Log into your Prepaway Account
Please Log In to download ETE file or view Training Course
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Exam: | 300-115 - CCNP Cisco IP Switched Networks (SWITCH v2.0) |
Size: | 4.51 MB |
Posted: | Sunday, September 3, 2017 |
Download:
|
Cisco.Passit4sure.300-115.v2017-09-03.by.london.158q.ete |
Download Free 300-115 Exam Questions |
Log in to make your opinion count.
Registration is free and easy - just provide your E-mail address.
Click Here to Register
Use Discount Code:
A confirmation link was sent to your e-mail.
Please check your mailbox for a message from [email protected] and follow the directions.
pay attention to the lab
44 Q including 3 Labs + 2 Hotspots
Labs :
1-MLS with EIGRP , Change in AS number and IP
2-AAA with DOT1X
3-LACP with STP
----------
Hotspots were VTP v3 and old HSRP
all questions were same to same from Galvin exam.
Good luck, everyone!
thanks to all.
Infrastructure security 62% - Anyone can point me in direction of which Qs or Simulation that needed more attention.
Maybe I did not follow instructions correctly but used this ete to revise.
i have passed yesterday..dump is 100% valid,
same questions LAB no change
Thanks in advance
Good luck, everyone!
Thank you
all from certprepare.com and Galvin.158.ete dump still WORK.
Labs were same:
HSRP Sim
HSRP Hotspot – old same with new question vlan105′ DSW2 shutdown, there is no priority value and no priority decrement so i’ts defualt 100 for pirority value and the decerment is 10 so when shutdown the answer 90,
LACP with STP Sim same
MLS and EIGRP Sim same with different ips and eigrp AS 65010
AAAdot1x Lab Sim same
in LACP lab when you make etherchannel bundle the command #interface range f0/3-4 will not work #interface range f0/3-f0/4 will work and after you finish check the interfaces if it’s up specially portchannel with command #show ip interface brief,copy run start not work it will SAVE automaticlly but try it,
Special thanks for certprepare team and good luck for you all.
dot1x did everything as per dump.:(
Questions are all from dump and posted coments.
100% Security services
100% Inf services
85% layer 2
Dump Valid HOWEVER like a man cannot live on bread alone you cannot rely on these dumps alone you have to intimately understand the concepts
BAD BAD BAD news for those who memorize the commands because some commands don't work on LABS you have to be resourceful and have some work arounds.
Are there any "Ferris Plastics" questions on the exam?
Also, are there a lot of questions from "Question set1" Exam is this weekend for me.
Thanks a bunch!
Dumps is 100% valid.
I am going to appear 300-115 in next week.There are many scenario based questions specially in volume 1 where i am confused .do we need to configure switch as well or only select option after checking the config using console .
3 labs
1-MLS with EIGRP , AS number and is little bit different
2-AAA with DOT1X
3-LACP with STP
every single question same like here and Glavin Dump
VTP sim Q3 was like Glavin not like cerprepare (sw1 and sw2 in server mode only, no primary server)
Got HSRP Hotspot, HSRP Sim, LACP with STP Sim, MLS and EIGRP Sim, AAAdot1x Lab Sim.
MLS only IPs changed (for g0/1 was 172.16.1.2 for vlan3 192,168.3.65 and vlan 2 192.168.3.33)
i really don’t know what was my fault. where i solved all like metioned her and Glavin
and my scour report was
Layer 2 technologies 88%
Infrastructure Security 100%
Infrastructure Services 100%
i hope it was informative for you
Thank for all
[email protected]
thanks
DUMPS ARE 100% VALID
SIMLETS
HSRP OLD
HSRP NEW (FERRIS PLASTIC)
LABS
AAA DOT1X
LACP WITH STP
EIGRP WITH MSTP
are you saying that there are new questions beyond those in JVD dump, and if yes how many are of those new questions? Are new labs additional labs to existing LACP with STP,AAA,VTPv3, Ferris Plastics? What technologies are in those new Labs?
Thanks a lot!!!
Labs and Sims I got:
VTPv3
HSRP New
AAAdot1x
LACP
Got stuck in LACP, and just couldnt get that trunk to work. Also, quite a lot of commands don't work. Int Range also doesn't work.
Good luck guys, study dump as well as all the labs. Not much has changed. I had seen all the questions before. Just be attentive and don't get confused in the labs!
every single question same like here and Glavin Dump
VTP sim Q3 was like Glavin not like cerprepare (sw1 and sw2 in server mode only, no primary server)
Got HSRP Hotspot, HSRP Sim, LACP with STP Sim, MLS and EIGRP Sim, AAAdot1x Lab Sim.
MLS only IPs changed (for g0/1 was 172.16.1.2 for vlan3 192,168.3.65 and vlan 2 192.168.3.33)
These dumps does not have hotspot question. Can you please confirm, either the hotspot questions coming in exaam ?
This dump is valid. Have 6 new questions, 5 of Haru's comment and 1 at below (LACP) of Shangwani's comment, i wrong this question, i mistake Switch MAC Add and Port Mac Address.
After check dump, i wrong about 5 questions. I think i wrong at Haru's question, i don't know best answer.
2 Lab: LACP with STP and AAA. At LACP with STP, i don't config "default gateway", because Switch B ping successfully to Router.
2 Sim: VTPv3 and VTP2 Lab.
And HSRP Hotspot.
Good luck everyone!
Everything's fine nothing has changed .
I don know about Galvin but i used only JvD ete...All questions came from it..It has all the new questions...Just practice it u shall pass..
Thanks for the info & wishes mate!
any updates regarding the dump ??
im going to take the exam tomorrow Isa whats new ?
Labs LACP, AAA, MLS-eigrp
Exam pattern is changed little bit,
I guess around 8 questions were new
Total 36 questions.
With HSRP old and New
LACP with STP lab
AAAdot1x lab
(No MLS EIGRP lab)
Dumps need to be updated now
ANyways thanks again
36 Questions but plenty of Sim's
I revised everything including multiple choice, simulations which I knew from memory, not sure of failure but low score was related to Infrastructure Security 67%.
Labs -
1. LACP-STP (IP was changed),
2. AAA (IP was changed but am not sure if commands were saved wr / copy run start)
3. HSRP (Ferris Plastics - 6 Qs)
4. VTP3 5/6 Qs
I would advise to make sure you are comfortable with the commands and technology, it is possible the switches did not save or I simply got them completely wrong as they were the wrong answers.
Disappointed:(
Labs LACP, AAA, MLS-eigrp .
still valid
thanks guys..dumps still very much valid
1- Mls with eigrp
2- lacp with stp
3- AAA Dot1x
interfaces and ip addresses are litle change
it still valid
All questions from Galvin + Haru's new questions (36 in total including Labs)
AAAdot1x, LACP, Ferris, VTP v3
A network engineer is installing a switch for temporary workers to connect to.
The engineer dose not want this switch participating in Spanning Tree with the rest of the network, however, end user connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUignore
B. BPDUGuard
C. BPDUblock
D. BPDUdisable
E. BPDUfilter
correct is EEEEEEEE
BPDUFILTER!!!!!!!!!!!!!!!!!!!!!!
Practice all the labs
44 Q including 3 labs
1-MLS with EIGRP , AS number and IP have changed
2-AAA with DOT1X
3-LACP with STP
All labs from certprepare..
I've finished this one on 1st April. This dump is valid and this is complete. But, the only little problem is we can't use "Range" command in LACP-STP lab. Just pay a little attention for it. Thanks.
100% valid i passed today
score 975
good luck all
Still valid 100% .
Best of Luck Guys.
AAA dot1x,HSRP,FERIS, VTPv3, Lacp-stp
Labs are VTPv3 Sim, LACP with STP Sim, MLS/EIGRP Sim, AAAdot1x Lab Sim, and HSRP Hotspot
B- spanning-tree portfast bpduguard enable
C- no spanning-tree link-type shared
D- spanning-tree bpduguard default
Answer: B NO NO NO!
NO you are wrong here. Tricky Part.
Checked in real environment switch:
spanning-tree portfast bpduguard enable –> command does not exist in GC mode BUT
spanning-tree portfast bpduguard default –> command exist
spanning-tree portfast bpduguard enable –> does not exist on interface mode BUT
spanning-tree bpduguard enable –> command exist
Carefull the CLI spanning-tree portfast bpdufilter default –>exist in GC mode
This DUMP is still 100% valid in india too
AAAdot1x,vtp,ferries,Lacp,
I did mistake in LACP Lab so pls be carefull and rest all the questions are same as in dump
Please if anyone has the updated dumps, share it :(....
Labs LACP, AAA, MLS-eigrp
(trunk configured between switch A and router A).
aaadot1x - same lab
Mls with eigrp - different ips and AS 65010
lacp with stp,be careful of this lab in the etherchannel range the command
(config)#interface range f0/3-4 not enough should be
(config)#interface range f0/3-f0/4
and after finish check the portchannel if it's up in both switch a and b
sim
vtpv3 and hsrp old and new sim.
and good luck for how will take this exam.
Having one doubt on labs. Please help in clarifying that. I read in the above comments that in Labs, saving does not work (neither “copy run start” nor “wr”) ; so after we are done with configurations and verifications , how do we proceed further, Just click on “Next” without saving the configs?
Please help me on this,as i have exam tomorrow
Exam pattern is changed little bit,
I guess around 5 questions were new
Total 36 questions.
With HSRP old and New
LACP with STP lab
VTP Version 3
AAAdot1x lab
All labs the same in the dump
(No MLS EIGRP lab)
you can't use no copy run start
&show vlan brief
I'm sure I was ansewr like a dump but I don't know why I got a low score !!
good luck for all
It is true that now we need new dumps for preparation. If u know the concepts then only u can go through. but exam fees is prior concerned here. So If u have your concepts clear then only go with these dumps now. It is first time when i passed with such a low score. Best of luck guys..
LACP with STP Sim
MLS and EIGRP Sim
AAAdot1x Lab Sim
LACP with STP Sim
MLS and EIGRP Sim
AAAdot1x Lab Sim
labs:
EIGRP MLS
AAAdot1x
LACP+STP
Hotspots are
VTP v3 and new HSRP
note: LACP lab is kind os buggy. inspite of lots of efforts u make etherchannel wont go up.. took me an hour to finish this lab.. was able to make po1 up finally... dnt use trunk command on interface fa0/3 - 4... it shuold be run on po1.. contact me if u need any help regarding switch exam.... [email protected]
dump still valid... 44 questions
I just finished the exam but unfotunatley failed with 770 score, I studied the material but rely a lot on dumps, there are around 10 new questions, I think the answer of dump should be reviewed because I almost answer with same in the exam even if I am not totally convinced, anyway if cisco countinue in the same, it will lost a lot if cisco fans, it was really disappointed
this exam is 100% valid.
infrastructure 100%
l2 80%
security 67%
Good luck all
Global: if you enable BPDUfilter globally then any interface with portfast enabled will not send or receive any BPDUs. When you receive a BPDU on a portfast enabled interface then it will lose its portfast status, disables BPDU filtering and acts as a normal interface.
Interface: if you enable BPDUfilter on the interface it will ignore incoming BPDUs and it will not send any BPDUs. This is the equivalent of disabling spanning-tree , the mean that this switch will not participating in Spanning Tree with the rest of the network.
and where can i find a cheapest center to take the exam.
Thank you and good luck for all
Any Help and advice for this ETE ,Does it valid ?? i need to buy it and i need to pass this exam in this days ...
Brothers help me as soon as possible
from uk
just passed the test today with 811.. did a mistake with the Do1x sim
sims,
LACP
DO1X
Thank you all
please share your ideas for me and others to understand and prepare a strategy before joining the exam
I confirm the dump is 100 % valid.
read, understand and practice .....
"Ferries" is actually a lab whith a company named "Ferries Plastics" with several questions. Look in the later questions of JvD dump.
how can i open this ete file? do i have to download any program?
Hamdoullah.
passed today with score 906
pls i need your help all of You guys
Today I passed Switch 300-115 core , I’m just stay at home after distance over 250 km to VUE from here.I always take note that I still recommend me to understand thoroughly material and I done very well with 1000 score !!!!!!
Thank you so much all everything .
It’s time to continue for Tshoot exam , the end of CCNP .
Lab : AAAdot1x , LACP with STP , Ferris, VTVv3, HSRP
material’s same same JvD 164 .
Good luck guys !
We need help!!!
Majority seem to be getting Labs AAA, LACP-STP, MLS-EIGRP from the LAB part, would preping only for that do?
Tips - All material is here but you need to know your commands and understand the technology, else don't waste your time attending.
Used Galvin (158) ete and used jvd.ete 164 qs
Multiple choice - same
Labs - LACP, AAA, VTPv3, Ferris Plastics
LACP - practice using Packet Tracer labs from 9tut.com
Need to check status of Switch before and after completion of Lab using commands:
Show run config, Sh interfaces Trunk,
Sh Etherchannel summary, show Vlan, Show Spanning-tree
Check using - Show ip int brief
On Switch B - Switchport mode trunk encapsulation, Also ping the DG of router
Switch A - Ping Switch B and Router
You can find out IP by sh cdp neigh detail on switchA
It is possible host could be changed so need to focus on Lab carefully, else you can input commands on wrong switch.
AAA Lab - Sh run config, ensure F0/1 is in switchport mode access and part of Vlan 20, No Shutdown
I also named the map to myname and I did add the
VLAN Access-MAP ******* 20
Action Drop
(even though there is implicit deny on ACL
I added it to the config even though didn't need to.
Sh vlan-access map
Any new Multiple Choice Qs - used jvd.ete 164 qs and answers related to switch always selected bdpu filter
Any Qs I will try to answer over the next few days as I have checked the PDF dump I have.
It is requested to all my best
Friends that i need for urgent help.
My friends i am CCNA and CCNP Certified
But Now My CCNA and CCNP
Certification will expired.
Ist told me that which paper i give
Through which my certification are extend.
2nd told me the procedure that how i can receive lattest dumps.
Brothers help me as soon as possible
While i have only 29 days.
Told me which one is easy that
I will prerpired in less time.
Brothers if any one have Updated dumps of
CCNP Routing. Switching. Security or Voice
plz send me.
can any one confirm if dump is still valid or not??
coz some said it aint 100% valid
plzzzzzz rply me bak ASAP
44 Q including 3 labs + 2 hotspots
labs :
1-MLS with EIGRP , AS number and IP have changed
2-AAA with DOT1X
3-LACP with STP
----------
Hotspots are VTP v3 and new HSRP
all questions are identical from Galvin exam
Thanks prepaway, Actualtests and galvin.
but . .
this is not applicable to you if you pass your previous exams just by using dumps
i got 965/1000
Or could anyone help me with ETE simulato full version. I have to write exam on 11th June
Thaks
For the LACP simulation solution, why is there no mention of VTP in the configuration solution? I didn't see any VTP mode being set on either switch...is this solution valid or not? I went to 9tut and looked at this lab and the answer was completely different...someone can you please tell me which solution is the correct one? I have my exam saturday. Thanks
Guys,
This dump still valid?
Can any one please confirm if these Dumps are still valid to pass the exam.
every single question same like here and Glavin Dump
VTP sim Q3 was like Glavin not like cerprepare (sw1 and sw2 in server mode only, no primary server)
Got HSRP Hotspot, HSRP Sim, LACP with STP Sim, MLS and EIGRP Sim, AAAdot1x Lab Sim.
MLS only IPs changed (for g0/1 was 172.16.1.2 for vlan3 192,168.3.65 and vlan 2 192.168.3.33)
i really don’t know what was my fault.
but the TSHOOT not valid till now
A network engineer is installing a switch for temporary workers to connect to. The engineer does
not want this switch participating in Spanning Tree with the rest of the network; however, end user
connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable
good afternoon sir,
how many labs in dump? kindly please your support.
call me at: 00966564851963.
is dump still valid, please let me know
i dont have much time to retake if i am fail.
please update about labs also, what are the changes,
Hey Ramya please tell me what ate the new labs you have seen, because from india only you guys are failed, so i want to know if labs really changed, then i wll prepare better,
if you remember labs please share with me
thanks in advance
Oraaaaaaaaaaaaaa
Certprepare Your are the best, Did u Know?
Passed CCNP Switch 300-115 exam with Complete Score 1000/1000
Next Step is CCNP Tshoot 300-135 Exam InshaAllah
i passed on 3 day ago 960
Still valid 100%
labs are the same from the dump
Mls with eigrp, lacp with stp. AAA Dot1x
you can use any name. instead of PASS you can put "Angel" as well.
Good Luck
All Questions from here only. Took more time for LACP Lab. Practice well and go for exam. All the best... :)
1-HSRP Sim
2-LACP with STP Sim
3-MLS and EIGRP Sim
4-AAAdot1x Lab Sim
5-the lab for hsrp in the dump Q 13
No drag and drops @Zakir
All Q's from this file
Thanks in advance
or still the same questions can any body help me
if not how is everyone opening these new files?
Hello Angel,
As for your question, you can use any name you like for the access map.
like:
# vlan access-map map_name [ 0-65535 ]
Please review the VLAN ACL.
Thanks,
i will writing the exam after four days..
is it still valid?
thanks
44 Q including 3 labs + 2 hotspots
labs :
1-MLS with EIGRP , AS number and IP have changed
2-AAA with DOT1X
3-LACP with STP
----------
Hotspots are VTP v3 and new HSRP
all questions are identical from Galvin exam
i am from india, going to write this weekend.
dump is still valid. less than 5 new question
lab/simulation is lacp & aaa
the lab question appears at the start of the exam. spend a long time on it as i dont have much hands-on experience. as i have no idea how many lab question there are, i had to rush through the other questions. at the end of the test, i still have 60 mins left :(
Good luck, everyone!
i have this exam next week !!
I want to contribute with you and help. the new cuestions:
When troubleshooting a network problem, a network analyzer is connected to Port f0/1 of a LAN
switch. Which command can prevent BPDU transmission on this port?
A. spanning-tree portfast bpduguard enable
B. spanning-tree bpduguard default
C. spanning-tree portfast bpdufilter default
D. no spanning-tree link-type shared
Answer: C
Which four LACP components are used to determine which hot-standby links become active after
an interface failure within an EtherChannel bundle? (Choose four.)
A. LACP system priority
B. LACP port priority
C. interface MAC address
D. system ID
E. port number
F. hot-standby link identification number
G. interface bandwidth
Answer: A,B,D,E
RSPAN has been configured on a Cisco Catalyst switch; however, traffic is not being replicated to
the remote switch. Which type of misconfiguration is a cause?
A. The RSPAN designated VLAN is missing the remote span command.
B. The local and remote RSPAN switches are configured using different session IDs.
C. The local RSPAN switch is replicating only Rx traffic to the remote switch.
D. The local switch is overloaded with the amount of sourced traffic that must be replicated to the
remote switch.
Answer: A
After UDLD is implemented, a Network Administrator noticed that one port stops receiving UDLD
packets. This port continues to reestablish until after eight failed retries. The port then transitions
into the errdisable state. Which option describes what causes the port to go into the errdisable
state?
A. Normal UDLD operations that prevent traffic loops.
B. UDLD port is configured in aggressive mode.
C. UDLD is enabled globally.
D. UDLD timers are inconsistent.
Answer: B
To follow the Layer 2 switching guidelines, a network engineer decides to create a separate
spanning tree for every group of 10 VLANs. Which version of spanning tree is appropriate to meet
the company policy?
A. MST
B. PVST+
C. RSTP
D. RPVST+
E. STP
Answer: A
A network engineer is installing a switch for temporary workers to connect to. The engineer does
not want this switch participating in Spanning Tree with the rest of the network; however, end user
connectivity is still required. Which spanning-tree feature accomplishes this?
A. BPDUblock
B. BPDUfilter
C. BPDUignore
D. BPDUguard
E. BPDUdisable
What is the result of the SPAN configuration on a Cisco switch?
A. Configure a SPAN session to monitor the received traffic on interface g0/4 only for VLAN 3.
B. Configure a SPAN session to monitor the received traffic on interface g0/4 for all VLANs except
VLAN 3.
C. Configure a SPAN session to monitor the received traffic on interface g0/5 only for VLAN 3.
D. Configure a SPAN session to monitor the received traffic on interface g0/5 for all VLANs except
VLAN 3.
Is dump is valid one. going for exam monday. kindly let me know
Good luck, everyone!
It is requested to all my best
Friends that i need for urgent help.
My friends i am CCNA and CCNP Certified
But My CCNA and CCNP
Certification will expired.
Ist told me that which paper i give
Through which my certification are extend.
2nd told me the procedure that how i can receive lattest dumps.
Brothers help me as soon as possible
While i have only 29 days.
Told me which one is easy that
I will prerpired in less time.
can I ask what are the likely sim labs that will come out for switch exam? Thanks for the help!!
Valid 100% pass today 16-9-2017 score 918/1000
Sam/Virat can anyone confirm me that all the simulations were from dump only? were their any change in the simulations?
I am going to take exam on this 10th... so please let me know I m bit tensed.
Thanks
Thx
What is the priority value of the VLAN 105 HSRP group on DSW2
Everywhere the answer is 100 (including galvin dumps), but it should be 150 right?
It doesn't say the interface was shut so if we look on "show standby" command, the current priority for vlan 105 is 150 and DSW2 is the active,
DSW1 is the standby with 100 of priority for vlan 105. They ask the priority of vlan 105 HSRP group on DSW2!!! so it should be 150, right?
dump is 100% valid!
100% from this Damp..! VALID 👍
44 questions
LAB: 3
AAAdot1x
LACP
MPL- eigrp
100% from this Damp..! VALID 👍