Practice Exams:

Cisco

Cisco 350-401: QoS Queuing and Marking Decisions

Home/Cisco 350-401: QoS Queuing and Marking DecisionsOn this pageFind the actual congestion pointDefine traffic classes from application behaviorPlace a defensible trust boundaryDistinguish queueing, shaping and policingObserve what happens under a reproducible loadLink the policy to enterprise operational goalsQuality of Service determines how a network behaves when more traffic arrives than a forwarding resource can handle. Without congestion, competing applications may appear equally healthy; under load, queues fill, latency rises and packets can be discarded. QoS cannot create bandwidth, but classification, marking, queueing and traffic-conditioning policies can make scarce capacity behave…

Read More

Cisco 350-401: Cisco pyATS for Network Validation

Home/Cisco 350-401: Cisco pyATS for Network ValidationOn this pageStart with a specific network invariantUse a controlled testbed and structured parsersTake baseline and post-change snapshots carefullyTest failure and recoveryMake verification part of the change contractNetwork automation is incomplete if it can push a configuration but cannot show whether the network still behaves correctly. Cisco pyATS, together with Genie parsers and device models, supports a validation workflow that compares intended outcomes with observed device state. The goal is not to automate screenshots of successful commands. It is to define what must remain…

Read More

Cisco 350-401: gNMI Telemetry for Cisco Networks

Home/Cisco 350-401: gNMI Telemetry for Cisco NetworksOn this pageChoose the question before choosing a YANG pathUnderstand sampled and on-change collectionDistinguish subscription direction and transport securityValidate the pipeline with a deliberately observable eventTranslate telemetry into network assuranceModel-driven telemetry changes network monitoring from repeatedly scraping unstructured CLI output to consuming structured values that a device publishes according to a subscription. gNMI is one interface for retrieving and subscribing to model-defined state, but enabling a stream is not the same as building reliable observability. The collector must know which paths exist, when values…

Read More

Cisco 350-401: Cisco SD-WAN Control and Data Planes

Home/Cisco 350-401: Cisco SD-WAN Control and Data PlanesOn this pageManagement, control, and data planes answer different questionsTrace routes across planesVerify the data path independently of control adjacencyIsolate control-plane failuresConnect architectural knowledge to operational decisionsCisco Catalyst SD-WAN separates the decisions that build a network overlay from the application packets that traverse it. An edge device may look healthy in an inventory screen yet be missing routes, peers, or a usable encrypted path. Troubleshooting becomes faster when an engineer distinguishes the management, control, and data planes and asks a different evidence question…

Read More

Cisco 350-401: Cisco Catalyst Center Assurance Workflows

Home/Cisco 350-401: Cisco Catalyst Center Assurance WorkflowsOn this pageBegin with the user symptom and its scopeRead device and client health as supporting evidenceCorrelate changes and events without assuming causationCross-check the dashboard against device-level stateVerify the fix where the user experiences itCisco Catalyst Center Assurance can help an operations team connect user symptoms with device, client and network-service evidence, but a health score is a starting point for investigation rather than a diagnosis. A client may appear healthy while a particular application fails, or a device may show a warning that…

Read More

Cisco 350-401: BGP Path Selection in Practice

Home/Cisco 350-401: BGP Path Selection in PracticeOn this pageEstablish which routes are actually eligibleRead attributes in policy contextWork through a reproducible exampleChange only the policy that owns the decisionTurn the best-path algorithm into operational evidenceBGP path selection is a policy decision performed on a set of eligible routes, not a promise that the path with the lowest latency will win. A router may receive several paths to the same prefix through different neighbors; attributes, route policies and implementation rules determine which one becomes the selected route. Engineers can spend hours…

Read More

Cisco 200-301: Wireless LAN Controllers

Home/Certifications/Cisco 200 301 Wireless Lan ControllersNetworking & CertificationsApplied skills and troubleshootingA wireless LAN controller sits between radio access and network policy. Access points provide the RF interface that clients actually hear, but the controller coordinates WLAN definitions, authentication and policy relationships, AP configuration, mobility behavior, telemetry, and operational state. That division of labor is why a wireless outage can look like a radio problem, a controller problem, an authentication problem, or a wired-network problem depending on where the path fails.On this pageThe controller defines policy while access points provide radio…

Read More

Cisco 200-301: VLAN Trunks Without Native VLAN Confusion

Home/Certifications/Cisco 200 301 Vlan Trunks Without Native Vlan ConfusionNetworking & CertificationsApplied skills and troubleshootingAn 802.1Q trunk can be operationally up and still be wrong. The interfaces may negotiate or be forced into trunking mode, yet one side can carry a VLAN the other side does not allow, assign untagged traffic to a different native VLAN, or disagree about how an attached device should tag frames. These failures are confusing because link state looks healthy while only selected users or services break.On this pageA trunk carries many VLANs, but each frame…

Read More

Cisco 200-301: Network Automation with RESTCONF

Home/Certifications/Cisco 200 301 Network Automation With RestconfNetworking & CertificationsApplied skills and troubleshootingRESTCONF gives network automation a structured way to read and change Cisco IOS XE configuration and operational data. Instead of parsing command-line text whose spacing and wording can vary, an automation client works with resources defined by YANG models and exchanges structured JSON or XML over HTTPS. That makes the interface easier to validate in code, but it does not make every automation safe by default. The engineering challenge is still deciding what state should exist, what data proves…

Read More

Cisco 200-301: NAT Troubleshooting on Cisco Routers

Home/Certifications/Cisco 200 301 Nat Troubleshooting On Cisco RoutersNetworking & CertificationsApplied skills and troubleshootingNetwork Address Translation often gets blamed whenever private-addressed clients cannot reach an external service, but NAT is only one decision in the packet path. A Cisco router first needs the expected route, the correct inside and outside interface roles, and a translation rule that actually matches the packet. The return flow then has to reach the router and map back to the original host. Troubleshooting becomes much faster when those conditions are checked in order instead of repeatedly…

Read More

Cisco 200-301: Inter-VLAN Routing Design Choices

Home/Certifications/Cisco 200 301 Inter Vlan Routing Design ChoicesNetworking & CertificationsApplied skills and troubleshootingVLANs create separate Layer 2 broadcast domains. Devices in different VLANs therefore need a Layer 3 function to communicate. That function can live on an external router, a multilayer switch, a firewall, or another routed platform, and the best choice depends on scale, throughput, policy, redundancy, and operational simplicity. Inter-VLAN routing is not only a configuration task; it is a design decision about where subnet gateways and security boundaries should live.On this pageRouter-on-a-stick is simple but concentrates trafficLayer…

Read More

Cisco 200-301: IPv6 Neighbor Discovery

Home/Certifications/Cisco 200 301 Ipv6 Neighbor DiscoveryNetworking & CertificationsApplied skills and troubleshootingIPv6 Neighbor Discovery is the collection of ICMPv6 mechanisms that lets nodes discover routers, resolve neighboring link-layer addresses, detect duplicate addresses, learn prefixes, and determine whether nearby nodes remain reachable. It fills several roles that IPv4 networks split across ARP, router discovery, and other mechanisms. Because so much basic IPv6 behavior depends on Neighbor Discovery, filtering or misinterpreting ICMPv6 can break connectivity in ways that are not obvious from the IP address alone.On this pageNeighbor Discovery uses ICMPv6 as normal…

Read More

Cisco 200-301: EtherChannel Troubleshooting in Practice

Home/Certifications/Cisco 200 301 Etherchannel Troubleshooting In PracticeNetworking & CertificationsApplied skills and troubleshootingEtherChannel combines multiple physical Ethernet links into one logical port-channel so the network can use aggregate bandwidth and retain connectivity when an individual member fails. The concept is straightforward; troubleshooting becomes difficult when the logical interface is up but one member is suspended, configuration differs across links, LACP negotiation is incomplete, or traffic distribution makes a healthy bundle look unbalanced. A port-channel can remain operational while one member is suspended or overloaded, so interface-up status alone is insufficient. Read…

Read More

Cisco 200-301: DHCP Snooping and Dynamic ARP Inspection

Home/Certifications/Cisco 200 301 Dhcp Snooping And Dynamic Arp InspectionNetworking & CertificationsApplied skills and troubleshootingDHCP snooping and Dynamic ARP Inspection protect a switched network by giving the switch more context about which IP-to-MAC relationships it should trust. DHCP snooping controls where DHCP server messages may enter and builds a binding database from legitimate address assignments. Dynamic ARP Inspection can then use those bindings to validate ARP traffic on untrusted ports. The two features are closely related, but each has its own trust decisions and failure modes.On this pageDHCP snooping decides which…

Read More

Cisco 200-301: ACL Order and Implicit Deny

Home/Certifications/Cisco 200 301 Acl Order And Implicit DenyNetworking & CertificationsApplied skills and troubleshootingAn IPv4 access control list is simple in concept: compare a packet with a series of conditions and permit or deny it. The operational difficulty comes from sequence. Cisco IOS evaluates access control entries from top to bottom, stops at the first match, and treats traffic that reaches the end without a match as denied. That combination means two ACLs containing the same statements can behave differently when the statements are arranged differently.On this pageFirst match wins, so…

Read More