Cisco 500-220 Practice Test 2
Question 10
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A newly installed MR broadcasts its configured SSID but never appears online after a branch perimeter ACL update. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
- Compare partner endpoint, supported IPsec proposals, subnets and route policies with the native VPN topology.
- Review warm-spare status, monitoring, cabling topology and controlled failure events before calling the design redundant.
- Inspect approved maintenance settings, stack member upgrade state and representative PoE/VLAN client recovery.
- Validate the device's management network DNS, gateway and permitted outbound cloud connectivity before changing user firewall rules.
Explanation
Correct Answers
A:The discriminating evidence is: Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
E:The targeted next step is: Validate the device's management network DNS, gateway and permitted outbound cloud connectivity before changing user firewall rules. The technical reason is: Cloud-managed hardware requires a working management path to its regional Dashboard services; unrelated user-plane reachability is not proof of successful check-in. A successful verification would use: Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Non-Meraki peer versus native Auto VPN compatibility, not the specific Meraki device check-in requirements and upstream firewall rules requirement.
C:That evidence is relevant to the distinct Meraki subject of MX high availability warm spare and uplink failover, not the specific Meraki device check-in requirements and upstream firewall rules requirement.
D:That evidence is relevant to the distinct Meraki subject of MS firmware and switch stack sequencing, not the specific Meraki device check-in requirements and upstream firewall rules requirement.
Question 11
A Cisco Meraki deployment engineer investigates this operational case: A hospital expansion proposal uses two MR access points but omits the device that must terminate its routed broadband WAN. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Verify both forward and return paths between Auto VPN sites and cloud workloads rather than checking only IKE state.
- Create and validate supported MS L3 interfaces for a routed distribution role rather than relying on Layer-2 MAC learning.
- Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
- Validate the device's management network DNS, gateway and permitted outbound cloud connectivity before changing user firewall rules.
Explanation
Correct Answer
C:The targeted next step is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses. The technical reason is: Meraki product families have different forwarding and management purposes; an AP cannot replace the security appliance's routed WAN function by itself.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of vMX traffic symmetry and cloud return routing, not the specific Product family capabilities and integrated Dashboard view requirement.
B:That action is relevant to the distinct Meraki subject of MS switch routing interface and L3 reachability, not the specific Product family capabilities and integrated Dashboard view requirement.
D:That action is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Product family capabilities and integrated Dashboard view requirement.
Question 12
A peer reviewer evaluates the following Meraki case. A hospital expansion proposal uses two MR access points but omits the device that must terminate its routed broadband WAN. The proposed action is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses. Which technical principle BEST supports this decision? Select ONE best answer.
- Meraki product families have different forwarding and management purposes; an AP cannot replace the security appliance's routed WAN function by itself.
- An authorized local status page can expose limited LAN or uplink information; it is not a complete replacement for cloud policy management.
- Cloud-managed hardware requires a working management path to its regional Dashboard services; unrelated user-plane reachability is not proof of successful check-in.
- An MX can supply LAN VLAN interfaces and address service where supported; an IP conflict or wrong gateway breaks local network communication.
Explanation
Correct Answer
A:Meraki product families have different forwarding and management purposes; an AP cannot replace the security appliance's routed WAN function by itself. In this situation (A hospital expansion proposal uses two MR access points but omits the device that must terminate its routed broadband WAN.), it justifies the action: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
Incorrect Answers
B:That principle is relevant to the distinct Meraki subject of Local status page versus cloud Dashboard troubleshooting, not the specific Product family capabilities and integrated Dashboard view requirement.
C:That principle is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Product family capabilities and integrated Dashboard view requirement. For this scenario, the proper response is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
D:That principle is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific Product family capabilities and integrated Dashboard view requirement.
Question 13
A Meraki support engineer must distinguish facts from assumptions. A hospital expansion proposal uses two MR access points but omits the device that must terminate its routed broadband WAN. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect port topology, spanning-tree status, MAC flapping and broadcast utilization during the event.
- Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
- Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
- Compare scheduled window, appliance upgrade status, VPN tunnel restoration and application tests after reboot.
Explanation
Correct Answer
C:The discriminating evidence is: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs. Expected result: The design assigns wireless, switching, security, camera, endpoint and application monitoring tasks to suitable components.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Layer two loop and spanning tree diagnosis, not the specific Product family capabilities and integrated Dashboard view requirement.
B:That evidence is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Product family capabilities and integrated Dashboard view requirement. For this scenario, the proper response is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
D:That evidence is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Product family capabilities and integrated Dashboard view requirement.
Question 14
An implementation lead needs a measurable acceptance criterion for a Meraki change. A hospital expansion proposal uses two MR access points but omits the device that must terminate its routed broadband WAN. The proposed validation is: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The affected client VLAN is carried end-to-end and receives the intended address and network access.
- The design assigns wireless, switching, security, camera, endpoint and application monitoring tasks to suitable components.
- New access ports match the approved role while exceptional trunk and security settings remain correct.
- The incident distinguishes management-plane loss from a genuine data-plane interruption without resetting healthy user links.
Explanation
Correct Answer
B:The acceptance criterion is: The design assigns wireless, switching, security, camera, endpoint and application monitoring tasks to suitable components. Verify it using: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of VLAN trunk mismatch and missing DHCP across MS links, not the specific Product family capabilities and integrated Dashboard view requirement.
C:That outcome is relevant to the distinct Meraki subject of MS configuration templates and switch port cloning, not the specific Product family capabilities and integrated Dashboard view requirement.
D:That outcome is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific Product family capabilities and integrated Dashboard view requirement. For this scenario, the proper response is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
Question 15
A Meraki operations reviewer examines this case. A hospital expansion proposal uses two MR access points but omits the device that must terminate its routed broadband WAN. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Force every older 2.4 GHz-only scanner to join a 6 GHz-only SSID by changing its profile name.
- Place the same IPv4 gateway address on two unrelated VLAN interfaces and expect unambiguous routing.
- Open every inbound Internet port to the access switch merely to repair outbound cloud check-in.
- Specify an MV camera as a substitute for a WAN firewall because both can be viewed in Dashboard.
Explanation
Correct Answer
D:It conflicts with the relevant behavior: Meraki product families have different forwarding and management purposes; an AP cannot replace the security appliance's routed WAN function by itself.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of MR RF profile and band planning across device generations), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Product family capabilities and integrated Dashboard view: Specify an MV camera as a substitute for a WAN firewall because both can be viewed in Dashboard.
B:That proposal is unsafe in its own context (the separate topic of MX VLAN interfaces and DHCP configuration), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Product family capabilities and integrated Dashboard view: Specify an MV camera as a substitute for a WAN firewall because both can be viewed in Dashboard.
C:That proposal is unsafe in its own context (the separate topic of Meraki device check-in requirements and upstream firewall rules), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Product family capabilities and integrated Dashboard view: Specify an MV camera as a substitute for a WAN firewall because both can be viewed in Dashboard.
Question 16
A Cisco Meraki deployment engineer investigates this operational case: A campus requests endpoint management and network camera alerts while a design only provisions MS switches and assumes they supply every service. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Review the change history and intended template state when a branch differs from its standard design.
- Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
- Check device uplink and cloud reachability separately from local LAN forwarding before declaring a Meraki switch offline to users.
- Design primary and secondary hub paths with explicit reachability and failover tests rather than relying on a single WAN site.
Explanation
Correct Answer
B:The targeted next step is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses. The technical reason is: Meraki product families have different forwarding and management purposes; an AP cannot replace the security appliance's routed WAN function by itself. A successful verification would use: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Product family capabilities and integrated Dashboard view requirement.
C:That action is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific Product family capabilities and integrated Dashboard view requirement.
D:That action is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific Product family capabilities and integrated Dashboard view requirement.
Question 17
A peer reviewer evaluates the following Meraki case. A campus requests endpoint management and network camera alerts while a design only provisions MS switches and assumes they supply every service. The proposed action is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses. Which technical principle BEST supports this decision? Select ONE best answer.
- Firmware upgrades may trigger device restart or service interruption despite redundant link designs; the change needs tested mitigation.
- Cloud-managed hardware requires a working management path to its regional Dashboard services; unrelated user-plane reachability is not proof of successful check-in.
- SSID shaping manages matching client traffic but does not create extra RF airtime or remove upstream ISP bottlenecks.
- Meraki product families have different forwarding and management purposes; an AP cannot replace the security appliance's routed WAN function by itself.
Explanation
Correct Answer
D:Meraki product families have different forwarding and management purposes; an AP cannot replace the security appliance's routed WAN function by itself. In this situation (A campus requests endpoint management and network camera alerts while a design only provisions MS switches and assumes they supply every service.), it justifies the action: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of MX firmware scheduled maintenance and WAN failover, not the specific Product family capabilities and integrated Dashboard view requirement.
B:That principle is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Product family capabilities and integrated Dashboard view requirement. For this scenario, the proper response is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses. Verify it through: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
C:That principle is relevant to the distinct Meraki subject of MR SSID traffic shaping for application bandwidth, not the specific Product family capabilities and integrated Dashboard view requirement.
Question 18
A Meraki support engineer must distinguish facts from assumptions. A campus requests endpoint management and network camera alerts while a design only provisions MS switches and assumes they supply every service. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Review the device's local status page, DNS resolution, uplink gateway and upstream security logs for cloud sessions.
- Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration.
- Compare alert history, device online status and matching client or uplink events during the incident window.
- Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
Explanation
Correct Answer
D:The discriminating evidence is: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs. Expected result: The design assigns wireless, switching, security, camera, endpoint and application monitoring tasks to suitable components.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Meraki device check-in requirements and upstream firewall rules, not the specific Product family capabilities and integrated Dashboard view requirement. For this scenario, the proper response is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses. Verify it through: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
B:That evidence is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Product family capabilities and integrated Dashboard view requirement.
C:That evidence is relevant to the distinct Meraki subject of Dashboard alerts versus actual incident evidence, not the specific Product family capabilities and integrated Dashboard view requirement.
Question 19
An implementation lead needs a measurable acceptance criterion for a Meraki change. A campus requests endpoint management and network camera alerts while a design only provisions MS switches and assumes they supply every service. The proposed validation is: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The design assigns wireless, switching, security, camera, endpoint and application monitoring tasks to suitable components.
- The incident distinguishes management-plane loss from a genuine data-plane interruption without resetting healthy user links.
- Guest streaming stays bounded while staff applications remain responsive within actual network capacity.
- Guest endpoints stay isolated while authorized staff reach only specified internal resources.
Explanation
Correct Answer
A:The acceptance criterion is: The design assigns wireless, switching, security, camera, endpoint and application monitoring tasks to suitable components. Verify it using: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs. The associated corrective action is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of Dashboard cloud control plane versus local packet forwarding, not the specific Product family capabilities and integrated Dashboard view requirement. For this scenario, the proper response is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses. Verify it through: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
C:That outcome is relevant to the distinct Meraki subject of MR SSID traffic shaping for application bandwidth, not the specific Product family capabilities and integrated Dashboard view requirement.
D:That outcome is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Product family capabilities and integrated Dashboard view requirement.
Question 20
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A campus requests endpoint management and network camera alerts while a design only provisions MS switches and assumes they supply every service. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
- Review action-batch status, failed operations, resulting template bindings and a sample target configuration.
- Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
- Inspect MX Site-to-site VPN settings, remote learned routes and a representative permitted inter-site connection.
- Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
Explanation
Correct Answers
C:The discriminating evidence is: Map the topology's role requirements to device inventory, physical uplinks and Dashboard product tabs.
E:The targeted next step is: Match the requested function to the appropriate MX, MS, MR, MV, SM or MI role before selecting equipment or licenses.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific Product family capabilities and integrated Dashboard view requirement.
B:That evidence is relevant to the distinct Meraki subject of Action batches and template-based API efficiency, not the specific Product family capabilities and integrated Dashboard view requirement.
D:That evidence is relevant to the distinct Meraki subject of MX Auto VPN participation for selected VLANs, not the specific Product family capabilities and integrated Dashboard view requirement.