Cisco 500-220 Practice Test 11
Question 100
A Meraki operations team is preparing an evidence-based incident resolution plan. A technician enters a replacement MR serial and sees a license warning despite having an existing covered device to retire. Which THREE measures together provide the required action, verifying evidence, and acceptable outcome? Select THREE answers.
- Compare configured VLAN ID, interface address, DHCP scope and one client's lease and gateway reachability.
- Inspect matched security event, source/destination, detected signature and a safe isolated reproduction.
- The replacement is managed under the proper entitlement without leaving an unauthorized duplicate inventory entry.
- Review camera online status, playback retention, motion-event rule and destination notification settings.
- Audit claimed hardware and license entitlement when an RMA device is swapped instead of creating a duplicate charge by assumption.
- Compare old and replacement serial numbers, inventory state, Dashboard license status and authorized vendor RMA documentation.
Explanation
Correct Answers
C:The acceptance criterion is: The replacement is managed under the proper entitlement without leaving an unauthorized duplicate inventory entry.
E:The targeted next step is: Audit claimed hardware and license entitlement when an RMA device is swapped instead of creating a duplicate charge by assumption.
F:The discriminating evidence is: Compare old and replacement serial numbers, inventory state, Dashboard license status and authorized vendor RMA documentation.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of MX VLAN interfaces and DHCP configuration, not the specific Licensing entitlement after hardware replacement requirement.
B:That evidence is relevant to the distinct Meraki subject of Security Center threat event investigation and false positive, not the specific Licensing entitlement after hardware replacement requirement.
D:That evidence is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific Licensing entitlement after hardware replacement requirement.
Question 101
A Cisco Meraki deployment engineer investigates this operational case: A retailer is opening eight branches and needs to stage switch inventories before local technicians connect WAN circuits. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Check report scope, date range, timezone and included networks before comparing historical usage summaries.
- Use a small controlled pilot with documented acceptance checks before rolling an organization-wide Meraki configuration change.
- Distinguish a delayed upgrade from a failed upgrade and follow supported recovery and escalation steps rather than manual image tampering.
- Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
Explanation
Correct Answer
D:The targeted next step is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation. The technical reason is: Centralized claim and network configuration can precede physical device arrival, but incorrect assignment can deploy the wrong policy.
Incorrect Answers
A:That action is relevant to the distinct Meraki subject of Scheduled dashboard reports and audit interpretation, not the specific Bulk device claim and zero-touch staging requirement.
B:That action is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Bulk device claim and zero-touch staging requirement.
C:That action is relevant to the distinct Meraki subject of Upgrade failure and rollback escalation, not the specific Bulk device claim and zero-touch staging requirement.
Question 102
A peer reviewer evaluates the following Meraki case. A retailer is opening eight branches and needs to stage switch inventories before local technicians connect WAN circuits. The proposed action is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation. Which technical principle BEST supports this decision? Select ONE best answer.
- Organization and network administrator privileges are not equivalent; authenticating to Dashboard alone does not imply permission to edit all networks.
- Centralized claim and network configuration can precede physical device arrival, but incorrect assignment can deploy the wrong policy.
- Auto VPN is a Meraki-managed feature within an organization; third-party peers require separately supported VPN configuration and negotiated parameters.
- Deployment success requires both the intended Dashboard configuration and observed endpoint traffic, not just a green device tile.
Explanation
Correct Answer
B:Centralized claim and network configuration can precede physical device arrival, but incorrect assignment can deploy the wrong policy. In this situation (A retailer is opening eight branches and needs to stage switch inventories before local technicians connect WAN circuits.), it justifies the action: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of Dashboard administrator authentication and least privilege, not the specific Bulk device claim and zero-touch staging requirement.
C:That principle is relevant to the distinct Meraki subject of Non-Meraki peer versus native Auto VPN compatibility, not the specific Bulk device claim and zero-touch staging requirement.
D:That principle is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Bulk device claim and zero-touch staging requirement.
Question 103
A Meraki support engineer must distinguish facts from assumptions. A retailer is opening eight branches and needs to stage switch inventories before local technicians connect WAN circuits. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration.
- Compare template binding state, site-specific subnet variables and the network configuration change history.
- Audit network role assignments and test event viewing separately from actual change permissions.
- Check SSID security, RADIUS events, successful EAP exchange and the associated client VLAN.
Explanation
Correct Answer
A:The discriminating evidence is: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration. Expected result: The staged units appear in the intended network and receive only the approved local configuration after check-in.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific Bulk device claim and zero-touch staging requirement.
C:That evidence is relevant to the distinct Meraki subject of Network-level privileges and separation of duties, not the specific Bulk device claim and zero-touch staging requirement.
D:That evidence is relevant to the distinct Meraki subject of MR corporate SSID with WPA enterprise authentication, not the specific Bulk device claim and zero-touch staging requirement.
Question 104
An implementation lead needs a measurable acceptance criterion for a Meraki change. A retailer is opening eight branches and needs to stage switch inventories before local technicians connect WAN circuits. The proposed validation is: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The investigation distinguishes WAN degradation from application-server delays with supporting measurements.
- The branch receives shared security settings while retaining its correct local VLAN and addressing requirements.
- Guest endpoints stay isolated while authorized staff reach only specified internal resources.
- The staged units appear in the intended network and receive only the approved local configuration after check-in.
Explanation
Correct Answer
D:The acceptance criterion is: The staged units appear in the intended network and receive only the approved local configuration after check-in. Verify it using: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration.
Incorrect Answers
A:That outcome is relevant to the distinct Meraki subject of Meraki Insight application health and WAN visibility, not the specific Bulk device claim and zero-touch staging requirement.
B:That outcome is relevant to the distinct Meraki subject of Configuration templates and network binding, not the specific Bulk device claim and zero-touch staging requirement.
C:That outcome is relevant to the distinct Meraki subject of Network segmentation with VLANs and routed boundaries, not the specific Bulk device claim and zero-touch staging requirement.
Question 105
A Meraki operations reviewer examines this case. A retailer is opening eight branches and needs to stage switch inventories before local technicians connect WAN circuits. Which assumption is the MOST DIRECTLY relevant unsafe or technically wrong shortcut to reject here? Select ONE best answer.
- Force every site to use an identical overlapping LAN subnet merely because all are template-bound.
- Specify an MV camera as a substitute for a WAN firewall because both can be viewed in Dashboard.
- Silently enroll privately owned phones as organization-supervised devices with full wipe rights regardless of policy.
- Claim a large unverified serial list into the production organization without matching the purchase order.
Explanation
Correct Answer
D:It conflicts with the relevant behavior: Centralized claim and network configuration can precede physical device arrival, but incorrect assignment can deploy the wrong policy.
Incorrect Answers
A:That proposal is unsafe in its own context (the separate topic of Configuration templates and network binding), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Bulk device claim and zero-touch staging: Claim a large unverified serial list into the production organization without matching the purchase order.
B:That proposal is unsafe in its own context (the separate topic of Product family capabilities and integrated Dashboard view), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Bulk device claim and zero-touch staging: Claim a large unverified serial list into the production organization without matching the purchase order.
C:That proposal is unsafe in its own context (the separate topic of Systems Manager managed enrollment versus BYOD privacy), but it is not the shortcut tied most directly to this incident. The case-specific fault to reject concerns Bulk device claim and zero-touch staging: Claim a large unverified serial list into the production organization without matching the purchase order.
Question 106
A Cisco Meraki deployment engineer investigates this operational case: A warehouse orders new MR units and wants them provisioned before unpacking, while serial records contain one device for another tenant. What is the most appropriate FIRST action to address the stated requirement? Select ONE best answer.
- Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
- Check supported NetFlow export configuration and collector reception before equating flow data with full packet captures.
- Audit claimed hardware and license entitlement when an RMA device is swapped instead of creating a duplicate charge by assumption.
- Review the change history and intended template state when a branch differs from its standard design.
Explanation
Correct Answer
A:The targeted next step is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation. The technical reason is: Centralized claim and network configuration can precede physical device arrival, but incorrect assignment can deploy the wrong policy. A successful verification would use: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration.
Incorrect Answers
B:That action is relevant to the distinct Meraki subject of NetFlow export and traffic visibility limits, not the specific Bulk device claim and zero-touch staging requirement.
C:That action is relevant to the distinct Meraki subject of Licensing entitlement after hardware replacement, not the specific Bulk device claim and zero-touch staging requirement.
D:That action is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Bulk device claim and zero-touch staging requirement. For this scenario, the proper response is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
Question 107
A peer reviewer evaluates the following Meraki case. A warehouse orders new MR units and wants them provisioned before unpacking, while serial records contain one device for another tenant. The proposed action is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation. Which technical principle BEST supports this decision? Select ONE best answer.
- Uplink traffic volume and path-quality indicators are different metrics; high utilization alone does not prove packet loss.
- Manual overrides and template changes can produce drift that must be identified against a recorded baseline.
- Centralized claim and network configuration can precede physical device arrival, but incorrect assignment can deploy the wrong policy.
- An IDS alert, blocked attempt and confirmed endpoint compromise are different evidence levels; category or severity alone is not proof of infection.
Explanation
Correct Answer
C:Centralized claim and network configuration can precede physical device arrival, but incorrect assignment can deploy the wrong policy. In this situation (A warehouse orders new MR units and wants them provisioned before unpacking, while serial records contain one device for another tenant.), it justifies the action: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
Incorrect Answers
A:That principle is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Bulk device claim and zero-touch staging requirement.
B:That principle is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Bulk device claim and zero-touch staging requirement.
D:That principle is relevant to the distinct Meraki subject of Security Center incident classification from threat events, not the specific Bulk device claim and zero-touch staging requirement.
Question 108
A Meraki support engineer must distinguish facts from assumptions. A warehouse orders new MR units and wants them provisioned before unpacking, while serial records contain one device for another tenant. Which diagnostic observation MOST DIRECTLY verifies the problem or requirement? Select ONE best answer.
- Inspect Dashboard configuration changes for the affected network and compare with the approved template configuration.
- Compare configured hub priority, advertised networks and tunnel state during a controlled primary-hub outage.
- Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration.
- Compare a pilot's device online status, gateway route, VLAN reachability and a change log with rollback plan.
Explanation
Correct Answer
C:The discriminating evidence is: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration. Expected result: The staged units appear in the intended network and receive only the approved local configuration after check-in.
Incorrect Answers
A:That evidence is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Bulk device claim and zero-touch staging requirement.
B:That evidence is relevant to the distinct Meraki subject of Multi-hub Auto VPN resiliency and routing preference, not the specific Bulk device claim and zero-touch staging requirement.
D:That evidence is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Bulk device claim and zero-touch staging requirement.
Question 109
An implementation lead needs a measurable acceptance criterion for a Meraki change. A warehouse orders new MR units and wants them provisioned before unpacking, while serial records contain one device for another tenant. The proposed validation is: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration. Which result BEST demonstrates that the intended requirement is satisfied? Select ONE best answer.
- The staged units appear in the intended network and receive only the approved local configuration after check-in.
- The rollout is promoted only after the representative pilot validates the required user paths and management state.
- Required video evidence remains accessible and alerts fire only for the intended conditions.
- Corporate devices receive required controls without imposing unsupported device-owner privileges on personal devices.
Explanation
Correct Answer
A:The acceptance criterion is: The staged units appear in the intended network and receive only the approved local configuration after check-in. Verify it using: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration. The associated corrective action is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
Incorrect Answers
B:That outcome is relevant to the distinct Meraki subject of Deployment validation and change evidence, not the specific Bulk device claim and zero-touch staging requirement.
C:That outcome is relevant to the distinct Meraki subject of MV smart camera video availability and alert settings, not the specific Bulk device claim and zero-touch staging requirement.
D:That outcome is relevant to the distinct Meraki subject of Systems Manager managed enrollment versus BYOD privacy, not the specific Bulk device claim and zero-touch staging requirement.
Question 110
A Cisco Meraki deployment engineer must choose a safe configuration decision and one validating observation. A warehouse orders new MR units and wants them provisioned before unpacking, while serial records contain one device for another tenant. Which TWO steps together provide a targeted response with objective verification? Select TWO answers.
- Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
- Compare primary and secondary uplink graphs, observed ping loss and application errors across aligned timestamps.
- Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration.
- Compare the Dashboard configured syslog destination, network reachability and a uniquely triggered sample event.
- Review the change history and intended template state when a branch differs from its standard design.
Explanation
Correct Answers
A:The targeted next step is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation.
C:The discriminating evidence is: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration.
Incorrect Answers
B:That evidence is relevant to the distinct Meraki subject of WAN uplink performance graphs and loss baselines, not the specific Bulk device claim and zero-touch staging requirement.
D:That evidence is relevant to the distinct Meraki subject of Syslog event forwarding and remote collector reachability, not the specific Bulk device claim and zero-touch staging requirement.
E:That action is relevant to the distinct Meraki subject of Template drift and configuration audit, not the specific Bulk device claim and zero-touch staging requirement. For this scenario, the proper response is: Claim the verified device serials into the correct organization and pre-stage the network settings before field installation. Verify it through: Cross-check purchase order serials, destination network, switch port mapping and post-check-in configuration.