route advertisements for the affected branch.
  5. Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.

Explanation

Correct Answers

A:

The discriminating evidence is: Compare consecutive octet/error counter values, interface speed and timestamps from a known monitoring period.

C:

The targeted next step is: Use available SNMP interface counters and error trends with time alignment to investigate a suspected physical or congestion issue.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of MS QoS trust and voice traffic classification, not the specific SNMP telemetry and counter interpretation requirement.

D:

That evidence is relevant to the distinct Meraki subject of Auto VPN hub-and-spoke site reachability, not the specific SNMP telemetry and counter interpretation requirement.

E:

That evidence is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific SNMP telemetry and counter interpretation requirement.

Question 651

A Cisco Meraki deployment engineer investigates this operational case: A SOC stops seeing MX security events after the syslog server IP was changed on the collector. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Interpret Dashboard WAN uplink loss, latency and throughput graphs over the same incident period.
  2. Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.
  3. Assess capacity, channel reuse, client load and interference with an RF survey before adding large numbers of MR access points.
  4. Use an authorized maintenance schedule and validate primary/secondary WAN or HA behavior for an MX firmware change.

Explanation

Correct Answer

B:

The targeted next step is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated. The technical reason is: A device may generate local events without successfully delivering them to an off-device syslog service.

Incorrect Answers

A:

That action is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Syslog event forwarding and remote collector reachability requirement. For this scenario, the proper response is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.

C:

That action is relevant to the distinct Meraki subject of High-density RF channel and AP count planning, not the specific Syslog event forwarding and remote collector reachability requirement.

D:

That action is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Syslog event forwarding and remote collector reachability requirement.

Question 652

A peer reviewer evaluates the following Meraki case. A SOC stops seeing MX security events after the syslog server IP was changed on the collector. The proposed action is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated. Which technical principle BEST supports this decision? Select ONE best answer.

  1. A device may generate local events without successfully delivering them to an off-device syslog service.
  2. An access port normally carries one untagged client VLAN while a trunk can carry explicitly permitted tagged VLANs.
  3. Bulk Meraki configuration workflows can reduce request load but need individual operation outcomes and appropriate safety gates.
  4. SNMP polling samples device counters and state, and a single absolute counter is not equivalent to a measured rate.

Explanation

Correct Answer

A:

A device may generate local events without successfully delivering them to an off-device syslog service. In this situation (A SOC stops seeing MX security events after the syslog server IP was changed on the collector.), it justifies the action: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.

Incorrect Answers

B:

That principle is relevant to the distinct Meraki subject of MS access and trunk port VLAN assignment, not the specific Syslog event forwarding and remote collector reachability requirement.

C:

That principle is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Syslog event forwarding and remote collector reachability requirement. For this scenario, the proper response is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.

D:

That principle is relevant to the distinct Meraki subject of SNMP telemetry and counter interpretation, not the specific Syslog event forwarding and remote collector reachability requirement. For this scenario, the proper response is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.

Question 653

A Meraki support engineer must distinguish facts from assumptions. A SOC stops seeing MX security events after the syslog server IP was changed on the collector. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.
  2. Review EAP method, server reachability, RADIUS reject logs and authorized test-client VLAN result.
  3. Inspect the configured collector, export transport, sampling context and observed flow keys for a controlled session.
  4. Verify one authorized managed client, one unauthorized client and their resulting VLAN and firewall policy.

Explanation

Correct Answer

A:

The discriminating evidence is: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event. Expected result: The remote collector receives the expected event with correct device and time metadata.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Syslog event forwarding and remote collector reachability requirement.

C:

That evidence is relevant to the distinct Meraki subject of NetFlow export and traffic visibility limits, not the specific Syslog event forwarding and remote collector reachability requirement.

D:

That evidence is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Syslog event forwarding and remote collector reachability requirement.

Question 654

An implementation lead needs a measurable acceptance criterion for a Meraki change. A SOC stops seeing MX security events after the syslog server IP was changed on the collector. The proposed validation is: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. The remote collector receives the expected event with correct device and time metadata.
  2. Valid clients authenticate and reach expected resources without weakening security to solve an identity issue.
  3. The investigation determines whether traffic was blocked, allowed or requires a separate host response.
  4. Clients preserve approved services after the designated active appliance fails, subject to expected reconvergence.

Explanation

Correct Answer

A:

The acceptance criterion is: The remote collector receives the expected event with correct device and time metadata. Verify it using: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event. The associated corrective action is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.

Incorrect Answers

B:

That outcome is relevant to the distinct Meraki subject of MR authentication and RADIUS reject troubleshooting, not the specific Syslog event forwarding and remote collector reachability requirement.

C:

That outcome is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Syslog event forwarding and remote collector reachability requirement.

D:

That outcome is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific Syslog event forwarding and remote collector reachability requirement.

Question 655

A Meraki operations reviewer examines this case. A SOC stops seeing MX security events after the syslog server IP was changed on the collector. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.

  1. Change the Dashboard event log search filter and assume it repairs a blocked syslog network path.
  2. Disconnect all branches whenever any low-confidence signature appears in a security dashboard.
  3. Assume a newly shipped replacement serial must always receive a fresh unrelated paid license without checking RMA linkage.
  4. Conclude an endpoint is authorized solely because its serial appears in inventory, without testing Sentry or the network security policy.

Explanation

Correct Answer

A:

It conflicts with the relevant behavior: A device may generate local events without successfully delivering them to an off-device syslog service.

Incorrect Answers

B:

That proposal is unsafe in its own context (the separate topic of Security Center incident classification from threat events), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Syslog event forwarding and remote collector reachability: Change the Dashboard event log search filter and assume it repairs a blocked syslog network path.

C:

That proposal is unsafe in its own context (the separate topic of Licensing entitlement after hardware replacement), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Syslog event forwarding and remote collector reachability: Change the Dashboard event log search filter and assume it repairs a blocked syslog network path.

D:

That proposal is unsafe in its own context (the separate topic of Systems Manager Sentry and network access integration), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Syslog event forwarding and remote collector reachability: Change the Dashboard event log search filter and assume it repairs a blocked syslog network path.

Question 656

A Cisco Meraki deployment engineer investigates this operational case: An MS switch reboots and Dashboard shows a local event while the external SIEM records nothing. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.

  1. Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.
  2. Use available SNMP interface counters and error trends with time alignment to investigate a suspected physical or congestion issue.
  3. Interpret Dashboard WAN uplink loss, latency and throughput graphs over the same incident period.
  4. Check the organization-wide co-term entitlement balance and expiration date before adding equipment with new licenses.

Explanation

Correct Answer

A:

The targeted next step is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated. The technical reason is: A device may generate local events without successfully delivering them to an off-device syslog service. A successful verification would use: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of SNMP telemetry and counter interpretation, not the specific Syslog event forwarding and remote collector reachability requirement.

C:

That action is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Syslog event forwarding and remote collector reachability requirement. For this scenario, the proper response is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated. Verify it through: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.

D:

That action is relevant to the distinct Meraki subject of Co-termination licensing compliance and common expiration, not the specific Syslog event forwarding and remote collector reachability requirement.

Question 657

A peer reviewer evaluates the following Meraki case. An MS switch reboots and Dashboard shows a local event while the external SIEM records nothing. The proposed action is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated. Which technical principle BEST supports this decision? Select ONE best answer.

  1. Performance classes express acceptable loss, latency and jitter criteria for path evaluation; one generic metric may not fit voice and backup equally.
  2. Flow records summarize traffic metadata and do not provide complete application payloads or prove every packet's contents.
  3. A device may generate local events without successfully delivering them to an off-device syslog service.
  4. 802.1X depends on an authenticator, supplicant and authentication server; successful physical association alone is not authorization.

Explanation

Correct Answer

C:

A device may generate local events without successfully delivering them to an off-device syslog service. In this situation (An MS switch reboots and Dashboard shows a local event while the external SIEM records nothing.), it justifies the action: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.

Incorrect Answers

A:

That principle is relevant to the distinct Meraki subject of Performance-class loss latency and jitter thresholds, not the specific Syslog event forwarding and remote collector reachability requirement.

B:

That principle is relevant to the distinct Meraki subject of NetFlow export and traffic visibility limits, not the specific Syslog event forwarding and remote collector reachability requirement.

D:

That principle is relevant to the distinct Meraki subject of RADIUS and 802.1X network access design, not the specific Syslog event forwarding and remote collector reachability requirement.

Question 658

A Meraki support engineer must distinguish facts from assumptions. An MS switch reboots and Dashboard shows a local event while the external SIEM records nothing. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.

  1. Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.
  2. Review event action, source/destination, signature or category and corroborating endpoint logs.
  3. Compare selected organization, networks, time period, report recipients and raw Dashboard activity for a known date.
  4. Review the admin role assignment, target organization and a read-only test of the relevant page.

Explanation

Correct Answer

A:

The discriminating evidence is: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event. Expected result: The remote collector receives the expected event with correct device and time metadata.

Incorrect Answers

B:

That evidence is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Syslog event forwarding and remote collector reachability requirement.

C:

That evidence is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific Syslog event forwarding and remote collector reachability requirement.

D:

That evidence is relevant to the distinct Meraki subject of Dashboard administrator authentication and least privilege, not the specific Syslog event forwarding and remote collector reachability requirement.

Question 659

An implementation lead needs a measurable acceptance criterion for a Meraki change. An MS switch reboots and Dashboard shows a local event while the external SIEM records nothing. The proposed validation is: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.

  1. The incident report identifies the affected service, time and impact with repeatable supporting evidence.
  2. Authorized managed clients connect with correct identity and network rights; unauthorized clients do not.
  3. Employees join the correct protected network while unauthorized endpoints are denied or placed safely.
  4. The remote collector receives the expected event with correct device and time metadata.

Explanation

Correct Answer

D:

The acceptance criterion is: The remote collector receives the expected event with correct device and time metadata. Verify it using: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.

Incorrect Answers

A:

That outcome is relevant to the distinct Meraki subject of Dashboard alerts versus actual incident evidence, not the specific Syslog event forwarding and remote collector reachability requirement.

B:

That outcome is relevant to the distinct Meraki subject of MR corporate SSID with WPA enterprise authentication, not the specific Syslog event forwarding and remote collector reachability requirement.

C:

That outcome is relevant to the distinct Meraki subject of Enterprise SSID design for authentication and segmentation, not the specific Syslog event forwarding and remote collector reachability requirement.

Question 660

A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. An MS switch reboots and Dashboard shows a local event while the external SIEM records nothing. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.

  1. Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.
  2. Identify whether an Auto VPN failure is tunnel establishment, advertised routing or policy enforcement.
  3. Verify model and firmware feature support before applying a setting copied from a different Meraki platform.
  4. Review app assignment, affected device tags, installation report and a reference endpoint test.
  5. Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.

Explanation

Correct Answers

A:

The targeted next step is: Verify configured syslog event categories, remote collector reachability and timestamp alignment before concluding logs were never generated.

E:

The discriminating evidence is: Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.

Incorrect Answers

B:

That action is relevant to the distinct Meraki subject of Auto VPN peer tunnel health and route advertisement, not the specific Syslog event forwarding and remote collector reachability requirement.

C:

That action is relevant to the distinct Meraki subject of Firmware version differences and configuration feature support, not the specific Syslog event forwarding and remote collector reachability requirement.

D:

That evidence is relevant to the distinct Meraki subject of Systems Manager application deployment and tag scope, not the specific Syslog event forwarding and remote collector reachability requirement.

Cisco Meraki Solutions Specialist (500-220) Practice Tests